PRODUCTS

Features:

• UL/ULC, ITS and ICC-ES Listed – designs for many types of steel sections. Up to 3 hour fire ratings for both interior general purpose and interior conditioned space applications.
• Decorative Finish – Gives a smooth, decorative finish. Compatible topcoats available in a wide range of colors.
• Advanced fiber free formulation - dust free surface.
• Durable finish – Provides a hard, impact and abrasion resistant surface.
• Topcoat finishes smooth to slight orange peel.
• Thin film coating – space saving smaller column footprints.
• Low VOC content.
• LEED compliant

Features:

• Carboclean Cons 200 is used to remove oxides (rust), chalk, magnetite, humus, salt, concrete, shell, algae and other deposits. Well-suited for internal treatment of pipes and piping systems made of metals and plastic-/polyester products. Does not damage paints, plastics, metals, linings or packings.

Features:

• Carboclean Gel 100 is used to remove oxides (rust), chalk, magnetite, humus, salt, concrete, shell, algae and other deposits. Well-suited for treatment of ceilings, walls and other surfaces treatment of metals and plastic-/polyester products. The gel tixotropy gives the product time to work without sagging and drying out. Does not damage paints, plastics, metals, linings or packings.

Features:

• • Fast Dry Properties.
• • Can be applied down to 4°C (39°F).

Features:

• Rapid cure
• VOC compliant for most areas
• Good for filling properties on rough and pitted steel
• Fast dry to handle properties

Features:

Features:

Features:

Features:

• One component product
• Excellent flexibility
• Good abrasion resistance
• Can be applied by Airless- and conventional spray, roller and brush
• Good color and UV resistance

Features:

Features:

• Corrosion resistant coating with zinc phosphate corrosion inhibitor
• Good for extended exposure demands
• Heavy-metal free
• VOC compliant for most areas
• Accepts wide range of topcoats

Features:

• Carbocoat AQ 3327 Primer is used as a primer for cast iron and other steel applications.

Features:

• Carbocoat HT Finish is designed for use in various industrial service. A versatile finish coat for OEM products, agricultural equipment, pumps
• etc..

Features:

• Carbocoat HT Primer can be used for all industrial service in normal corrosive
• environment. Recommended for OEM and maintenance applications.

Features:

• Used where a high standard of corrosion protection is required.
• Excellent for use in chemical industry, offshore, power and other heavy industry.

Features:

• • Excellent weatherability.
• • In accordance with CEI EN 60079.

Features:

• Suitable as a final coat for many coating systems, or as a refresher coat over existing protection to upgrade weathering protection and colour retention of chalked and faded coatings. An ideal colour coat for railing, colours coded
• pipes, decorative trim, safety equipment, etc. Recommended for superstructures, decks, topsides etc.

Features:

• Isocyanate free
• Offers excellent corrosion and weathering protection.
• NORSOK Approved for offshore
• Recommended for chemical industry, offshore, power and heavy industry.

Features:

• Carbocrylic 3325 Primer is used as a primer for cast iron and steel constructions.

Features:

• Single component
• Resistant to flash rusting
• Outstanding corrosion protection
• Low odor, low VOC

Features:

• Single component
• Fast drying
• Low VOC

Features:

• Multi-purpose interior/exterior coating
• Excellent color and gloss retention
• Single component
• Outstanding corrosion protection
• Low odor, low VOC
• Acceptable for use in USDA facilities

Features:

• Smooth, attractive, high build finish
• Excellent weatherability, gloss and color retention
• Low odor
• Excellent corrosion protection
• Meets most VOC (Volatile Organic Content) regulations
• Excellent resistance to flash rusting
• Outstanding application characteristics
• Dry-fall* properties
• Suitable for use in USDA inspected facilities

Features:

• Single component
• Fast drying
• Low VOC

Features:

• Excellent abrasion and impact resistance
• Economical, high solids coating system
• Especially suited for helidecks, hull exteriors,
• splash zones of offshore structures, industrial floors and other areas exposed to high abrasion and impact such as underwater hulls of ships operating in icy waters

Features:

• Outstanding marine exposure resistance (atmospheric, tidal, subsea)
• Excellent resistance to both organic and mineral acids
• Excellent abrasion and impact resistance
• Excellent resistance to bleach solutions and free chlorine
• Outstanding long-term protection

Features:

• Ideal for long-term protection in marine exposure above and below water, including splash zones.
• Used as a tank lining and for areas exposed to many acids, hypochlorites and free chlorine.
• Recommended for protection of steel on areas exposed to extreme abrasion, - contact Carboline for specific recommendations.

Features:

• Very high solids("Solvent less") self - priming coating
• Excellent corrosion resistance to marine/chemical environments
• Excellent corrosion resistance to sea and fresh water immersion
• Excellent corrosion resistance to buried pipes and tanks
• Excellent resistance to mechanical and abrasion damage
• Excellent resistance to cathodic disbondment
• Excellent resistance to electric insulation (12000 volts/mm)

Features:

• Very high solids "Solvent-less", self-priming coating
• Excellent corrosion resistance to marine/chemical environments
• Excellent corrosion resistance to buried pipes and tanks
• Excellent resistance to mechanical and abrasion damage
• Excellent resistance to cathodic disbondment
• Excellent resistance to electric insulation (12000 volts/mm)

Features:

• Excellent corrosion resistance to marine/chemical environments
• Excellent corrosion resistance to sea and fresh water immersion
• Excellent corrosion resistance to buried pipes and tanks
• Excellent resistance to mechanical and abrasion damage
• Excellent resistance to cathodic disbondment
• Excellent resistance to electric insulation (12000 volts/mm)

Features:

• Superior abrasion resistance
• Excellent resistance to aerated seawater and various other chemicals
• Excellent immersion performance
• Easy to repair
• VOC compliant to current AIM regulations

Features:

• Excellent abrasion resistance
• Excellent chemical resistance
• Outstanding impermeability
• Single coat, self-priming capabilities
• VOC compliant to current AIM regulations
• Non-skid surface (optional)

Features:

• Excellent abrasion resistance
• Excellent corrosion resistance
• Can also be used in water immersion and splash zone areas
• NORSOK system 7A and 7B pre-qualified

Features:

• Exceptional wetting characteristics
• Low stress, highly flexible film
• Very high solids
• Low odor
• User-friendly brush & roller application
• VOC compliant to current AIM regulations

Features:

• Excellent penetrating and adhesion properties
• Used over concrete and cementicious fire protection materials to secure proper
• topcoat adhesion

Features:

• • Excellent corrosion resistance.
• • Cured film is tough and abrasion resistant.
• • Can be used as tie-coat over inorganic zinc silicate and metallized steel.
• • Widely used within petrochemical, off-shore and naval industries.

Features:

• Low odor and low VOC
• Available in a variety of colors
• Attractive medium sheen for tank exteriors
• Good chemical resistance
• Used as a primer, intermediate, or finish coat
• Fast cure & dry times
• Can be applied over power tool cleaned surfaces
• VOC compliant to current AIM regulations
• Good abrasion resistance

Features:

• • Low temperature cure.
• • Excellent corrosion protection.
• • Excellent application characteristics.
• • Fast recoat time.
• • Moisture tolerance during application.
• • Extended recoat window for atmospheric exposure (6 months for most part of
• topoats).

Features:

• Widely used within offshore- and shipping industries on top of metallized surfaces and zinc silicate where excellent corrosion resistance is expected.

Features:

• Fast overcoatable with 2K topcoats
• Excellent anti-corrosive properties
• Applicable as one-coat system up to corrosion class C4 (ISO 12944-2)
• Applicable up to corrosion class C5(H) with suitable primer
• Excellent flowability, also at low DFT
• Very good abrasion resistance.

Features:

• Low temperature cure (20°F)
• Excellent corrosion protection
• Excellent application characteristics
• Fast recoat times
• Moisture tolerance during application
• Continues to cure underwater
• Extended recoat window for atmospheric exposures (6 months for most topcoats)
• Meets IMO Performance Standard for Protective Coatings MSC.215(82): 2006 for sea water ballast tanks

Features:

• Low temperature cure (20°F)
• Excellent corrosion protection
• Excellent application characteristics
• Fast recoat times
• Moisture tolerance during application
• Continues to cure underwater
• Extended recoat window for atmospheric exposures (6 months for most topcoats)
• Low VOC and low HAPs content
• Certified by UL to meet the drinking water criteria of NSF/ANSI/CAN 600
• Meets IMO Performance Standard for Protective Coatings MSC.215(82): 2006 for sea water ballast tanks

Features:

• High solids, low VOC
• High build (16 mils)
• Low temperature cure (20°F)
• Excellent moisture tolerance during application
• Continues to cure underwater
• Fast cure response
• Suitable for use in USDA inspected facilities

Features:

• High solids, low VOC
• High build (20+ mils)
• Low temperature cure (20°F)
• Excellent moisture tolerance during application
• Continues to cure underwater
• Fast cure response
• Excellent physical and barrier properties

Features:

• Good corrosion resistance
• Meets requirements for category C5M in accordance to ISO 12944-2
• Cured film is tough and abrasion resistant
• Widely used within commercial infrastructure
• Can be applied over power tool cleaned surfaces
• Can be used under certain Carboline fireproofing materials

Features:

• Excellent film build and edge protection
• Surface tolerant characteristics
• Cures at low temperature
• Self-priming and primer/finish capabilities
• Meets NORSOK System 7B, Rev. 6 requirement for submerged steel and NORSOK System 7C to 90°C

Features:

• Ready to apply after mixing; no sweat-in time or thinning required
• Economical fit for use epoxy
• Available in a variety of rapid tint colors
• Attractive low sheen for tank exteriors
• Used as a primer, intermediate, or finish coat
• Power tool cleaned surfaces acceptable
• Optional low temperature (LT) cure Part B
• VOC compliant to current AIM regulations

Features:

• • Ready to apply after mixing; normally thinning is not required.
• • Economical fit for use epoxy.
• • MIO contents on dry film thickness: 10%.
• • Used as a primer, intermediate or finish coat.
• • Power tool cleaned surfaces acceptable.

Features:

• Excellent chemical resistance
• Surface tolerant characteristics
• Conventional and low-temperature versions
• Self-priming and primer/finish capabilities
• Very good abrasion resistance
• VOC compliant to current AIM regulations
• Suitable for use in USDA inspected facilities
• Intermediate coat for AWWA D102 Outside System #6 and #7
• Approved MPI #98

Features:

• Excellent chemical resistance
• Surface tolerant characteristics for less severe applications
• Low-temperature version: 890 LT GF
• Self-priming and primer/finish capabilities
• Excellent abrasion resistance & hardness
• VOC compliant to current AIM regulations
• Non-skid service with optional fillers

Features:

• Excellent chemical resistance
• Surface tolerant characteristics
• Low-temperature cure formulation
• Self-priming capability
• Very good abrasion resistance
• VOC compliant to current AIM regulations
• Suitable for use in USDA inspected facilities

Features:

• Can be applied direct to steel without a primer
• Single coat, high build capabilities
• Can be applied to minimally prepared surfaces
• Compatible to many existing, aged epoxies and inorganic zinc coatings
• Easily decontaminated
• DBA tested and qualified for Nuclear Service Level 1
• Resistant to high levels of radiation
• High solids and low VOC help reduce effects on charcoal filters
• Application-friendly characteristics minimize manrem exposure
• Suitable for use under insulation on hot surfaces operating up to 300°F (149°C) outside level 1 areas.

Features:

• Excellent film build and edge protection
• VOC compliant to current AIM regulations
• Complies with EU 1935/2004 criteria for food contact.

Features:

• Meets the FDA requirements for 21CFR 175.300 for direct food contact
• Meets the requirements of AWWA C210
• Ultra High solids; Low VOC and HAPs
• Handles deionized water up to 150°F (66°C)
• Ultra low VOC (67 g/l)
• Good chemical resistance
• Excellent thermal shock resistance
• Good abrasion resistance

Features:

• Excellent corrosion protection
• Excellent film build and edge protection
• Used as a primer or an intermediate coating
• Good abrasion resistance
• Cures down to 40°F (4°C)
• VOC compliant to current AIM regulations

Features:

• Ready to apply after mixing; no sweat-in time or thinning required.
• Economical fit for use epoxy
• Available in a variety of rapid tint colors
• Attractive low sheen for tank exteriors
• Used as a primer, intermediate, or finish coat
• Power tool cleaned surfaces acceptable
• Optional low temperature (LT) cure Part B
• VOC compliant to current AIM regulations

Features:

• Ready to apply after mixing; no sweat-in time or thinning required.
• Economical fit for use epoxy
• Available in a variety of rapid tint colors
• Attractive low sheen for tank exteriors
• Used as a primer, intermediate, or finish coat
• Power tool cleaned surfaces acceptable
• VOC compliant to current AIM regulations

Features:

• Ready to apply after mixing; no sweat-in time or thinning required.
• Economical fit for use epoxy
• Used as a primer or intermediate coat
• Can be applied over power tool cleaned surfaces
• Micaceous iron oxide (MiO Filler) for additional barrier properties and corrosion resistance: MiO is purchased separately
• Optional low temperature (LT) cure Part B
• VOC compliant to current AIM regulations

Features:

• Exterior coating for railcars applied in one coat by plural component equipment.

Features:

• Good abrasion resistance
• Free of solvents
• Low water absorption – no swelling
• Chemical resistant to industrial and sea atmosphere, sweet, brackish and salt water, neutral salts, mineral and heating oils, fatty oils, chlorine free detergents, etc.
• Normally used as 1 coat system

Features:

• Excellent corrosion resistance
• Fast drying at low temperatures
• Cured film is tough and abrasion resistant
• Used 40% diluted as a tie-coat over zinc silicate and metallized steel
• Excellent adhesion to aluminium
• Widely used within petrochemical-, offshore and shipping industries

Features:

• Excellent corrosion resistance
• Cured film is tough and abrasion resistant
• Used 40% diluted as a tie-coat over zinc silicate and metallized steel
• Excellent adhesion to aluminium
• Widely used within petrochemical-, offshore and shipping industries

Features:

• Versatile general purpose epoxy primer
• Excellent for use as a "holding primer"
• Good resistance to salts, water and alkalis
• Can be used as a "tie-coat" over zinc silicate, metallized steel and aluminium
• Widely used within the petrochemical, offshore and shipping industries
• Very good abrasion resistance

Features:

• Versatile general purpose epoxy primer
• Excellent for use as a "holding primer"
• Good resistance to salts, water and alkalis
• Can be used as a "tie-coat" over zinc silicate, metallized steel and aluminium
• Widely used within the petrochemical, offshore and shipping industries
• Very good abrasion resistance

Features:

• Offers excellent corrosion and weathering protection.
• NORSOK Approved for offshore
• Recommended for chemical industry, offshore, power and heavy industry.

Features:

• Designed for brush and roller application for touch up and maintenance
• Can be applied as primer, mid coat and top coat or as single coat system
• Can be applied in areas where ideal surface preparation is unachievable
• Excellent immersion performance in both fresh and sea water.
• Suitable as a rust preventing coating in ballast tanks.
• Ideal for subsea installations, jackets and other areas prone to condensation
• Very good abrasion resistance

Features:

• Designed for brush and roller application for touch up and maintenance
• Excellent anti-corrosive properties
• Self-priming capability
• Fast recoat time
• Excellent leveling with good corrosion protection, also at low DFT
• Very good abrasion resistance
• NORSOK System 1 and 7B pre-qualified
• Excellent for atmospheric and submerged corrosion protection

Features:

• Carbo-Kit Carbothane 133 HG is designed for brush and roller application for maintenance and is used when there are high requirements for corrosion protection. Extremely suitable for use in chemical industry, offshore, hydropower and other heavy industry.

Features:

• Designed for brush and roller application for touch up and maintenance
• High gloss surface
• Often used where polyurethane coatings are not desired.
• Excellent for use in chemical industry, offshore, ships, bridges, hydropower and other heavy industry.

Features:

• Designed for brush and roller application for touch up and maintenance
• Outstanding application properties
• Protects steel galvanically
• Cures at low temperatures down to 2°C
• Cured film is tough and abrasion resistant
• Widely used within petrochemical-, offshoreshipping- and other heavy industries in severe environments with appropriate topcoat
• No induction time
• Prequalified in accordance with NORSOK M-501, Rev.6 System 1.

Features:

• Full jet fire certification in accordance with ISO 22899
• Excellent hydrocarbon pool fire protection (ISO 834/BS-476)
• LR, DNV & ABS certification
• Successfully passed Norsok M-501 System 5A environmental test program without a topcoat
• Superior weathering resistance
• Very low moisture absorption
• Explosion resistance
• Extremely durable, impact resistant finish
• High film build properties
• Low flame spread and smoke development

Features:

• Unique formulation with lamellar aluminum flakes for exceptional barrier protection
• Excellent performance over minimal surface preparation of steel substrates
• Suitable as a topcoat for most tightly adhered existing coatings
• Excellent choice for field touch-up of zinc-rich primers and galvanized steel
• Available in a low temperature cure version (Carbomastic 15 FC)
• Suitable for use under insulation on hot surfaces operating up to 300 °F (150 °C)
• VOC compliant to current AIM regulations

Features:

• Unique formulation with lamellar aluminum flakes for exceptional barrier protection
• Excellent performance over minimal surface preparation of steel substrates
• Suitable as a topcoat for most tightly adhered existing coatings
• Excellent choice for field touch-up of zinc-rich primers and galvanized steel
• May be applied at 35°F (2°C) when CM 15 FC's part B is utilized
• Suitable for use under insulation on hot surfaces operating up to 300°F(150°C)
• VOC compliant to current AIM regulations

Features:

• Surface tolerant
• Recommended for painting over rusted steel where hand cleaning only is possible
• Carbomastic 15 LT penetrates through rust to steel substrate and stops further corrosion and undercutting
• Fast curing at low temperatures
• High solids give good coverage and reduced solvent emission
• Excellent maintenance primer for piping, bridges, tank exteriors, ships and offshore structures etc..

Features:

• • Carbomastic 15 LT Atex has fast curing at Low Temperature (ambient).
• • High solid give good coverage and reduce solvent emissions.
• • In accorsance with CEI EN 60079.

Features:

• Excellent immersion performance in both fresh and sea water
• Suitable as a rust preventive coating in ballast tanks and hull applications
• Ideal for sub-sea installations, jackets and other areas exposed to sea water
• Can be applied as low as 5°C (40°F)
• Good flexibility
• Very good abrasion resistance
• VOC compliant

Features:

• Excellent immersion performance in both fresh and sea water
• Suitable as a rust preventive coating in ballast tanks and hull applications
• Ideal for sub-sea installations, jackets and other areas exposed to sea water
• Can be applied as low as 5°C (40°F)
• Good flexibility
• Very good abrasion resistance
• High solids; low VOC

Features:

• Excellent immersion performance in both fresh and sea water.
• Suitable as a rust preventing coating in ballast tanks.
• Micaceous iron oxide (MiO) for additional barrier properties and corrosion resistance
• Ideal for subsea installations, jackets and other areas prone to condensation.
• Very good abrasion resistance.

Features:

• Excellent immersion performance in both fresh and sea water.
• Suitable as a rust preventing coating in ballast tanks.
• Ideal for subsea installations, jackets and other areas prone to condensation.
• Very good abrasion resistance.

Features:

• Suitable as a topcoat for most tightly adhering existing coatings
• Excellent choice for field touch-up of zinc-rich primers and galvanized steel
• Unique formulation with aluminium flakes provides exceptional barrier protection
• Contains 9 % aluminium by weight in the dry film
• Can be used as a one-layer system
• VOC compliant to current AIM regulations

Features:

• Surface tolerant
• Fast curing at low temperatures
• High solids give good coverage and reduced solvent emission

Features:

• • Fast curing at Low Temperature.
• • Used as a primer or intermediate.
• • High solids, low VOC.

Features:

• Single coat application characteristics
• Suitable as a topcoat for most tightly adhered existing coatings
• Dry to handle in 24 hours at 20 °F (-7 °C)
• Extended pot life at low temperatures
• VOC compliant to current AIM regulations
• Moisture curing capabilities in conjunction with cross-linking Epoxy

Features:

• Excellent immersion performance in both fresh and sea water.
• Suitable as a rust preventing coating in ballast tanks.
• Ideal for subsea installations, jackets and other areas prone to condensation.
• Very good abrasion resistance.

Features:

• Excellent performance over minimal surface preparation of steel substrates
• Excellent wetting properties
• Excellent surface tolerance
• Excellent choice for field touch-up of zinc-rich primers and galvanized steel
• Suitable as a topcoat for most tightly adhered existing coatings
• Unique formulation with aluminum flakes provides exceptional barrier protection
• Available in a low temperature cure version (Carbomastic 652)
• Suitable for use under insulation on hot surfaces operating up to 150°C (300°F)
• VOC compliant to current AIM regulations

Features:

• High solids, low VOC
• Low temperature cure
• Excellent wetting properties
• Excellent surface tolerance
• Excellent moisture tolerance (application)
• Continues to cure underwater
• Fast cure response
• Suitable for immersion service in fresh or salt water after 60 minutes cure @ 75°F

Features:

• Incorporates lamellar aluminum flakes to provide exceptional barrier protection
• High solids, low VOC
• Low temperature cure
• Excellent wetting properties
• Excellent surface tolerance
• Excellent moisture tolerance after application
• Fast cure response
• Suitable for immersion service in fresh or salt water after 2 hour cure @ 75°F

Features:

• Excellent anti-corrosive properties
• Self-priming capability
• Fast recoat time
• Excellent leveling with good corrosion protection, also at low DFT
• Very good abrasion resistance
• NORSOK System 1 and 7B pre-qualified
• Excellent for atmospheric and submerged corrosion protection

Features:

• Very good performance over minimal surface preparation of steel substrates
• Suitable as a tie-coat/topcoat for most tightly adhered existing coatings
• Excellent film build on edges
• Can be applied at temperatures as low as 40°F
• VOC compliant to current AIM regulations

Features:

• Low viscosity
• Solvent free
• Excellent anchoring to concrete-based substrates

Features:

• Carboseal SL Floor provide seamless and waterproof surfaces with good abrasion- and chemical resistance. Can be applied with different grades of slip resistance.

Features:

• Outstanding performance properties in both mild and aggressive environments
• High build; suitable for many two-coat systems
• Suitable for application direct to inorganic zincs
• Application by spray, brush or roller
• Indefinite recoatability
• VOC compliant to current AIM regulations

Features:

• Outstanding performance properties in both mild and aggressive environments
• High build; suitable for many two-coat systems
• Suitable for application direct to inorganic zincs
• Application by spray, brush or roller
• Indefinite recoatability

Features:

• Carbothane 133 HG Clear is used where there is a high expectation to finish. Especially recommended for transport equipment, machines and external side of containers and tanks.

Features:

• Exceeds SSPC Paint 36 specification for a Level 3 urethane
• Outstanding performance properties in both mild and aggressive environments
• High build; suitable for many two-coat systems
• Application by spray, brush or roller
• Indefinite recoatability
• VOC compliant to current AIM regulations
• Low HAPs content

Features:

• Excellent weatherability
• Available in most RAL & BS shades
• Excellent flow characteristics allow for application by spray or roller
• Excellent impact and abrasion resistance
• VOC compliant

Features:

• Hard finish with excellent impact and abrasion resistance
• Excellent resistance to UV degradation
• Attractive gloss finish
• Suitable for airless, conventional spray or roller application
• VOC compliant to current AIM regulations
• Indefinite recoatability
• Suitable for use as a metalizing sealer*

Features:

• High solids, low VOC content
• Excellent weatherability
• Exceeds SSPC Paint 36 specification for a Level 3 urethane
• Available in all Carboline colors including metallic-pigmented colors
• Excellent flow characteristics allow for application by spray or roller
• Superior impact and abrasion resistance
• Indefinite recoatability
• VOC compliant to current AIM regulations
• Meets the requirements of AWWA D 102 Outside Coating System (OCS) 5 & 6
• Suitable for use in USDA inspected facilities
• Meets the performance requirements of MIL-PRF-85285E Type II, Class H Polyurethane
• Meets the performance requirements of UFGS 09 97 13.27 Polyurethane Topcoat

Features:

• High solids, low VOC content
• Excellent weatherability
• Exceeds SSPC Paint 36 specification for a Level 3 urethane
• Available in custom colors
• Excellent flow characteristics allow for application by spray or roller
• Superior impact and abrasion resistance
• Indefinite recoatability
• VOC compliant

Features:

• • Excellent resistance to UV degradation.
• • Attractive gloss finish.
• • Suitable for airless, conventional spray or roller application.

Features:

Features:

Features:

Features:

• Excellent weatherability
• Excellent flexibility
• Excellent abrasion resistance
• Available in Carboline’s Rapid Tint System
• Meets most VOC requirements
• Indefinite recoatability

Features:

• • Excellent gloss and color retention.
• • Excellent flexibility.
• • Excellent abrasion resistance.
• • Excellent weatherability.
• • Good performance properties in both mild and aggressive environments.
• • Suitable for application direct to inorganic zincs.
• • Application by spray, brush or roller.

Features:

• Outstanding performance properties in both mild and aggressive environments
• Excellent application properties
• Applicable by spray, brush and roller
• Suitable for application direct to galvanized steel
• Indefinite recoatability

Features:

Features:

• Excellent weatherability
• Excellent flexibility
• Excellent abrasion resistance
• Meets most VOC (Volatile Organic Content) requirements

Features:

• Carbothane 8810 is used where normal corrosion protection properties are required. Particularly suitable for use within the chemical industry, for agricultural equipment and other heavy duty industry.

Features:

• Carbothane 8814 is used where normal corrosion protection properties are required.
• Particularly suitable for use within the chemical industry, for agricultural equipment and other heavy duty industry.

Features:

• Carbothane 8814 FC is used where normal corrosion protection properties are required.
• Particularly suitable for use within the chemical industry, for agricultural equipment and other heavy duty industry.

Features:

• Excellent weatherability
• Excellent flexibility
• Excellent abrasion resistance
• Optimal protection with minimum layer thickness
• Excellent flow behavior with spray and roll application
• Available in many colors
• VOC compliant to current AIM regulation

Features:

• • Excellent resistance to UV degradation.
• • Excellent weatherability.
• • Excellent impact resistance.
• • Excellent abrasion resistance.
• • Attractive gloss finish.
• • Easy application with airless and conventional spray equipment.
• • VOC compliant to current regulations.

Features:

• Excellent thin-film insulation
• Unique formula provides superior coverage during application
• Protects personnel from hot surfaces
• Multi-purpose interior/exterior coating
• Insulation provides anti-condensation properties
• Easy to use
• Zero VOC; Low odor
• May be applied to hot surfaces

Features:

• Excellent thin-film insulation
• Unique epoxy formula outperforms acrylic-based materials
• Tougher and more durable than acrylic coatings
• Higher chemical resistance than acrylic coatings
• Topcoats are optional
• Protects personnel from hot surfaces
• Ideal for industrial/aggressive applications
• Insulation provides anti-condensation properties
• Acceptable for use in USDA facilities
• High film build per coat; fewer coats
• Low VOC; low odor
• May be applied to hot surfaces

Features:

• Welds made over Carboweld 11 coated steel are equal in every respect to welds made to uncoated steel
• Designed to protect steel during construction phase of projects under normal conditions
• Can be topcoated for additional long term protection for atmospheric exposures.
• Weld spatter does not adhere to or damage the coating
• Can be welded as quickly and easily as bare steel at production line speeds without loss in strength or consistency of the weld
• Dries to touch and to handle in 3 to 5 minutes
• Certified as a pre-construction primer for Lloyds Register constructions

Features:

• Protects at least to 6 month in normal atmospheric environments.
• Weld spatter does not adhere to or damage the coating.
• Can be welded as quickly and easily as bare steel at production line speeds without loss in strength or consistency of the weld.
• Dries to touch and handle in 3 to 5 minutes.
• Compliant to IMO MSC.215(82) as shop primer for ballast tank coatings systems.

Features:

• Isocyanate free
• Prequalified in Norsok System 1
• Fully recoatable
• High solids Product
• Can be applied with roller, brush or spray

Features:

• Isocyanate free
• Exceptional weatherability
• Outstanding color and gloss retention
• Exceeds SSPC Coating Specification No. 36 Level 3A
• Excellent corrosion protection
• Meets ISO 12944 C3 High and C4 Medium, one coat applied at 5 to 7 mils DFT
• High build, 3 to 7 mils DFT
• Saves significant time, labor, and money
• Long service life
• VOC compliant
• Excellent durability
• Good flexibility and abrasion resistance
• Long pot life

Features:

• Exceptional weatherability
• Long life performance
• Outstanding gloss and color retention
• Excellent abrasion resistance
• Isocyanate-free

Features:

• Exceptional weatherability
• Especially used where polyurethane coatings are not desired
• Long life performance
• Isocyanate free
• Excellent abrasion resistance
• Excellent for use in chemical industry, offshore, ships, bridges, hydropower and other heavy industry

Features:

• Combined intermediate/topcoat over suitable primers.
• Can be used directly on steel and concrete.
• Excellent for use in chemical industry, offshore, ships, bridges, hydropower and other heavy industry.
• High gloss.
• Isocyanate free.

Features:

• Extremely long service life.
• High gloss surface.
• Fast drying at low temperatures.
• Used for both maintenance and new construction.
• Excellent for offshore installations, ships, trains, airplanes, bridges, refineries, marine structures etc.

Features:

• Meets Class B slip co-efficient and creep testing criteria for use on faying surfaces.
• Rapid cure. Dry to handle in 45 minutes at 16°C (60°F) and 50% relative humidity.
• Low temperature cure down to -18°C (0°F).
• High zinc loading.
• Meets FDA requirements.
• Zinc supplied meets ASTM D520 (Type II). *
• Meets SSPC Paint 20 Type I, Level 1 for zinc content.
• Very good resistance to salting.
• May be applied with standard airless or conventional spray equipment.
• VOC compliant in many areas.

Features:

• Meets Class B slip co-efficient and creep testing criteria for use on faying surfaces.
• Rapid cure.Dry to handle in 30 minutes at 75°F (24°C) and 60% RH
• Can be topcoated in 4-5 hours at 75°F/24°C and minimum 60% RH
• High zinc loading
• Tolerant to mudcracking (up to 6 mils/150 microns)
• Smooth uniform texture reduces topcoat bubbling
• Meets FDA requirements in gray color
• Very good resistance to salting
• May be applied with standard airless or conventional spray equipment
• Low HAPs content of 0.12 lbs/solid gallon

Features:

• Meets Class B slip co-efficient and creep testing criteria for use on faying surfaces
• Rapid cure. Dry to handle in 1 hour at 75°F (24°C) and 50% relative humidity
• Low temperature cure down to 15°F (-9°C)
• High zinc loading
• Very good resistance to salting
• May be applied with airless or conventional spray
• Excellent as a lining for solvent storage
• May be used as a weldable pre-construction primer
• Exhibits long-term corrosion resistance
• Ultra-low VOC level for solvent-based inorganic zincs

Features:

• Excellent corrosion protection
• High zinc loading per square foot
• Zero VOC
• Good resistance to salting
• Fast curing, quick handling
• Weldable version available Carboweld 11 WB
• Excellent application characteristics (less likely to pump packing or tip plug)
• Meets Class B slip coefficient and creep testing criteria for use on faying surfaces.

Features:

• • Easily applicable.
• • Cures at low temperatures, 2°C (35°F).
• • Hard tough film.
• • Good flexibility.
• • Excellent abrasion resistance.

Features:

• • Excellent application properties.
• • Tough abrasion resistant film.
• • Excellent adhesion.

Features:

• Outstanding application properties
• Protects steel galvanically
• Cures at low temperatures down to 2°C
• Cured film is tough and abrasion resistant
• Widely used within petrochemical-, offshore shipping- and other heavy industries in severe environments with appropriate topcoat
• No induction time
• Prequalified in accordance with NORSOK M-501, Rev.6 System 1.
• N.B. an applied film of 90 microns DFT of Carbozinc 858 achieved accredited test certification for NORSOK M-501, Rev 4 System 1.

Features:

• Meets Class B slip co-efficient and creep testing criteria for use on faying surfaces
• Rapid cure. Dry to recoat in 30 minutes at 75°F (24°C) and 50% relative humidity.
• Complies with SSPC Paint 20 (Type II)
• Low temperature cure down to 35°F (2°C)
• Excellent adhesion
• Protects against undercutting corrosion
• Field proven primer that applies well by spray methods
• Excellent touch-up primer by brush or roll for small areas.
• VOC compliant to current AIM regulations
• Approved for MPI #20

Features:

• Outstanding application properties
• Protects steel galvanically
• Cures at low temperatures down to 2°C
• Cured film is tough and abrasion resistant
• Widely used within petrochemical-, offshoreshipping- and other heavy industries in severe environments with appropriate topcoat
• No induction time
• Prequalified in accordance with NORSOK M-501, Rev.6 System 1.

Features:

• Excellent application properties
• Tough abrasion resistant film
• Excellent adhesion & undercutting resistance
• Superior corrosion resistance
• Meets VOC (Volatile Organic Content) regulations
• Fast drying for quick recoating

Features:

• Practical to use when traditional coating removal methods such as abrasive blasting or power tool cleaning cannot be performed due to environmental or health concerns
• Well-suited to remove thick-film elastomers such as polyurethanes and polyureas.
• Is often a more economical removal method over abrasive blasting

Features:

• Fully tested and approved for UNI EN 13381-8 for cellulosic fire for 30,60 and 90 minutes fire duration.
• Easy to apply be spray, roller or brush.
• Gives a smooth matt finish. Compatible top coat of a variety of colours are available if a decorative finish is required.
• Very low VOC. Contains no substances of very high concern.
• Asbestos free
• Can be used in area with limited ventilation.
• Easy to repair

Features:

• Fast cure, early weather resistance, shower proof within 1 hour after application.
• Low VOC
• No solvent entrapment or prolonged solvent odour
• High build potential with all ratings possible in one application
• Designed for on-site and off-site use
• Meets BS476 Part 20/21 up to 120 minutes
• Meets EN13381: Part 6 & 8 Certification
• Meets C1, C2, C3, C4 & C5 Environments Building Classification (ISO 12944)*

Features:

• Water-based Industrial Coating
• Proven technology
• Environmental friendly
• Quick air drying, no baking required
• Easy to mix
• Easy to spray
• Good colour and gloss retention
• Good chemical resistance and mechanical properties

Features:

• Fast curing, tolerates quickly rain exposure
• Forms tough and abrasion resistant coating that protects roof from weather and corrosion
• Very good colour and gloss retention
• Can also be used as weatherable topcoat in epoxy/polyurethane systems
• Tested according to SS184006/SS-EN ISO 6270.

Features:

• Low odor
• Very high solids
• Excellent wetting and flow properties
• Easy 1:1 mix ratio
• One coat system for a variety of substrates including CMU
• VOC compliant to current AIM regulations

Features:

Features:

• Excellent resistance to ethanol, gasoline, jet fuels and solvents.
• Excellent abrasion resistance.
• Excellent thermal shock resistance (0 to 300° F).
• VOC compliant to current AIM regulations.
• Excellent resistance to deionized or demineralized water up to 203°F (95°C).
• Excellent resistance to crude oil up to 250°F (121°C).
• Excellent for crude oil storage and transportation up to 250° F (121° C)
• Recommended for CS-1,3,4 and SS-1,2,3 systems of NACE SP0198 Standard Practice for coatings to control Corrosion Under Insulation (CUI).

Features:

• Low temperature cure (20°F)
• Excellent blast-hold protection
• Suitable for use over damp concrete
• Excellent application characteristics
• Fast recoat times
• Moisture tolerance during application
• Meets VOC restrictions
• Low HAP’s content
• Certified by UL to meet the drinking water criteria of NSF/ANSI/CAN 600

Features:

• Single coat, high performance protection
• Low to no odor
• Easy to apply by standard equipment
• Excellent chemical resistance
• Fast cure
• Tough abrasion resistant film
• Suitable for potable water use (complies with ANSI/NSF Standard 61) *
• Excellent flexibility
• Excellent corrosion protection
• Impact resistant
• Hi-build application in one coat
• Low temperature cure (35°F)
• * (Valid if manufactured at a certified location.)

Features:

• Outstanding overall chemical resistance
• Dense, highly cross-linked film for superior barrier protection
• Excellent abrasion resistance and toughness
• Well-suited for hydrocarbon exposures
• Low temperature cure version available

Features:

• Outstanding overall chemical resistance
• Dense, highly cross-linked film for superior barrier protection
• Excellent abrasion resistance and toughness
• Well-suited for hydrocarbon exposures
• Cures down to 35°F (2°C)
• Meets NORSOK System 7C Requirements for subsea equipment up to 180°C (356°F)
• Certified for UNE 48307 - Type I, classes I, IIA, IIB, IIA & IV

Features:

• Rapid cure-to-handle and cure-to-service characteristics
• Single coat application reduces labor costs
• Ultra-high build capabilities provide a void-free film and excellent edge protection.
• Resistant to inorganic and organic acids, caustics and most solvents
• Exceptional bond strength
• Can be mat reinforced where exposure conditions dictate
• VOC compliant to current AIM regulations

Features:

• High solids; Low VOC formula
• VOC compliant to current AIM regulations
• Excellent for crude-oil storage
• Excellent resistance to petroleum products
• Excellent abrasion resistance
• Excellent thermal shock resistance
• Complies with MIL-PRF-4556F testing
• Fully compliant with the EI1541 performance requirements for Aviation Fuel Handling Systems (commonly known as the Jet Fuel Gum Test)

Features:

• Batch mix formulation, single leg airless spray
• High impact resistance
• Superior adhesion to steel
• Excellent resistance to water and salt water
• Resistance to a broad range of fuels
• Passes EI 1541 requirements for internal protective coating systems used in aviation fuel handling systems, including the jet fuel gum test
• Adheres to API 653 inspection and API 652 guidelines for inspection intervals.
• Resistant to hot water up to 180°F (82°C)
• Excellent abrasion resistance and flexibility
• Can be applied down to 35 °F (2 °C)
• Can be applied as a single or multi-coat system
• Non-blushing with a long recoat window
• Low odor

Features:

• Excellent petrochemical resistance (fuels and crude)
• High impact resistance
• Superior adhesion to steel
• Excellent hot water resistance
• Excellent abrasion resistance
• Can be applied as low as 35°F (2°C)
• Tolerates low temperature excursions to 20°F (-7°C) during cure
• Can be applied as a one-coat 20-80 mil system
• Recommended as a petroleum tank bottom lining per API recommended practice 652.
• Tank Shield Plus is a thick film reinforced lining proven to provide integrity at greater than 50 mils
• Non-blushing, single or multi-coat system
• Recommended as a petroleum tank bottom lining per API recommended practice 653.

Features:

• Outstanding resistance to aggressive chemicals
• Suitable for use as a highly chemically resistant lining
• Excellent for splash, spill and film exposures on structural steel
• Glass-flake reinforced film
• High tensile and flexural strength
• High film thickness

Features:

• High Impact Resistance
• Superior adhesion to metal substrates and concrete
• Outstanding adhesion to stainless steel, even with low blast profiles
• Well suited to protect alloy steels typically used to wet FGD systems where pitting and crevice corrosion often occur
• Fast cure-to-service; depending upon application can be placed into service within 36 hours
• Minimal blushing characteristics
• Can be applied in temperatures as low as 35 °F (1.7 °C)
• Can be applied as a one-coat system
• Tested and approved for crude oil transportation up to 350 °F (177 °C)
• Superior thermal shock resistance from -40 to 350 °F (-40-177 °C)
• Complies with the API RP 652 definition of a reinforced liner.

Features:

• High impact and thermal shock resistance
• Superior adhesion to steel and concrete
• Resistance to a broad range of chemicals
• Can be applied up to 60 mils in one coat
• Can be sprayed using single component airless equipment
• Passes ASTM G210 - Severe Waste Water Analysis Test (SWAT)

Features:

• High impact resistance
• Superior bond strength to steel and concrete
• Resistance to a broad range of chemicals
• Can be applied in a one-coat application up to 30 mils/.75 mm
• Easily repaired using inter-coat prep procedures

Features:

• Solvent free
• Excellent chemical resistance
• High abrasion resistance
• Short curing times
• 1-layer-system

Features:

• Versatile coating with wide chemical resistance
• Excellent abrasion resistance
• Excellent thermal shock resistance
• Excellent resistance to fuels
• Long history of performance
• Self-priming

Features:

• Versatile coating with wide chemical resistance
• Outstanding abrasion resistance
• Excellent thermal shock resistance
• Excellent resistance to fuels
• Long history of performance
• Self-priming

Features:

• Versatile coating with wide chemical resistance
• Excellent abrasion resistance
• Excellent thermal shock resistance
• Excellent resistance to fuels
• Long history of performance
• Self-priming

Features:

• Excellent overall chemical resistance to a wide range of acids, alkalies and solvents.
• Superior abrasion resistance and good flexibility
• Complies with FDA 21CFR 175.300 criteria for food contact

Features:

• Excellent overall chemical resistance to a wide range of acids, alkalies and solvents.
• Very good abrasion resistance and flexibility
• Complies with FDA 21CFR 175.300 criteria for food contact

Features:

• Excellent overall chemical resistance to a wide range of acids, alkalies and solvents.
• Smooth non-stick surface.
• Very good abrasion resistance and flexibility.
• Complies with FDA 21CFR 175.300 criteria for food contact.

Features:

• Easy-to-apply high performance thin film lining
• Protects I high temperature demineralized water immersion - 212°F (100°C)
• Recommended in high pressure three phase service up to 250°F (121°C)
• Can be air dried or force cured for prompt service

Features:

• Easy-to-apply high performance thin film lining
• Protects I high temperature demineralized water immersion - 212°F (100°C)
• Recommended in high pressure three phase service up to 250°F (121°C)
• Can be air dried or force cured for prompt service
• Outstanding abrasion resistance

Features:

• Excellent overall chemical resistance to a wide range of acids, alkalies and solvents
• Very good abrasion resistance and flexibility
• Complies with FDA 21 CFR 175.300 criteria for food contact

Features:

• Outstanding overall chemical resistance
• Dense, highly cross-linked film for superior barrier protection
• Superior immersion resistance
• Excellent abrasion resistance and toughness
• Well-suited for hydrocarbon exposures
• Formulated for use in a large variety of facilities including waste water, chemical and fuel storage, wet-gas pipelines, rail cars, barges and ship tanks
• Bis A free
• Cures down to 35°F (2°C)

Features:

• • Low ambient temperature cure system (-10°C to +10°C).
• • Excellent corrosion resistance to marine environments.
• • Excellent corrosion resistance to buried pipes and tanks.
• • Excellent resistance to cathodic disbondment.
• • Excellent resistance to electric insulation (12.000 Volts/mm).
• • May be applied in a single coat wet on wet at standard dry film thickness of 2.000 µm.
• • Superior wetting properties and excellent adhesion to steel.
• • Can be topcoated with CARBOTHANE® series for long term color and gloss
• retention.

Features:

• Fast curing rate increases throughput
• Superior wetting properties result in better edge retention and excellent adhesion to steel
• Mix ratio of 1:1 and user friendly application properties
• Unlimited build with single multi-pass coats
• Self priming (120 mil maximum for potable water)
• Meets AWWA C222
• UL approved for ANSI/NSF Std. 61 potable water

Features:

• Fast curing rate increases throughput
• Excellent abrasion resistance
• Superior wetting properties for outstanding adhesion
• Mix ratio 1:1 and user friendly application properties
• Can be topcoated with Carbothane series of products
• Unlimited build with single multi-pass coats
• Compliant with AWWA C222
• Compliant with EN 10290

Features:

• Rapid curing to increase through put
• Excellent abrasion resistance
• Superior wetting properties for outstanding adhesion
• Robust 1:1 mix ratio and user friendly application properties
• Can be topcoated by Carbothane aliphatic polyurethanes
• Unlimited build with single multi-pass coats
• Compliant with AWWA C222

Features:

• Fast curing increases throughput
• Excellent abrasion resistance
• Superior wetting properties for outstanding adhesion
• Mix ratio of 1:1 with easy application properties
• Can be topcoated with Carbothane series of products
• Unlimited film build with single or multi-pass coats

Features:

• Fast curing increases throughput
• Excellent abrasion resistance
• Superior wetting properties for outstanding adhesion
• Mix ratio 1:1 and user friendly application properties
• Can be topcoated by Carbothane series of products
• Unlimited build with single multi-pass coats
• Compliant with AWWA C222
• Compliant with EN 10290

Features:

• Low temperature cure
• Quick cure to handle
• Superior wetting properties and outstanding adhesion to steel
• Excellent edge retention
• Mix ratio of 1:1 and user friendly application properties
• Up to 80 mils build with a single application
• Can be topcoated with Carbothane series of products for long-term color and gloss retention

Features:

• Improves flow efficiency in gas pipes
• Excellent flow and leveling
• Single-coat application
• Hard, smooth, glossy finish
• Excellent abrasion resistance
• Meets all criteria of API RP 5L2
• Long pot life

Features:

• Improves flow efficiency in gas pipes
• Excellent flow and leveling
• Single-coat application
• Hard, smooth, glossy finish
• Excellent abrasion resistance
• Meets all criteria of API RP 5L2
• Corrosion prevention during storage

Features:

• Improves flow efficiency in gas pipes
• Meets API RP5L2 requirements for gas transmission pipeline flow liner
• Excellent flow and leveling
• Single-coat application
• Hard, smooth, glossy finish
• Excellent abrasion resistance
• Corrosion prevention during storage

Features:

• Quick dry to touch and QC times
• Color indicator confirms proper mixing
• Low temperature cure 40°F (4.4°C)
• Excellent cathodic protection performance
• Film build up to 50 mils DFT in one coat
• Excellent edge retention
• Superior adhesion to steel
• Excellent adhesion over prepared FBE, epoxy and polyurethane coated pipe
• Can be applied by spray, brush, roller or dual cartridge

Features:

• Quick dry to touch and QC times
• Good brush and roll properties
• Color indicator confirms proper mixing
• Low temperature cure 40°F (4.4°C)
• Excellent cathodic protection performance
• Film build up to 30 mils DFT in one coat
• Excellent edge retention
• Superior adhesion to steel
• Excellent adhesion over prepared FBE, epoxy and polyurethane coated pipe
• Can be hand applied by brush or roller

Features:

• Excellent gouge and abrasion resistance
• High crosslink density results in tough film
• Excellent adhesion to prepared FBE, Polyclad 975 and other coatings
• Protects FBE, and other base coats during directional drilling applications
• Zero VOCs, 100% solids
• Apply up to 125 mils (3.2 mm) in one application
• Rapid dry to handle, less than 20 minutes

Features:

• Full jet fire certification in accordance with ISO 22899
• Excellent hydrocarbon pool fire protection (ISO 834/BS-476)
• LR, DNV & ABS certification
• Successfully passed Norsok M-501 System 5A environmental test program without a topcoat
• Superior weathering resistance
• Very low moisture absorption
• Explosion resistance
• Extremely durable, impact resistant finish
• High film build properties
• Low flame spread and smoke development

Features:

• Over 40 years of proven performance
• Exceptional durability and toughness
• UL 1709 hydrocarbon fire rated up to 4 hours
• Jet fire rated up to 2 hours
• ASTM E119 cellulosic fire rated up to 4 hours
• Cryogenic protection against LNG spills and immersion exposures
• Resistant to 3 bar blast overpressure
• Hose stream resistant
• UL 2431 Category I-A Outdoor Heavy Industrial and Exterior Environmental Purpose
• Tolerant to wide range of climates
• Lightweight – one-fifth the weight of concrete for equal fire protection
• Ideal for onsite and offsite application
• Easy application by spray or trowel
• Nonflammable – during or after application
• Chloride and sulfide free – no special priming required
• Asbestos-free – complies with EPA and OSHA regulations
• Non-friable – high impact strength

Features:

• Heavy duty, ultra high density formulation
• Highest durability and toughness on the market
• UL 1709 hydrocarbon fire rated up to 4 hours
• ISO 22899-1 jet fire rated up to 2 hours
• ASTM E119 cellulosic fire rated up to 4 hours
• Cryogenic protection against LNG spills and immersion exposures
• Resistant to 3 bar blast overpressure
• Hose stream resistant
• Tolerant to wide range of climates
• Lightweight – one-fifth the weight of concrete for equal fire protection
• Ideal for onsite and offsite application
• Easy application by spray or trowel
• Nonflammable – during or after application
• Chloride and sulfide free – no special priming required
• Asbestos-free – complies with EPA and OSHA regulations
• Non-friable – high impact strength

Features:

• Cost effective, high yield
• Exceptional durability and toughness
• UL 1709 hydrocarbon fire rated up to 4 hours
• ISO 22899-1 jet fire rated up to 2 hours
• Cryogenic protection against LNG spills and immersion exposures
• Resistant to 3 bar blast overpressure
• Hose stream resistant
• Tolerant to wide range of climates
• Lightweight – one-fifth the weight of concrete for equal fire protection
• Ideal for onsite and offsite application
• Easy application by spray or trowel
• Nonflammable – during or after application
• Chloride and sulfide free – no special priming required
• Asbestos-free – complies with EPA and OSHA regulations
• Non-friable – high impact strength

Features:

• Cost effective fireproofing solution
• Outstanding coverage, high build
• Exceptional durability and toughness
• UL 1709 hydrocarbon fire rated up to 4 hours
• BS 476 hydrocarbon fire rated up to 4 hours
• ISO 22899-1 jet fire rated up to 2 hours
• ASTM E119 cellulosic fire rated up to 4 hours
• Cryogenic protection against LNG spills and immersion exposures
• Resistant to 3 bar blast overpressure
• Hose stream resistant
• Tolerant to wide range of climates
• Lightweight – one-fifth the weight of concrete for equal fire protection
• Easy application by spray or trowel
• Nonflammable – during or after application
• Chloride and sulfide free – no special priming required
• Asbestos-free – complies with EPA and OSHA regulations
• Non-friable – high impact strength

Features:

• Universal primer and tie-coat
• Excellent adhesion to SSPC-SP 2 prepared steel, galvanizing, aluminum, stainless steel and copper
• Low stress, highly flexible film
• Extremely high solids
• Low odor
• Contains corrosion inhibitors
• Compatible with a variety of topcoats
• User friendly brush and roller application
• VOC compliant to current AIM regulations

Features:

• Universal primer and tie-coat
• Cures down to 35°F (2°C)
• Excellent adhesion to SSPC-SP 2 prepared steel, galvanizing, aluminum, stainless steel and copper
• Low stress, highly flexible film
• Extremely high solids
• Low odor
• Contains corrosion inhibitors
• Compatible with a variety of topcoats
• User friendly brush and roller application
• VOC compliant to current AIM regulations

Features:

• • Universal primer and tie-coat.
• • Cures down to 2°C (36°F).
• • Excellent adhesion to SSPC-SP 2 prepared steel, galvanizing, aluminum, stainless steel.
• • Highly flexible film.
• • High solids.
• • Low odor.
• • Contains corrosion inhibitors.
• • Compatible with a variety of topcoats .
• • User friendly brush and roller application.

Features:

• Excellent primer/sealer for drywall
• Glue-like bond to almost any surface
• Outstanding tie-coat over existing coatings
• Single component, thin-film application
• Topcoat with virtually any generic coating
• Ready-to-apply as supplied
• Fast drying
• Low odor; low VOC
• Suitable for use in USDA inspected facilities

Features:

• Outstanding wetting properties
• Solvent-free
• Long working time
• Excellent adhesion
• Compatible with a variety of toppings

Features:

• Excellent resistance to chemical attack
• Excellent abrasion and impact resistance
• Exceptional thermal shock resistance
• Superior bonding properties
• High cohesive strength
• Low permeability
• Low odor

Features:

• Excellent resistance to chemical attack
• Excellent abrasion and impact resistance
• Exceptional thermal shock resistance
• Superior acid resistance
• Superior bonding qualities
• High cohesive strength
• Low permeability
• Low odor

Features:

• Excellent resistance to chemical attack
• Excellent abrasion and impact resistance
• Exceptional thermal shock resistance
• Superior adhesion to both steel or concrete
• High cohesive strength
• Low permeability
• Low odor

Features:

• Designed for underwater and other wet applications
• Can be applied up to 2" in thickness
• Self-priming on most surfaces and over most generic types of coatings
• Rapid cure characteristics
• VOC compliant to current AIM regulations

Features:

Features:

Features:

• Excellent “hot” application characteristics, may be applied over hot substrates up to 300°F (149°C) surface temperature
• Will air dry “tack free” at ambient but will remain soft until heat curing has been achieved
• Typically topcoated with a silicone or modified silicone finish

Features:

• Temperature resistance to 400°F(204°C)
• Very good flexibility
• Excellent overall chemical resistance
• Very good abrasion resistance
• Easily applied by spray
• Acceptable for use over stainless steel

Features:

• Inorganic; stable; inert polymer
• Outstanding durability
• Excellent corrosion protection (used over Carbozinc inorganic primers)
• High temperature resistance (800 °F [426 °C])
• VOC compliant
• Cures at ambient conditions (hard in 2 hours)
• Cures down to 40 °F (4 °C)
• Does not require heat cure for high-temp service
• Outstanding resistance to handling damage
• Single-package

Features:

• Temperature resistant up to 204ºC
• Very good flexibility
• Excellent overall chemical resistance
• Very good abrasion resistance
• Easily applied by spray
• Acceptable for use over stainless steels

Features:

• Temperature resistance up to 450 °F (232 °C)
• High-build single-coat capabilities
• Excellent resistance to thermal shock
• Superior abrasion and chemical resistance
• Glass flake reinforcement
• Ambient-temperature cure
• VOC compliant to current AIM regulations

Features:

• Versatile use from cryogenic to 400°F (204°C) exposures
• Very good flexibility
• Excellent overall chemical resistance
• Very good abrasion resistance
• Easily applied by spray
• Acceptable for use over stainless steels
• High solids, low VOC formula

Features:

• Resistant to thermal shock conditions from ambient temperature to 400ºC.
• May be applied directly to properly prepared steel. Application over inorganic zinc primers like Carbozinc 11 will provide superior performance by preventing rusting and rust streaking during a shutdown or when the equipment is exposed to moisture and/or salts at temperature less than 93ºC.
• Excellent weathering properties.

Features:

• • Resistant to thermal shock conditions from ambient temperature to 400°C.
• • May be applied directly to properly prepared steel.
• • Application over inorganic zinc primers CARBOZINC, like Carbozinc 11, will provide superior performance by preventing rusting and rust streaking during
• a shutdown or when the equipment is exposed to moisture and/or salts at temperature less than 93°C.
• • Excellent weathering properties.

Features:

• Resistant to severe thermal shock
• Provides outstanding long-term performance when applied over Carbozinc inorganic zinc primers
• Provides barrier protection prior to heat curing (full film physical properties occur after heat curing)

Features:

• Resistant to severe thermal shock
• Provides outstanding long-term performance when applied over Carbozinc inorganic zinc primers
• Air-dries to touch (full film formation properties occurs after heat curing)

Features:

• Resistant to severe thermal shock
• Provides outstanding long-term performance when applied over Carbozinc inorganic zinc primers
• Provides barrier protection prior to heat curing (full film physical properties occur after heat curing)
• VOC compliant

Features:

• Zinc rich formulation provides outstanding corrosion resistance
• Air dries to touch at ambient temperatures
• Is resistant to severe thermal shock
• Provides outstanding long-term performance and appearance when topcoated with Thermaline Silicone Finishes

Features:

• Temperature resistance up to 260°C (500°F) for black **
• Air-dried curing capabilities
• Single-coat application
• Excellent resistance to thermal shock
• Good weathering and color stability
• RTS colors available

Features:

• Temperature resistance up to 273°C (525°F)
• Air-dried curing capabilities
• Single-coat application
• Excellent resistance to thermal shock
• Good weathering and color stability

Features:

• Temperature resistance up to 525°F (273°C)
• Single-coat application
• Excellent resistance to thermal shock
• Good weathering
• VOC compliant

Features:

• Elevated temperature resistant.
• Very good flexibility.
• Easily applied by spray.
• Can be applied over steel and stainless steels.
• Qualified by EDF (Electricité de France) - FNP Register N° 1110.
• Can be applied over Carbozinc 11.

Features:

• Unique reinforced but flexible polymer film
• Versatile use from cryogenic to 650°C exposures
• Dries to handle without heat cure (See curing schedule)
• Outstanding barrier properties
• Protects steel from thermal wet cyclic conditions
• Suitable for both shop and field application
• Provides corrosion protection even with ambient temperature cure
• Self priming or apply over Carbozinc 11 primers when uninsulated
• Protects stainless steels from chlorides and stress corrosion cracking
• Very fast recoat times

Features:

• Flexible
• Hard, dust free surface
• Allows easy replacement of cables
• Water-based product, low odor
• Asbestos-Free – complies with EPA and OSHA regulations
• Does not de-rate cables
• Weathering – approved for exterior use
• Quality Manufactured – under strict Carboline quality standards
• Provides protection at 1/16” Dry Film Thickness

Features:

• Provides a flexible fire protection solution to structural steelwork, process vessels, divisions and electrical raceways for 1 through 4 hours.
• Lowest thickness per fire rating of any competitive epoxy intumescent coating.
• Inherently flexible and durable formulation designed to withstand abrasion, vibration, handling, transportation and erection stresses in any climate.
• Formulated to maintain it’s flexibility, elongation and fire resistive properties throughout its service life regardless of climate.
• Engineered to resist extreme and rapid temperature cycles without cracking or disbondment.

Features:

• Provides a flexible fire protection solution to structural steelwork, process vessels, divisions and electrical raceways for 1 through 4 hours.
• Lowest thickness per fire rating of any competitive epoxy intumescent coating.
• Inherently flexible and durable formulation designed to withstand abrasion, vibration, handling, transportation and erection stresses in any climate.
• Formulated to maintain it’s flexibility, elongation and fire resistive properties throughout its service life regardless of climate.
• Engineered to resist extreme and rapid temperature cycles without cracking or disbondment.
• Extensive outgas testing for controlled cleanroom and sterile environments.

Features:

Features:

Features:

Features:

Features:

Features:

Features:

Features:

Features:

Features:

Features:

Features:

Features:

Features:

Features:

Features:

Features:

Features:

Features:

Features:

Features:

Features:

Features:

Features:

Features:

Features: