PRODUCTS


Product Lines

Product Types

Product Applications

MARKETS

Clear All

Selected Filters


  • A/D Firefilm III

    Features:

    • UL/ULC, ITS and ICC-ES Listed – designs for many types of steel sections. Up to 3 hour fire ratings for both interior general purpose and interior conditioned space applications.
    • Decorative Finish – Gives a smooth, decorative finish. Compatible topcoats available in a wide range of colors.
    • Advanced fiber free formulation - dust free surface.
    • Durable finish – Provides a hard, impact and abrasion resistant surface.
    • Topcoat finishes smooth to slight orange peel.
    • Thin film coating – space saving smaller column footprints.
    • Low VOC content.
    • LEED compliant

    Description:

    A/D Firefilm III is a decorative, fiber free, thin film intumescent coating designed for the fire protection of steelwork for up to a 3 hour fire rating, depending on the design. The recommended use for this product is fireproofing of interior steel beams, columns, tubes, and pipes.


  • Armorlast I

    Features:

    • Ultra-long corrosion protection when applied over Carbozinc 11 Series inorganic zinc primers
    • Extremely fast throughput in fabrication shops
    • Can be applied over Carbozinc 11 or Carbozinc 11 HS after as little as two hours cure
    • Cures to handle quickly at ambient temperature
    • Outstanding weatherability
    • Isocyanate free
    • Meets Class B Slip Co-Efficient over approved primer
    • Exceeds ISO 12944-9 CX testing criteria as part of a two coat inorganic system

    Description:

    Armorlast I is a high solids, high build inorganic topcoat used to seal and protect inorganic zinc primers. The film exhibits exceptional toughness, high temperature resistance, and is available in a limited assortment of colors. Being inorganic, Armorlast I provides exceptional weatherability and long-term performance. When used as finish over a permanent zinc primer, the system becomes an ultra-long lasting corrosion resistant system.


  • Carboclean Cons 200

    Features:

    • Carboclean Cons 200 is used to remove oxides (rust), chalk, magnetite, humus, salt, concrete, shell, algae and other deposits. Well-suited for internal treatment of pipes and piping systems made of metals and plastic-/polyester products. Does not damage paints, plastics, metals, linings or packings.

    Description:

    The product is a biologically degradable liquid without any hazardous substances. It is approved as a HOCNF Class Yellow product, and can be disposed to drains/sewage systems without containment. Active ingredients are citric acid, phosphoric acid, inhibitor and water. It has a light red colour, sour smell and a pH value of 1,1 til 1,7 with density 1.14 g/cm³.


  • Carboclean Gel 100

    Features:

    • Carboclean Gel 100 is used to remove oxides (rust), chalk, magnetite, humus, salt, concrete, shell, algae and other deposits. Well-suited for treatment of ceilings, walls and other surfaces treatment of metals and plastic-/polyester products. The gel tixotropy gives the product time to work without sagging and drying out. Does not damage paints, plastics, metals, linings or packings.

    Description:

    The product is a biologically degradable liquid without any hazardous substances. It is approved as a HOCNF Class Yellow product, and can be disposed to drains/sewage systems without containment. Active ingredients are citric acid, phosphoric acid, inhibitor and water. It has a light red colour, sour smell and a pH value of 1,1 til 1,7 with density 1.23 g/cm³.


  • Carbocoat 111

    Features:

    • • Fast Dry Properties.
    • • Can be applied down to 4°C (39°F).

    Description:

    Carbocoat 111, quick drying, is a high quality industrial protective coating. It can be applied with conventional air or airless spray systems.


  • Carbocoat 115

    Features:

    • Rapid cure
    • VOC compliant for most areas
    • Good for filling properties on rough and pitted steel
    • Fast dry to handle properties

    Description:

    Fast drying steel primer that provides corrosion protection on structural steel. Well suited for fabrication shops that need fast cure to dry and handle times. May be topcoated with conventional alkyds or acrylics for color, aesthetics or additional protection.


  • Carbocoat 1310 Primer

    Features:

    Description:

    Carbocoat 1310 Primer is a multipurpose primer with excellent adhesion to steel, iron and cast iron. The primer is fast drying and can be used for most industrial services in normal corrosive environment. Recommended for OEM and maintenance applications.


  • Carbocoat 1342 Primer

    Features:

    Description:

    Rust preventing primer. Use with or without topcoat. Typically used as a primer above water line on areas like superstructure, topside, deck, stores room, cargo hold etc.


  • Carbocoat 1343 Finish

    Features:

    Description:

    Carbocoat 1343 Finish has good light- and weather resistance and is suitable for use both in- and outdoors.


  • Carbocoat 139

    Features:

    • One component product
    • Excellent flexibility
    • Good abrasion resistance
    • Can be applied by Airless- and conventional spray, roller and brush
    • Good color and UV resistance

    Description:

    Modified polyurethane industrial enamel for broad use on interior and exterior metal surface where a durable, easy-to apply, single pack coating is desired.


  • Carbocoat 1390 Finish

    Features:

    Description:

    Carbocoat 1390 Finish is a high gloss, fast drying topcoat with good weathering properties for use in mild corrosive environment.


  • Carbocoat 1421 Primer

    Features:

    • One component product
    • Rapid cure
    • Lead and chromate free
    • Contains non-toxic zinc phosphate as a corrosion inhibitor
    • Can be applied by Airless- and conventional spray, roller and brush
    • Ideal for the architectural market
    • Approved as a primer under certain Carboline fireproofing materials

    Description:

    Fast drying steel primer that provides corrosion protection on structural steel. Well suited for fabrication shops that need fast cure to dry and handle times. May be overcoated with conventional alkyds or acrylics for color, aesthetics or additional protection.


  • Carbocoat 1422 Topcoat

    Features:

    • One component product
    • Medium cure speed
    • Lead and chromate free
    • Can be applied by Airless- and conventional spray, roller and brush

    Description:

    Single component, high gloss alkyd topcoat. Tinted to most RAL & BS shades. Good for architectural & infrastructure.


  • Carbocoat 150 Universal Primer

    Features:

    • Corrosion resistant coating with zinc phosphate corrosion inhibitor
    • Good for extended exposure demands
    • Heavy-metal free
    • VOC compliant for most areas
    • Accepts wide range of topcoats

    Description:

    Heavy-duty primer formulated to provide long term protection of structural steel. It provides excellent adhesion and can be welded through to yield sound welds.


  • Carbocoat AQ 3327

    Features:

    • Carbocoat AQ 3327 Primer is used as a primer for cast iron and other steel applications.

    Description:

    Carbocoat AQ 3327 has very good adhesion to most surfaces. The product dries quickly and has good flexibility and abrasion resistance.


  • Carbocoat HT Finish

    Features:

    • Carbocoat HT Finish is designed for use in various industrial service. A versatile finish coat for OEM products, agricultural equipment, pumps
    • etc..

    Description:

    Carbocoat HT Finish is an air-drying single package topcoat for use on iron, steel and cast iron substrates. Good light- and weathering resistance. Suitable for both indoors and outdoors use.


  • Carbocoat HT Primer

    Features:

    • Carbocoat HT Primer can be used for all industrial service in normal corrosive
    • environment. Recommended for OEM and maintenance applications.

    Description:

    Carbocoat HT Primer is a multipurpose primer with excellent adhesion to steel, iron and cast iron. The primer is fast drying.


  • Carbocrylic 1290

    Features:

    • Used where a high standard of corrosion protection is required.
    • Excellent for use in chemical industry, offshore, power and other heavy industry.

    Description:

    Carbocrylic 1290 is a topcoat with excellent weathering performance. Gives a glossy, smooth and hard surface that is easily cleanable.


  • Carbocrylic 1290 ATEX

    Features:

    • • Excellent weatherability.
    • • In accordance with CEI EN 60079.

    Description:

    Carbocrylic 1290 ATEX is a topcoat with antistatic and dissipative agens according to CEI EN 60079 (Electric costruction in explosives gas atmospheres).


  • Carbocrylic 1294 HS

    Features:

    • Suitable as a final coat for many coating systems, or as a refresher coat over existing protection to upgrade weathering protection and colour retention of chalked and faded coatings. An ideal colour coat for railing, colours coded
    • pipes, decorative trim, safety equipment, etc. Recommended for superstructures, decks, topsides etc.

    Description:

    A semi-glossy, attractive, maintenance topcoat having good weathering resistance and colour retention. The smooth, slick film minimises dirt pick-up. Easily applied by spray and has rapid drying characteristics. Exhibits excellent adhesion to properly prepared aged epoxies. It can be used direct to metal and applied at sub zero surface temperatures.


  • Carbocrylic 1295 HS

    Features:

    • Isocyanate free
    • Offers excellent corrosion and weathering protection.
    • NORSOK Approved for offshore
    • Recommended for chemical industry, offshore, power and heavy industry.

    Description:

    Carbocrylic 1295 HS is a high solids topcoat with good weathering capabilities. Offers a glossy, smooth, hard finish that is easy cleanable. One coat application capable.


  • Carbocrylic 3325 Primer

    Features:

    • Carbocrylic 3325 Primer is used as a primer for cast iron and steel constructions.

    Description:

    Carbocrylic 3325 Primer has very good adhesion to most substrates. The primer is very fast drying and has good elasticity and abrasion resistance.


  • Carbocrylic 3333 PMP

    Features:

    • Peelable Masking Protection for short term protection against contaminants or overspray
    • Environmentally friendly waterborne formulation
    • Low VOC
    • Low odor
    • Provides shielding from light mechanical wear
    • Good weld spatter resistance at higher thicknesses

    Description:

    A single component, water-based temporary coating that is spray applied over a wide range of substrates, ferrous, non-ferrous or previously painted, to form a non-tacky protective layer. It provides excellent short term protection against contaminants as a holding primer or from overspray of other coating including fireproofing products.


  • Carbocrylic 3358

    Features:

    • Single component
    • Resistant to flash rusting
    • Outstanding corrosion protection
    • Low odor, low VOC

    Description:

    Surface tolerant direct-to-metal primer with excellent corrosion resistant properties, resistance to flash rusting and suitability for SPPC-SP2 and SP3-cleaned steel.


  • Carbocrylic 3358 IMC

    Features:

    • Single component
    • Fast drying
    • Low VOC

    Description:

    Carbocrylic 3358 IMC is normally used as an intermediate coat in a three coat system. Can be topcoated with several generic types of topcoats. Excellent abrasion resistance and flexibility with good chemical resistance. Provides very good corrosion protection with a suitable primer. May be used as a primer in mild corrosive exposure.


  • Carbocrylic 3359

    Features:

    • Multi-purpose interior/exterior coating
    • Excellent color and gloss retention
    • Single component
    • Outstanding corrosion protection
    • Low odor, low VOC
    • Acceptable for use in USDA facilities

    Description:

    Versatile high performance finish with excellent corrosion resistance and exterior weathering properties.


  • Carbocrylic 3359 DTM

    Features:

    • Smooth, attractive, high build finish
    • Excellent weatherability, gloss and color retention
    • Low odor
    • Excellent corrosion protection
    • Meets most VOC (Volatile Organic Content) regulations
    • Excellent resistance to flash rusting
    • Outstanding application characteristics
    • Dry-fall* properties
    • Suitable for use in USDA inspected facilities

    Description:

    A single-component durable, high performance direct-to-metal acrylic coating for use where excellent weathering properties and chemical resistance are required. Use as a direct-to-metal acrylic coating for tank exteriors, piping, and structural steel, as well as other exterior and interior uses. May also be used as a finish coat over recommended primers.


  • Carbocrylic 3359 TC

    Features:

    • Single component
    • Fast drying
    • Low VOC

    Description:

    Carbocrylic 3359 TC is a topcoat in a two- or three coat system. Excellent film properties, high gloss and good weatherability. Provides very good corrosion protection with a suitable primer system.


  • Carboglas 1590

    Features:

    • Excellent abrasion and impact resistance
    • Economical, high solids coating system
    • Especially suited for helidecks, hull exteriors,
    • splash zones of offshore structures, industrial floors and other areas exposed to high abrasion and impact such as underwater hulls of ships operating in icy waters

    Description:

    Carboglas 1590 system provides excellent resistance to numerous petroleum products and other liquids. Cures to a tough, abrasion resistant film. 250 microns Carboglas 1590 contain 60 layers of glassflake, making the film very resistant to penetration in aggressive environments.


  • Carboglas 1601 SG

    Features:

    • Outstanding marine exposure resistance (atmospheric, tidal, subsea)
    • Excellent resistance to both organic and mineral acids
    • Excellent abrasion and impact resistance
    • Excellent resistance to bleach solutions and free chlorine
    • Outstanding long-term protection

    Description:

    This extremely durable and chemically resistant cladding utilizes a multi-step curing process that incorporates chemically-fused glass flake reinforcing in a highly cross-linked polyester matrix. The resultant layer is an extremely durable barrier against a variety of exposures including marine, fresh water, salt water, both mineral and organic acids, bleach solutions, and free chlorine. The multi-layer glass-flake reinforcement greatly impedes the penetration of water and other corrosives making this system extremely long performing.


  • Carboglas 1601 SZ

    Features:

    • Ideal for long-term protection in marine exposure above and below water, including splash zones.
    • Used as a tank lining and for areas exposed to many acids, hypochlorites and free chlorine.
    • Recommended for protection of steel on areas exposed to extreme abrasion, - contact Carboline for specific recommendations.

    Description:

    Carboglas 1601 SZ is an extremely abrasion and chemical resistant polyester coating. Multiple layers of glass flakes are incorporated in a highly cross-linked polyester matrix. The resultant tight film makes this coating extremely long performing.


  • Carboguard 101

    Features:

    • Very high solids("Solvent less") self - priming coating
    • Excellent corrosion resistance to marine/chemical environments
    • Excellent corrosion resistance to sea and fresh water immersion
    • Excellent corrosion resistance to buried pipes and tanks
    • Excellent resistance to mechanical and abrasion damage
    • Excellent resistance to cathodic disbondment
    • Excellent resistance to electric insulation (12000 volts/mm)

    Description:

    Carboguard 101, is a very high solids self-priming coating. Excellent corrosion resistance product to marine/chemical environments. Used for the corrosion protection of buried tanks and pipes.


  • Carboguard 102

    Features:

    • Very high solids "Solvent-less", self-priming coating
    • Excellent corrosion resistance to marine/chemical environments
    • Excellent corrosion resistance to buried pipes and tanks
    • Excellent resistance to mechanical and abrasion damage
    • Excellent resistance to cathodic disbondment
    • Excellent resistance to electric insulation (12000 volts/mm)

    Description:

    Carboguard 102 (ex Apsacoat 102), is a very high solids self-priming coating. Excellent corrosion resistance product to marine/chemicals environments. Used for the corrosion protection of buried tanks and pipes.


  • Carboguard 104

    Features:

    • Excellent corrosion resistance to marine/chemical environments
    • Excellent corrosion resistance to sea and fresh water immersion
    • Excellent corrosion resistance to buried pipes and tanks
    • Excellent resistance to mechanical and abrasion damage
    • Excellent resistance to cathodic disbondment
    • Excellent resistance to electric insulation (12000 volts/mm)

    Description:

    Carboguard 104 is solvent free and it is a very high solids self priming coating. Applied only by brush.


  • Carboguard 1207

    Features:

    • Superior abrasion resistance
    • Excellent resistance to aerated seawater and various other chemicals
    • Excellent immersion performance
    • Easy to repair
    • VOC compliant to current AIM regulations

    Description:

    Ultra-durable solvent-free coating for use on steel and concrete substrates subject to severe impact and physical abuse. This aggregate filled coating offers exceptional abrasion resistance in heavy-duty marine and splash zone environments. It is ideal for high abuse areas on offshore structures exposed to aerated sea water (splash zone), boat landing areas, or working decks, lay down areas, helidecks, or walkways. It can be also be used for buried pipe due to its outstanding physical durability. Consult Carboline Tech Service for high profile non-skid applications.


  • Carboguard 1209

    Features:

    • Excellent abrasion resistance
    • Excellent chemical resistance
    • Outstanding impermeability
    • Single coat, self-priming capabilities
    • VOC compliant to current AIM regulations
    • Non-skid surface (optional)

    Description:

    Dense, highly impermeable glass flake-filled coating used for protecting steel and concrete. This versatile coating provides an impenetrable film for severe exposures in marine, offshore, petrochemical, pulp and paper and other aggressive environments. Optional use of light or course grit fillers provides nonskid properties.


  • Carboguard 1212 GF

    Features:

    • Excellent abrasion resistance
    • Excellent corrosion resistance
    • Can also be used in water immersion and splash zone areas
    • NORSOK system 7A and 7B pre-qualified

    Description:

    Fast curing, highly impermeable glass flake filled coating used for protecting steel. This versatile coating provides an impenetrable film for severe exposures in marine, offshore, petrochemical, and other aggressive environments. Cures in low temperatures.


  • Carboguard 1340

    Features:

    • Exceptional wetting characteristics
    • Low stress, highly flexible film
    • Very high solids
    • Low odor
    • User-friendly brush & roller application
    • VOC compliant to current AIM regulations

    Description:

    Penetrating primer/sealer for use on concrete substrates and Carboline Pyrocrete Fireproofing products. It performs extremely well in sealing cementitious surfaces and is designed to receive a variety of different generic types of finish coats. Some recommended uses of 1340 include the use as a curing compound or form release agent. When applied to “green” concrete it will retard the escape of moisture during the cure period. It is also excellent for use as a form release coating on plywood or steel forms.


  • Carboguard 1341 Clear

    Features:

    • Excellent penetrating and adhesion properties
    • Used over concrete and cementicious fire protection materials to secure proper
    • topcoat adhesion

    Description:

    Carboguard 1341 Clear is a fast drying, clear penetrating primer/sealer for use on concrete substrates before topcoating.


  • Carboguard 193P

    Features:

    • • Excellent corrosion resistance.
    • • Cured film is tough and abrasion resistant.
    • • Can be used as tie-coat over inorganic zinc silicate and metallized steel.
    • • Widely used within petrochemical, off-shore and naval industries.

    Description:

    Epoxy-polyamide primer with zinc phosphate.


  • Carboguard 60

    Features:

    • Low odor and low VOC
    • Available in a variety of colors
    • Attractive medium sheen for tank exteriors
    • Good chemical resistance
    • Used as a primer, intermediate, or finish coat
    • Fast cure & dry times
    • Can be applied over power tool cleaned surfaces
    • VOC compliant to current AIM regulations
    • Good abrasion resistance

    Description:

    Carboguard 60 is a high solids, versatile, abrasion resistant, chemical resistant, and corrosion resistant coating. It can be used as a primer, intermediate coat, or self-priming finish over steel or inorganic zinc primers. May be topcoated with itself, or a broad variety of high performance finish coats. This product has excellent wetting properties giving it the capability of going over marginally prepared substrates. It is ideal for maintenance and fabrication shop applications. An optional Glass Flake (GF) additive or micaceous iron oxide (MiO) additive can be purchased separately and may be used to enhance film strength for more abusive applications for severe marine or heavy industrial uses. Consult Technical Service for suitability as a lining or other exposures.


  • Carboguard 609

    Features:

    • • Low temperature cure.
    • • Excellent corrosion protection.
    • • Excellent application characteristics.
    • • Fast recoat time.
    • • Moisture tolerance during application.
    • • Extended recoat window for atmospheric exposure (6 months for most part of
    • topoats).

    Description:

    An epoxy that has a variety of attributes including low-temperature cure, fast recoat time, moisture tolerance during application.


  • Carboguard 632 Sealer

    Features:

    • Widely used within offshore- and shipping industries on top of metallized surfaces and zinc silicate where excellent corrosion resistance is expected.

    Description:

    Carboguard 632 Sealer is a tie-coat specially designed for application on top of metalized steel and inorganic zinc silicate. To be used to avoid pore development in successive coat.


  • Carboguard 633

    Features:

    • Fast overcoatable with 2K topcoats
    • Excellent anti-corrosive properties
    • Applicable as one-coat system up to corrosion class C4 (ISO 12944-2)
    • Applicable up to corrosion class C5(H) with suitable primer
    • Excellent flowability, also at low DFT
    • Very good abrasion resistance.

    Description:

    Carboguard 633 is a heavy duty, high build primer or intermediate coating for protection of steel in corrosive environments. Can be used on aluminum and galvanization. Low temperature curing and fast overcoatable.


  • Carboguard 635

    Features:

    • Low temperature cure (20°F)
    • Excellent corrosion protection
    • Excellent application characteristics
    • Fast recoat times
    • Moisture tolerance during application
    • Continues to cure underwater
    • Extended recoat window for atmospheric exposures (6 months for most topcoats)
    • Meets IMO Performance Standard for Protective Coatings MSC.215(82): 2006 for sea water ballast tanks

    Description:

    An all-purpose immersion-grade epoxy that has a variety of attributes including low-temperature cure, surface tolerance, fast recoat times, moisture tolerance during application and cure, and excellent corrosion protection. Can be used direct to metal as a corrosion resistant primer, an intermediate coating over itself and many other primers, and can be used as a finish coat. Suitable for both maintenance and new construction projects due to its excellent surface wetting characteristics and quick cure for handling. May also be used for immersion in fresh or salt water (marine) exposures. Meets IMO performance for ballast tanks for marine vessels.


  • Carboguard 635 VOC

    Features:

    • Low temperature cure (20°F)
    • Excellent corrosion protection
    • Excellent application characteristics
    • Fast recoat times
    • Moisture tolerance during application
    • Continues to cure underwater
    • Extended recoat window for atmospheric exposures (6 months for most topcoats)
    • Low VOC and low HAPs content
    • Certified by UL to meet the drinking water criteria of NSF/ANSI/CAN 600
    • Meets IMO Performance Standard for Protective Coatings MSC.215(82): 2006 for sea water ballast tanks

    Description:

    An all-purpose immersion-grade epoxy that has a variety of attributes including low-temperature cure, surface tolerance, fast recoat times, moisture tolerance during application and cure, and excellent corrosion protection. It has low VOC and low HAP's content for use in areas with restricted volatile emissions. Can be used direct to metal as a corrosion resistant primer or as an intermediate coating over other primers. Suitable for both maintenance and new construction projects due to its excellent surface wetting characteristics and quick cure for handling. May also be used for immersion in potable water, fresh or salt water (marine) exposures.


  • Carboguard 690

    Features:

    • High solids, low VOC
    • High build (16 mils)
    • Low temperature cure (20°F)
    • Excellent moisture tolerance during application
    • Continues to cure underwater
    • Fast cure response
    • Suitable for use in USDA inspected facilities

    Description:

    High performance, surface tolerant epoxy that has excellent resistance to water and wastewater exposures. This coating exhibits outstanding moisture tolerance during application, low temperature cure capability, and very fast cure response for quick return to service. Can be used on structural steel, piping, tankage, and equipment exposed to industrial or marine environments. It can also be used in immersion service for salt water, process water (non-potable) and waste water treatment projects; and is ideal for coatings under insulation up to 300°F (149°C).


  • Carboguard 690 GF

    Features:

    • High solids, low VOC
    • High build (20+ mils)
    • Low temperature cure (20°F)
    • Excellent moisture tolerance during application
    • Continues to cure underwater
    • Fast cure response
    • Excellent physical and barrier properties

    Description:

    High performance, glass-flake filled, cold cure epoxy having excellent film strength and resistance to water, salt water and wastewater exposures. This coating exhibits outstanding moisture tolerance during application, low temperature cure capability, and very fast cure response for quick return to service. Glass flake reinforcement enhances film strength, impact resistance and barrier properties. Can be used on a variety of surfaces including structural steel, piping, pilings, ships, offshore structures and other equipment exposed to industrial or marine environments. It can also be used in immersion service for salt water, process water (non-potable) and waste water treatment projects.


  • Carboguard 819

    Features:

    • Good corrosion resistance
    • Meets requirements for category C5M in accordance to ISO 12944-2
    • Cured film is tough and abrasion resistant
    • Widely used within commercial infrastructure
    • Can be applied over power tool cleaned surfaces
    • Can be used under certain Carboline fireproofing materials

    Description:

    A two-component, high build, anti-corrosive epoxy primer which is especially suitable for application over blast-cleaned steel. Carboguard 819 has robust application characteristics and good anti-corrosive properties over ferrous substrates properties, make it ideal for wide industrial uses. It can be recoated with most polyurethane and acrylic topcoats. As part of a system it meets the requirements for category C5M in accordance to ISO 12944-2 (shot-blasted steel Sa2.5).


  • Carboguard 878

    Features:

    • Excellent film build and edge protection
    • Surface tolerant characteristics
    • Cures at low temperature
    • Self-priming and primer/finish capabilities
    • Meets NORSOK System 7B, Rev. 6 requirement for submerged steel and NORSOK System 7C to 90°C

    Description:

    High solids, high-build epoxy mastic coating used for atmospheric exposed and submerged steel. Self-priming and normally specified in a two coat system.


  • Carboguard 885

    Features:

    • Ready to apply after mixing; no sweat-in time or thinning required
    • Economical fit for use epoxy
    • Available in a variety of rapid tint colors
    • Attractive low sheen for tank exteriors
    • Used as a primer, intermediate, or finish coat
    • Power tool cleaned surfaces acceptable
    • Optional low temperature (LT) cure Part B
    • VOC compliant to current AIM regulations

    Description:

    Versatile corrosion resistant coating. Used either as a primer, intermediate coat, or self-priming finish over steel or zinc primers. May be topcoated with itself, or a broad variety of high performance finish coats. Has surface tolerant properties. It has versatile uses in the marine and offshore industries for both above and below the waterline. Carboguard 885 LT has 35°F cure capability (see seperate data sheet).


  • Carboguard 885 MIOX

    Features:

    • • Ready to apply after mixing; normally thinning is not required.
    • • Economical fit for use epoxy.
    • • MIO contents on dry film thickness: 10%.
    • • Used as a primer, intermediate or finish coat.
    • • Power tool cleaned surfaces acceptable.

    Description:

    Versatile corrosion resistant coating. User either as a primer, intermediate coat or selfpriming finish or zinc primers. May be top coated with himself, or a broad variety of high performance finish coats. Has surface tolerant properties.


  • Carboguard 890

    Features:

    • Excellent chemical resistance
    • Surface tolerant characteristics
    • Conventional and low-temperature versions
    • Self-priming and primer/finish capabilities
    • Very good abrasion resistance
    • VOC compliant to current AIM regulations
    • Suitable for use in USDA inspected facilities
    • Intermediate coat for AWWA D102 Outside System #6 and #7
    • Approved MPI #98

    Description:

    Highly chemical resistant epoxy mastic coating with exceptionally versatile uses in all industrial markets. Self-priming and suitable for application over most existing coatings, and tightly adherent rust. Serves as stand-alone system for a variety of chemical environments and is also designed for various immersion conditions. An optional micaceous iron oxide additive (MIO Filler) can be purchased separately and may be used per the Product Data Sheet to enhance corrosion protection and film strength for more aggressive service such as severe marine or heavy industrial uses.


  • Carboguard 890 GF

    Features:

    • Excellent chemical resistance
    • Surface tolerant characteristics for less severe applications
    • Low-temperature version: 890 LT GF
    • Self-priming and primer/finish capabilities
    • Excellent abrasion resistance & hardness
    • VOC compliant to current AIM regulations
    • Non-skid service with optional fillers

    Description:

    A glass reinforced chemically resistant epoxy coating with wide versatility in all industrial markets. It is self-priming. Glass reinforcement improves internal film strength, hardness, impact, and abrasion resistance. It is often used in severe service (above or below the water line) in marine applications where these resistance qualities are desired.


  • Carboguard 890 LT

    Features:

    • Excellent chemical resistance
    • Surface tolerant characteristics
    • Low-temperature cure formulation
    • Self-priming capability
    • Very good abrasion resistance
    • VOC compliant to current AIM regulations
    • Suitable for use in USDA inspected facilities

    Description:

    Highly chemical resistant epoxy mastic coating with exceptionally versatile uses in all industrial markets. Self-priming and suitable for application over most existing coatings, and tightly adherent to rust. Excellent for use as a primer or intermediate coat where low temperature cure is needed. Can be used in a variety of chemical environments. May be used as a self-priming or finish coat on exterior exposure if discoloration can be tolerated.


  • Carboguard 890N

    Features:

    • Can be applied direct to steel without a primer
    • Single coat, high build capabilities
    • Can be applied to minimally prepared surfaces
    • Compatible to many existing, aged epoxies and inorganic zinc coatings
    • Easily decontaminated
    • DBA tested and qualified for Nuclear Service Level 1
    • Resistant to high levels of radiation
    • High solids and low VOC help reduce effects on charcoal filters
    • Application-friendly characteristics minimize manrem exposure
    • Suitable for use under insulation on hot surfaces operating up to 300°F (149°C) outside level 1 areas.

    Description:

    Nuclear grade, DBA tested, self priming epoxy. Tested and certified for use in Nuclear Level 1 areas in a variety of systems.


  • Carboguard 891

    Features:

    • Excellent film build and edge protection
    • VOC compliant to current AIM regulations
    • Complies with EU 1935/2004 criteria for food contact.

    Description:

    High solids, high-build coating widely used for lining interior steel and concrete tanks, valves and pipe. Formulated for application at conventional builds (100 - 250 microns per coat) as well as high builds (250 microns per coat).


  • Carboguard 891 VOC

    Features:

    • Meets the FDA requirements for 21CFR 175.300 for direct food contact
    • Meets the requirements of AWWA C210
    • Ultra High solids; Low VOC and HAPs
    • Handles deionized water up to 150°F (66°C)
    • Ultra low VOC (67 g/l)
    • Good chemical resistance
    • Excellent thermal shock resistance
    • Good abrasion resistance

    Description:

    Ultra high solids epoxy that is designed as a liner for water, demineralized water, wastewater and many other services. It is widely used as a tank lining for steel and concrete tanks. Product is self-priming and is normally applied in two coats. Formulated for application at conventional builds (4 to 6 mils per coat) as well as high builds (10 mils per coat).


  • Carboguard 893

    Features:

    • Excellent corrosion protection
    • Excellent film build and edge protection
    • Used as a primer or an intermediate coating
    • Good abrasion resistance
    • Cures down to 40°F (4°C)
    • VOC compliant to current AIM regulations

    Description:

    High solids corrosion resistant primer and intermediate. Used either as a primer or an intermediate coat over steel and inorganic zinc primers. Can be topcoated with a broad variety of high performance finish coats.


  • Carboguard 893 SG

    Features:

    • Ready to apply after mixing; no sweat-in time or thinning required.
    • Economical fit for use epoxy
    • Available in a variety of rapid tint colors
    • Attractive low sheen for tank exteriors
    • Used as a primer, intermediate, or finish coat
    • Power tool cleaned surfaces acceptable
    • Optional low temperature (LT) cure Part B
    • VOC compliant to current AIM regulations

    Description:

    Versatile corrosion resistant coating. Used either as a primer, intermediate coat, or self-priming finish over steel and zinc primers. Carboline glass flake additive may be added to improve performance including internal strength, hardness, impact, and abrasion resistance. May be topcoated with itself, or a broad variety of high performance finish coats. Product also has surface tolerant properties. Use optional (LT) cure for low temperature cure down to 35°F (1.7°C).


  • Carboguard 893 SG LT

    Features:

    • Ready to apply after mixing; no sweat-in time or thinning required.
    • Economical fit for use epoxy
    • Available in a variety of rapid tint colors
    • Attractive low sheen for tank exteriors
    • Used as a primer, intermediate, or finish coat
    • Power tool cleaned surfaces acceptable
    • VOC compliant to current AIM regulations

    Description:

    Versatile corrosion resistant coating. Used either as a primer, intermediate coat, or self-priming finish over steel and zinc primers. May be topcoated with itself, or a broad variety of high performance finish coats. Product also has surface tolerant properties and low temperature 35 °F (2 °C) cure capability.


  • Carboguard 893 SG MIO

    Features:

    • Ready to apply after mixing; no sweat-in time or thinning required.
    • Economical fit for use epoxy
    • Used as a primer or intermediate coat
    • Can be applied over power tool cleaned surfaces
    • Micaceous iron oxide (MiO Filler) for additional barrier properties and corrosion resistance: MiO is purchased separately
    • Optional low temperature (LT) cure Part B
    • VOC compliant to current AIM regulations

    Description:

    Versatile corrosion resistant coating with zinc phosphate corrosion inhibitor. Contains additional filler reinforcement (micaceous iron oxide) for enhanced barrier resistant properties. Used either as a primer or intermediate coat over steel, other epoxies or inorganic zinc primers. May be topcoated with a broad variety of high performance finish coats. Has surface tolerant properties. Has optional (LT) cure for 35°F cure capability.


  • Carboguard 904

    Features:

    • Exterior coating for railcars applied in one coat by plural component equipment.

    Description:

    Carboguard 904 is a two component, amine cured epoxy formulated for use as a direct-to-metal (DTM) exterior coating with excellent corrosion and chemical resistance.


  • Carboguard AQP

    Features:

    • Good abrasion resistance
    • Free of solvents
    • Low water absorption – no swelling
    • Chemical resistant to industrial and sea atmosphere, sweet, brackish and salt water, neutral salts, mineral and heating oils, fatty oils, chlorine free detergents, etc.
    • Normally used as 1 coat system

    Description:

    Carboguard AQP is a cost-effective abrasion resistant coating with basis of epoxy resin. Corrosion protection system of steel surfaces above and under water. Carboguard AQP is available in NC version (normal cure) and FC version (fast cure), where the NC version is specially applicable for touch-up and stripe coating. Carboguard AQP is well suited for potable water tanks and on concrete surfaces.


  • Carboguard E 19 LT

    Features:

    • Excellent corrosion resistance
    • Fast drying at low temperatures
    • Cured film is tough and abrasion resistant
    • Used 40% diluted as a tie-coat over zinc silicate and metallized steel
    • Excellent adhesion to aluminium
    • Widely used within petrochemical-, offshore and shipping industries

    Description:

    Carboguard E 19 LT Primer is a versatile epoxy primer with excellent resistance to salts, water and alkalies. Very good resistance to mild acids and solvents.


  • Carboguard E 19 Primer

    Features:

    • Excellent corrosion resistance
    • Cured film is tough and abrasion resistant
    • Used 40% diluted as a tie-coat over zinc silicate and metallized steel
    • Excellent adhesion to aluminium
    • Widely used within petrochemical-, offshore and shipping industries

    Description:

    Carboguard E 19 Primer is a versatile epoxy primer with excellent resistance to salts, water and alkalies. Very good resistance to mild acids and solvents.


  • Carboguard E19 Sealer

    Features:

    • Widely used within offshore- and shipping industries on top of metallized surfaces and zinc silicate where excellent corrosion resistance is expected.

    Description:

    Carboguard E19 Sealer is a tie-coat specially designed for application on top of metalized steel and inorganic zinc silicate. To be used to avoid pore development in successive coat.


  • Carboguard SC Primer

    Features:

    • Versatile general purpose epoxy primer
    • Excellent for use as a "holding primer"
    • Good resistance to salts, water and alkalis
    • Can be used as a "tie-coat" over zinc silicate, metallized steel and aluminium
    • Widely used within the petrochemical, offshore and shipping industries
    • Very good abrasion resistance

    Description:

    Carboguard SC Primer is an excellent general purpose corrosion primer with good resistance to salts, water and alkalies. Also resistant to splash and spillage from mild acids and solvents. The cured film is tough and abrasion resistant.


  • Carboguard SC Primer LT

    Features:

    • Versatile general purpose epoxy primer
    • Excellent for use as a "holding primer"
    • Good resistance to salts, water and alkalis
    • Can be used as a "tie-coat" over zinc silicate, metallized steel and aluminium
    • Widely used within the petrochemical, offshore and shipping industries
    • Very good abrasion resistance

    Description:

    Carboguard SC Primer LT is an excellent general purpose low-temperature corrosion primer with good resistance to salts, water and alkalies. Also resistant to splash and spillage from mild acids and solvents. The cured film is tough and abrasion resistant.


  • Carbo-Kit Carbocrylic 1295 HS

    Features:

    • Offers excellent corrosion and weathering protection.
    • NORSOK Approved for offshore
    • Recommended for chemical industry, offshore, power and heavy industry.

    Description:

    Carbo-Kit Carbocrylic 1295 HS is a high solid topcoat with good weathering capabilities. Offers a glossy, smooth, hard finish that is easy cleanable. Carbo-Kit Carbocrylic 1295 HS is specially designed for application with brush and roller.


  • CARBO-KIT Carbomastic 18 FC

    Features:

    • Designed for brush and roller application for touch up and maintenance
    • Can be applied as primer, mid coat and top coat or as single coat system
    • Can be applied in areas where ideal surface preparation is unachievable
    • Excellent immersion performance in both fresh and sea water.
    • Suitable as a rust preventing coating in ballast tanks.
    • Ideal for subsea installations, jackets and other areas prone to condensation
    • Very good abrasion resistance

    Description:

    Carbo-Kit Carbomastic 18 FC is a heavy duty, high build coating for protection of steel in corrosive environments. It is specially designed for application with brush and roller. Carbo-Kit Carbomastic 18 FC is excellent for use at low temperatures and at maintenance.


  • CARBO-KIT Carbomastic 652

    Features:

    • Designed for brush and roller application for touch up and maintenance
    • Excellent anti-corrosive properties
    • Self-priming capability
    • Fast recoat time
    • Excellent leveling with good corrosion protection, also at low DFT
    • Very good abrasion resistance
    • NORSOK System 1 and 7B pre-qualified
    • Excellent for atmospheric and submerged corrosion protection

    Description:

    Carbo-Kit Carbomastic 652 is a heavy duty, high build coating for protection of steel in corrosive environments. It is specially designed for application with brush and roller. Carbo-Kit Carbomastic 652 is excellent for use at low temperatures and at maintenance.


  • CARBO-KIT Carbothane 133 HG

    Features:

    • Carbo-Kit Carbothane 133 HG is designed for brush and roller application for maintenance and is used when there are high requirements for corrosion protection. Extremely suitable for use in chemical industry, offshore, hydropower and other heavy industry.

    Description:

    Carbo-Kit Carbohatne 133 HG is a high build, glossy finish that has outstanding weathering resistance and colour retention. Suitable for application over a number of Carboline primers and intermediates, this material provides excellent corrosion resistance in a broad range of colours.


  • CARBO-KIT Carboxane 2000 Topcoat

    Features:

    • Designed for brush and roller application for touch up and maintenance
    • High gloss surface
    • Often used where polyurethane coatings are not desired.
    • Excellent for use in chemical industry, offshore, ships, bridges, hydropower and other heavy industry.

    Description:

    Carbo-Kit Carboxane 2000 Topcoat is a topcoat with excellent weathering properties. The product is specially designed for application with brush and roller. It is excellent for use at maintenance.


  • CARBO-KIT Carbozinc 858

    Features:

    • Designed for brush and roller application for touch up and maintenance
    • Outstanding application properties
    • Protects steel galvanically
    • Cures at low temperatures down to 2°C
    • Cured film is tough and abrasion resistant
    • Widely used within petrochemical-, offshoreshipping- and other heavy industries in severe environments with appropriate topcoat
    • No induction time
    • Prequalified in accordance with NORSOK M-501, Rev.6 System 1.

    Description:

    Carbo-Kit Carbozinc 858 is a high solid, organic zinc epoxy primer designed for corrosion protection of structural steel in salt and weathering environments. Carbo-Kit Carbozinc 858 is specially designed for application with brush and roller. It is excellent for use at maintenance.


  • Carbo-Kit Pyroclad X1

    Features:

    • Full jet fire certification in accordance with ISO 22899
    • Excellent hydrocarbon pool fire protection (ISO 834/BS-476)
    • LR, DNV & ABS certification
    • Successfully passed Norsok M-501 System 5A environmental test program without a topcoat
    • Superior weathering resistance
    • Very low moisture absorption
    • Explosion resistance
    • Extremely durable, impact resistant finish
    • High film build properties
    • Low flame spread and smoke development

    Description:

    Carbo-Kit Pyroclad X1 is designed to provide jet fire and hydrocarbon fire protection for structural elements, beams, columns, bulkheads, underdecks and risers. Carbo-Kit Pyroclad X1 is suitable for applications in the industrial, petrochemical, oil and gas, offshore and refining industries.


  • Carbomastic 15

    Features:

    • Unique formulation with lamellar aluminum flakes for exceptional barrier protection
    • Excellent performance over minimal surface preparation of steel substrates
    • Suitable as a topcoat for most tightly adhered existing coatings
    • Excellent choice for field touch-up of zinc-rich primers and galvanized steel
    • Available in a low temperature cure version (Carbomastic 15 FC)
    • Suitable for use under insulation on hot surfaces operating up to 300 °F (150 °C)
    • VOC compliant to current AIM regulations

    Description:

    Aluminum pigmented, low-stress, high-solids mastic with a proven field history. This unique formulation incorporates lamellar aluminum pigment for superior barrier protection. Carbomastic 15 was the pioneer mastic coating in a number of industrial markets and today still provides unmatched levels of barrier protection and corrosion resistance over existing finishes and rusted or SSPC-SP2 or SP3-cleaned steel.


  • Carbomastic 15 FC

    Features:

    • Unique formulation with lamellar aluminum flakes for exceptional barrier protection
    • Excellent performance over minimal surface preparation of steel substrates
    • Suitable as a topcoat for most tightly adhered existing coatings
    • Excellent choice for field touch-up of zinc-rich primers and galvanized steel
    • May be applied at 35°F (2°C) when CM 15 FC's part B is utilized
    • Suitable for use under insulation on hot surfaces operating up to 300°F(150°C)
    • VOC compliant to current AIM regulations

    Description:

    Aluminum pigmented, low-stress, high-solids mastic with a proven field history. This unique formulation incorporates lamellar aluminum pigment for superior barrier protection. Carbomastic 15 was the pioneer mastic coating in a number of industrial markets and today still provides unmatched levels of barrier protection and corrosion resistance over existing finishes and rusted or SSPC-SP2 or SP3-cleaned steel.


  • Carbomastic 15 LT

    Features:

    • Surface tolerant
    • Recommended for painting over rusted steel where hand cleaning only is possible
    • Carbomastic 15 LT penetrates through rust to steel substrate and stops further corrosion and undercutting
    • Fast curing at low temperatures
    • High solids give good coverage and reduced solvent emission
    • Excellent maintenance primer for piping, bridges, tank exteriors, ships and offshore structures etc..

    Description:

    Carbomastic 15 LT is a high build coating with excellent adhesion to rusted steel and most aged coatings.


  • Carbomastic 15 LT ATEX

    Features:

    • • Carbomastic 15 LT Atex has fast curing at Low Temperature (ambient).
    • • High solid give good coverage and reduce solvent emissions.
    • • In accorsance with CEI EN 60079.

    Description:

    Carbomastic 15 LT Atex is a high build coating with excellent adhesion and low temperature (ambient) curing. It is a modified epoxy mastic with antistatic and dissipative agents according to CEI EN 60079 ( electric construction for explosive gas atmospheres).


  • Carbomastic 18 BT

    Features:

    • Excellent immersion performance in both fresh and sea water
    • Suitable as a rust preventive coating in ballast tanks and hull applications
    • Ideal for sub-sea installations, jackets and other areas exposed to sea water
    • Can be applied as low as 5°C (40°F)
    • Good flexibility
    • Very good abrasion resistance
    • VOC compliant

    Description:

    Carbomastic 18 BT is a fast-curing, heavy-duty, high-build anti-corrosive coating with a broad and versatile list of uses in marine and other corrosive environments. It is an excellent choice for the protection of ship hull exteriors, underwater and ballast tanks. Offshore applications include sub-sea, jackets, production decks, drilling rig legs, pontoons, in immersed surfaces. It meets the demands in IMO Performance Standard for Protective Coatings. It is classified “B1” (Superior Grade) under DNV standard “Testing and Classification of Ballast Tank Coatings”.


  • Carbomastic 18 FC

    Features:

    • Excellent immersion performance in both fresh and sea water
    • Suitable as a rust preventive coating in ballast tanks and hull applications
    • Ideal for sub-sea installations, jackets and other areas exposed to sea water
    • Can be applied as low as 5°C (40°F)
    • Good flexibility
    • Very good abrasion resistance
    • High solids; low VOC

    Description:

    This epoxy is a fast-curing, heavy-duty, high-build anti-corrosive coating with a broad range of uses in marine and other corrosive environments. It is an excellent choice for the protection of ship hull exteriors, above and below the water line, ballast tanks, etc. Offshore applications include splash zones, subsea, jackets, production decks, drilling rig legs and pontoons in immersed exposures.


  • Carbomastic 18 FC Metallic

    Features:

    • Excellent immersion performance in both fresh and sea water.
    • Suitable as a rust preventing coating in ballast tanks.
    • Micaceous iron oxide (MiO) for additional barrier properties and corrosion resistance
    • Ideal for subsea installations, jackets and other areas prone to condensation.
    • Very good abrasion resistance.

    Description:

    Carbomastic 18 FC Metallic is a heavy duty, high build coating for protection of steel in corrosive environments. Contains additional filler reinforcement (micaceous iron oxide) for enhanced barrier resistant properties. Carbomastic 18 FC Metallic is excellent for use at low temperatures.


  • Carbomastic 18 NT

    Features:

    • Excellent immersion performance in both fresh and sea water.
    • Suitable as a rust preventing coating in ballast tanks.
    • Ideal for subsea installations, jackets and other areas prone to condensation.
    • Very good abrasion resistance.

    Description:

    Carbomastic 18 NT is a heavy duty, high build coating for protection of steel in corrosive environments. Gives a hard and smooth surface with excellent flexibility.


  • Carbomastic 19 AL

    Features:

    • Suitable as a topcoat for most tightly adhering existing coatings
    • Excellent choice for field touch-up of zinc-rich primers and galvanized steel
    • Unique formulation with aluminium flakes provides exceptional barrier protection
    • Contains 9 % aluminium by weight in the dry film
    • Can be used as a one-layer system
    • VOC compliant to current AIM regulations

    Description:

    Aluminium-pigmented high solids mastic with excellent barrier- and corrosion resistance. Carbomastic 19 AL is specifically designed for maintenance operations and has a high aluminium loading. Easy to apply with spray, brush and roller on top of existing coatings, rusted and St2/St3 cleaned steel.


  • Carbomastic 20

    Features:

    • Surface tolerant
    • Fast curing at low temperatures
    • High solids give good coverage and reduced solvent emission

    Description:

    Corrosion resistant epoxy mastic with very good protection against fresh- and salt water.


  • Carbomastic 21

    Features:

    • • Fast curing at Low Temperature.
    • • Used as a primer or intermediate.
    • • High solids, low VOC.

    Description:

    CARBOMASTIC 21 is a low temperature curing modified, two components, high solid epoxy-phenalkamine. Used either as a primer or intermediate coat over steel and zinc primers. Suitable for application over most existing coatings. Contact Carboline Technical Service for specifics.


  • Carbomastic 242

    Features:

    • Single coat application characteristics
    • Suitable as a topcoat for most tightly adhered existing coatings
    • Dry to handle in 24 hours at 20 °F (-7 °C)
    • Extended pot life at low temperatures
    • VOC compliant to current AIM regulations
    • Moisture curing capabilities in conjunction with cross-linking Epoxy

    Description:

    Aluminum-pigmented, low temperature curing mastic designed for cold weather applications down to 0 °F (-18 °C). This unique coating provides excellent corrosion resistance over existing finishes and rusted or SSPC-SP2 or SP3- cleaned steel.


  • Carbomastic 25

    Features:

    • Excellent immersion performance in both fresh and sea water.
    • Suitable as a rust preventing coating in ballast tanks.
    • Ideal for subsea installations, jackets and other areas prone to condensation.
    • Very good abrasion resistance.

    Description:

    Carbomastic 25 gives a smooth and hard surface. The coating is very solid and provides excellent protections against corrosion. Carbomastic 25 is suitable at application at low temperatures.


  • Carbomastic 55

    Features:

    • Excellent performance over minimal surface preparation of steel substrates
    • Excellent wetting properties
    • Excellent surface tolerance
    • Excellent choice for field touch-up of zinc-rich primers and galvanized steel
    • Suitable as a topcoat for most tightly adhered existing coatings
    • Unique formulation with aluminum flakes provides exceptional barrier protection
    • Available in a low temperature cure version (Carbomastic 652)
    • Suitable for use under insulation on hot surfaces operating up to 150°C (300°F)
    • VOC compliant to current AIM regulations

    Description:

    FORMERLY CARBOMASTIC 15 BNX. Aluminum-pigmented, low stress, high solids mastic with excellent surface tolerance properties and proven field history. Carbomastic 55 is specifically designed for maintenance operations as a barrier- and corrosion resistance over existing finishes and rusted or cleaned steel. Easy to apply with spray, brush and roller on top of existing coatings, rusted and St2/St3 cleaned steel


  • Carbomastic 615

    Features:

    • High solids, low VOC
    • Low temperature cure
    • Excellent wetting properties
    • Excellent surface tolerance
    • Excellent moisture tolerance (application)
    • Continues to cure underwater
    • Fast cure response
    • Suitable for immersion service in fresh or salt water after 60 minutes cure @ 75°F

    Description:

    High performance epoxy that has excellent resistance to fresh and salt water exposures. This coating exhibits outstanding moisture and surface tolerance during application, low temperature cure capability, and very fast cure response for quick return to service. It contains an inert flake reinforcement (micaceous iron oxide) to enhance film strength and performance. This product is ideal for industrial or heavy duty marine environments for the protection of steel against salt laden environments.


  • Carbomastic 615 AL

    Features:

    • Incorporates lamellar aluminum flakes to provide exceptional barrier protection
    • High solids, low VOC
    • Low temperature cure
    • Excellent wetting properties
    • Excellent surface tolerance
    • Excellent moisture tolerance after application
    • Fast cure response
    • Excellent choice for field touch-up of zinc-rich primers and galvanized steel
    • Suitable for immersion service in fresh or salt water after 2 hour cure @ 75°F

    Description:

    High performance, aluminum-filled epoxy that has excellent resistance to fresh and salt water exposures. This coating exhibits outstanding surface tolerance, low temperature cure capability, and very fast cure response for quick return to service. This lamellar aluminum-pigmented epoxy also contains inert flake reinforcement (micaceous iron oxide) to enhance film strength, barrier properties and overall performance.


  • Carbomastic 652

    Features:

    • Excellent anti-corrosive properties
    • Self-priming capability
    • Fast recoat time
    • Excellent leveling with good corrosion protection, also at low DFT
    • Very good abrasion resistance
    • NORSOK System 1 and 7B pre-qualified
    • Excellent for atmospheric and submerged corrosion protection

    Description:

    Carbomastic 652 is a heavy duty, high build primer or intermediate coating for protection of steel in corrosive environments or water immersion. Low temperature curing and fast overcoatable.


  • Carbomastic 90

    Features:

    • Very good performance over minimal surface preparation of steel substrates
    • Suitable as a tie-coat/topcoat for most tightly adhered existing coatings
    • Excellent film build on edges
    • Can be applied at temperatures as low as 40°F
    • VOC compliant to current AIM regulations

    Description:

    Economical, aluminum-pigmented mastic with excellent performance properties. Designed for a broad range of applications, this material provides good corrosion resistance, film build and surface tolerance. Can be applied at low temperatures and cures faster than many other epoxy mastics.


  • Carboseal LV Primer

    Features:

    • Low viscosity
    • Solvent free
    • Excellent anchoring to concrete-based substrates

    Description:

    Epoxy primer for surface treatment of concrete flooring and other cement-based surfaces. Provides excellent anchoring to the substrate when using Carboseal epoxy systems.


  • Carboseal SL Floor

    Features:

    • Carboseal SL Floor provide seamless and waterproof surfaces with good abrasion- and chemical resistance. Can be applied with different grades of slip resistance.

    Description:

    Used as seamless epoxy flooring on concrete exposed to medium to high wear in all types of industries, institutional and industrial facilities, workshops and warehouses.


  • Carbothane 133 HB

    Features:

    • Outstanding performance properties in both mild and aggressive environments
    • High build; suitable for many two-coat systems
    • Suitable for application direct to inorganic zincs
    • Application by spray, brush or roller
    • Indefinite recoatability
    • VOC compliant to current AIM regulations

    Description:

    High build, low sheen finish that has excellent resistance to corrosion, chemicals and abrasion. Suitable for application over a number of Carboline primers and intermediates, this material provides very good weathering performance in a broad range of colors.


  • Carbothane 133 HG

    Features:

    • Outstanding performance properties in both mild and aggressive environments
    • High build; suitable for many two-coat systems
    • Suitable for application direct to inorganic zincs
    • Application by spray, brush or roller
    • Indefinite recoatability

    Description:

    High build, glossy finish that has outstanding weathering resistance and colour retention. Suitable for application over a number of Carboline primers and intermediates, this material provides excellent corrosion resistance in a broad range of colours.


  • Carbothane 133 HG Clear

    Features:

    • Carbothane 133 HG Clear is used where there is a high expectation to finish. Especially recommended for transport equipment, machines and external side of containers and tanks.

    Description:

    Carbothane 133 HG Clear is a clear and glossy finish that has outstanding weathering resistance. Gives a smooth and hard surface that is easy to keep clean. Excellent resistance against spill of acids, alkalis, solvents, salt and water.


  • Carbothane 133 LH

    Features:

    • Exceeds SSPC Paint 36 specification for a Level 3 urethane
    • Outstanding performance properties in both mild and aggressive environments
    • High build; suitable for many two-coat systems
    • Application by spray, brush or roller
    • Indefinite recoatability
    • VOC compliant to current AIM regulations
    • Low HAPs content

    Description:

    High build, low sheen finish that has excellent resistance to corrosion, chemicals and abrasion. Suitable for application over a number of Carboline primers and intermediates, this material provides very good weathering performance in a broad range of colors.


  • Carbothane 134 CG

    Features:

    • Excellent weatherability
    • Available in most RAL & BS shades
    • Excellent flow characteristics allow for application by spray or roller
    • Excellent impact and abrasion resistance
    • VOC compliant

    Description:

    A two component polyurethane, high gloss finish, with good durability & UV resistance. Carbothane 134 CG produces a smooth, tough and easy to clean surface. Used in a variety of industries where a durable, high gloss finish is required.


  • Carbothane 134 Clear Coat

    Features:

    • Hard finish with excellent impact and abrasion resistance
    • Excellent resistance to UV degradation
    • Attractive gloss finish
    • Suitable for airless, conventional spray or roller application
    • VOC compliant to current AIM regulations
    • Indefinite recoatability
    • Improves resistance to graffiti over traditional urethane topcoats
    • Suitable for use as a metalizing sealer*

    Description:

    A clear coat finish that provides added UV protection over pigmented Carboline polyurethanes. Exceptionally hard film and excellent depth-of-image provide extended service life to the Carbothane® topcoats, especially when deeptone and metallic colors are used.


  • Carbothane 134 HG

    Features:

    • High solids, low VOC content
    • Excellent weatherability
    • Exceeds SSPC Paint 36 specification for a Level 3 urethane
    • Available in all Carboline colors including metallic-pigmented colors
    • Excellent flow characteristics allow for application by spray or roller
    • Superior impact and abrasion resistance
    • Indefinite recoatability
    • VOC compliant to current AIM regulations
    • Meets the requirements of AWWA D 102 Outside Coating System (OCS) 5 & 6
    • Suitable for use in USDA inspected facilities
    • Meets the performance requirements of MIL-PRF-85285E Type II, Class H Polyurethane
    • Meets the performance requirements of UFGS 09 97 13.27 Polyurethane Topcoat

    Description:

    Thin film, high gloss finish with exceptional weathering performance characteristics. Used extensively in virtually all industrial markets, 134 HG provides a smooth, durable finish that has superior resistance to corrosion, abrasion and chemical exposure.


  • Carbothane 134 HP

    Features:

    • High solids, low VOC content
    • Excellent weatherability
    • Exceeds SSPC Paint 36 specification for a Level 3 urethane
    • Available in custom colors
    • Excellent flow characteristics allow for application by spray or roller
    • Superior impact and abrasion resistance
    • Indefinite recoatability
    • VOC compliant

    Description:

    Thin film, high gloss finish with exceptional weathering performance characteristics. Used extensively in virtually all industrial markets, it provides a smooth, durable finish that has superior resistance to corrosion, abrasion and chemical exposure.


  • Carbothane 134 HP Clear

    Features:

    • • Excellent resistance to UV degradation.
    • • Attractive gloss finish.
    • • Suitable for airless, conventional spray or roller application.

    Description:

    Carbothane 134 HP Clear is a coat finish that provides added UV protection over pigmented Carboline polyurethanes.


  • Carbothane 134 HP Effect

    Features:

    Description:


  • Carbothane 134 HP Low Gloss

    Features:

    Description:


  • Carbothane 134 HS

    Features:

    Description:

    An attractive, high gloss, high solids topcoat which is easily applied by airless or conventional spray to yield a smooth, easily cleanable surface.


  • Carbothane 134 HS

    Features:

    • Excellent weatherability
    • Excellent flexibility
    • Excellent abrasion resistance
    • Available in Carboline’s Rapid Tint System
    • Meets most VOC requirements
    • Indefinite recoatability

    Description:

    An attractive, high gloss, high solids topcoat which is easily applied by airless or conventional spray to yield a smooth, easily cleanable surface. Recommended use as a finish coat for the exteriors of tanks, equipment, piping, structural steel, and concrete surfaces where chemical resistance, toughness, and weatherability are required. An excellent coating for use in chemical processing, pulp and paper, petro-chemical, bridge, offshore, railcars, heavy marine, institutional and waste treatment facilities where a highly resistant and attractive coating is desired. Not recommended for immersion service.


  • Carbothane 147

    Features:

    • • Excellent gloss and color retention.
    • • Excellent flexibility.
    • • Excellent abrasion resistance.
    • • Excellent weatherability.
    • • Good performance properties in both mild and aggressive environments.
    • • Suitable for application direct to inorganic zincs.
    • • Application by spray, brush or roller.

    Description:

    CARBOTHANE 147 a glossy, tile-like attractive topcoat, produces a smooth, slick and hard film. It exhibits excellent resistance to splash and spillage of salts and water. It is easily applied by airless or conventional spray.


  • Carbothane 156 SG

    Features:

    • Outstanding performance properties in both mild and aggressive environments
    • Excellent application properties
    • Applicable by spray, brush and roller
    • Suitable for application direct to galvanized steel
    • Indefinite recoatability

    Description:

    Carbothane 156 SG is a semi gloss finish. Suitable for application over a number of epoxy primers and intermediates, and can be applied directly on galvanized steel. Carbothane 156 SG provides good weathering performance in a broad range of colours with a surface that is easy to keep clean.


  • Carbothane 236

    Features:

    Description:


  • Carbothane 834

    Features:

    • Excellent weatherability
    • Excellent flexibility
    • Excellent abrasion resistance
    • Meets most VOC (Volatile Organic Content) requirements

    Description:

    Carbothane 834 (also known as Carbothane 134 HP), is an attractive, high gloss, high solids urethane topcoat which is easily applied by airless or conventional spray to yield a hard, very cleanable surface. It exhibits excellent flow and leveling properties to minimize dry spray and lampmarks.


  • Carbothane 8810

    Features:

    • Carbothane 8810 is used where normal corrosion protection properties are required. Particularly suitable for use within the chemical industry, for agricultural equipment and other heavy duty industry.

    Description:

    Carbothane 8810 is a corrosion protective coating:weathering resistant and colour stable. Gives a smooth and hard, easily cleanable surface with excellent resitance against splash and spillage of acids, alkalies, solvents, salt and water. Good abrasion resistance.


  • Carbothane 8814

    Features:

    • Carbothane 8814 is used where normal corrosion protection properties are required.
    • Particularly suitable for use within the chemical industry, for agricultural equipment and other heavy duty industry.

    Description:

    Carbothane 8814 is a corrosion protective coating; weathering resistant and colour stable. Gives a smooth and hard, easily leanable surface with excellent resistance against splash and spillage of acids, alkalies, solvents, salt and water. Good abrasion resistance.


  • Carbothane 8814 FC

    Features:

    • Carbothane 8814 FC is used where normal corrosion protection properties are required.
    • Particularly suitable for use within the chemical industry, for agricultural equipment and other heavy duty industry.

    Description:

    Carbothane 8814 FC is a corrosion protective coating; weathering resistant and colour stable. Gives a smooth and hard, easily leanable surface with excellent resistance against splash and spillage of acids, alkalies, solvents, salt and water. Good abrasion resistance.


  • Carbothane 8830

    Features:

    • Direct to metal (no primer necessary)
    • Can paint a wide range of metallic substrates (carbon steel, galvanized, aluminium, etc) and non-metallic (concrete).
    • The paint is elastic and glossy.
    • It has high build and outdoor resistance too. Up to 720 hours in the salt spray test.
    • It meets the requirements for category C5 Medium in accordance to ISO 12944-2 (shotblasted steel Sa 2.5).

    Description:

    A two component direct to metal polyurethane, high gloss finish, with good durability & UV resistance. Carbothane 8830 produces a smooth, tough and easy to clean surface. Used in various industries where a durable, high gloss finish is required.


  • Carbothane PU 134

    Features:

    • Excellent weatherability
    • Excellent flexibility
    • Excellent abrasion resistance
    • Optimal protection with minimum layer thickness
    • Excellent flow behavior with spray and roll application
    • Available in many colors
    • VOC compliant to current AIM regulation

    Description:

    A glossy, tile-like polyurethane topcoat which produces a smooth, slick and tough, easy to clean surface. Carbothane 134 PU has very good resistance to splash and spillage af acids, alkalies, most solvents and excellent splash and spillage resistance to salts and water


  • Carbothane PU 134 Clear

    Features:

    • • Excellent resistance to UV degradation.
    • • Excellent weatherability.
    • • Excellent impact resistance.
    • • Excellent abrasion resistance.
    • • Attractive gloss finish.
    • • Easy application with airless and conventional spray equipment.
    • • VOC compliant to current regulations.

    Description:

    A clear coat finish that provides added UV protection over pigmented Carboline coatings. Exceptionally hard film and excellent depth-of-image provide extended service life to the Carbothane® topcoats, especially when deeptone and metallic colors are used.


  • Carbothane PU 134 LG

    Features:

    • Excellent weatherability
    • Excellent flexibility
    • Excellent abrasion resistance
    • Optimal protection with minimum layer thickness
    • Excellent flow behavior with spray and roll application
    • Available in many colors
    • VOC compliant to current AIM regulation

    Description:

    A satin, tile-like polyurethane topcoat which produces a smooth, slick and tough, easy to clean surface. Carbothane 134 PU has very good resistance to splash and spillage af acids, alkalies, most solvents and excellent splash and spillage resistance to salts and water


  • Carbotherm 3300

    Features:

    • Excellent thin-film insulation
    • Unique formula provides superior coverage during application
    • Protects personnel from hot surfaces
    • Multi-purpose interior/exterior coating
    • Insulation provides anti-condensation properties
    • Easy to use
    • Zero VOC; Low odor
    • May be applied to hot surfaces

    Description:

    Carbotherm 3300 is a ceramic blend insulative composite coating formulated in a high temperature resistant acrylic binder. It is ideally suited as a protective heat barrier to shield personnel from hot surfaces. It also inhibits heat transfer into or out of a structure. Its insulative properties keeps structures exposed to solar radiation significantly cooler. It can be used to minimize or eliminate sweating of pipes or other operating equipment.


  • Carbotherm 551

    Features:

    • Excellent thin-film insulation
    • Unique epoxy formula outperforms acrylic-based materials
    • Tougher and more durable than acrylic coatings
    • Higher chemical resistance than acrylic coatings
    • Topcoats are optional
    • Protects personnel from hot surfaces
    • Ideal for industrial/aggressive applications
    • Insulation provides anti-condensation properties
    • Acceptable for use in USDA facilities
    • High film build per coat; fewer coats
    • Low VOC; low odor
    • May be applied to hot surfaces

    Description:

    Carbotherm 551 is a unique insulative composite coating formulated in a high temperature resistant epoxy binder. Unlike acrylic-based insulative materials it has superior toughness, hardness, impact resistance, chemical resistance and permeation resistance. It is therefore more suitable for industrial applications or other physically demanding environments. It is an ideal protective heat barrier to shield personnel from hot surfaces. It also inhibits heat transfer into or out of a structure. Its insulative properties keeps structures exposed to solar radiation significantly cooler. It can be used to minimize or eliminate condensation of pipes or other operating equipment. Its superior application properties of higher film build per coat and fewer coats offers savings and quicker return to service. Because it bonds directly to the surface (unlike standard insulation materials) it minimizes water entry and the effect of corrosion under insulation.


  • Carboweld 11

    Features:

    • Welds made over Carboweld 11 coated steel are equal in every respect to welds made to uncoated steel
    • Designed to protect steel during construction phase of projects under normal conditions
    • Can be topcoated for additional long term protection for atmospheric exposures.
    • Weld spatter does not adhere to or damage the coating
    • Can be welded as quickly and easily as bare steel at production line speeds without loss in strength or consistency of the weld
    • Dries to touch and to handle in 3 to 5 minutes
    • Certified as a pre-construction primer for Lloyds Register constructions

    Description:

    A weldable pre-construction inorganic zinc primer for shop use only.


  • Carboweld 11P

    Features:

    • Protects at least to 6 month in normal atmospheric environments.
    • Weld spatter does not adhere to or damage the coating.
    • Can be welded as quickly and easily as bare steel at production line speeds without loss in strength or consistency of the weld.
    • Dries to touch and handle in 3 to 5 minutes.
    • Compliant to IMO MSC.215(82) as shop primer for ballast tank coatings systems.

    Description:

    A weldable preconstruction inorganic zinc primer, used in shipyards and constructions workshops, Carboweld 11 P does not affect quality, speed of welding and cutting operations. Certified by most certification bodies. Contact Carboline Thechnical Service for any further information.


  • Carboxane 1020

    Features:

    • Isocyanate free
    • Prequalified in Norsok System 1
    • Fully recoatable
    • High solids Product
    • Can be applied with roller, brush or spray

    Description:

    Carboxane 1020 is a single component advanced topcoat with good gloss and colour retention. It does not contain isocyanates or generate isocyanates during fire or welding.


  • Carboxane 2000

    Features:

    • Isocyanate free
    • Exceptional weatherability
    • Outstanding color and gloss retention
    • Exceeds SSPC Coating Specification No. 36 Level 3A
    • Excellent corrosion protection
    • Meets ISO 12944 C3 High and C4 Medium, one coat applied at 5 to 7 mils DFT
    • High build, 3 to 7 mils DFT
    • Saves significant time, labor, and money
    • Long service life
    • VOC compliant
    • Excellent durability
    • Good flexibility and abrasion resistance
    • Long pot life

    Description:

    Carboxane 2000 is an isocyanate free, ultra-durable coating that provides outstanding color and gloss retention as well as excellent corrosion protection for exterior exposures. When used over a suitable primer (as a two coat system) Carboxane 2000 provides the barrier, corrosion resistance properties, and weatherability normally achieved with a three-coat system (primer, epoxy intermediate with an acrylic-polyurethane finish) for most environments. This significantly speeds up the painting process, saves labor, and saves money without sacrificing performance. This tightly cross-linked film utilizes a UV-resistant siloxane binder resulting in a finish with excellent corrosion protection and weathering performance that far exceeds aliphatic polyurethanes.


  • Carboxane 2000 Topcoat

    Features:

    • Exceptional weatherability
    • Especially used where polyurethane coatings are not desired
    • Long life performance
    • Isocyanate free
    • Excellent abrasion resistance
    • Excellent for use in chemical industry, offshore, ships, bridges, hydropower and other heavy industry

    Description:

    Carboxane 2000 Topcoat is an advanced topcoat with outstanding gloss and color retention for exterior exposures. Provides a high gloss surface and can be used where polyurethane coatings is not desired.


  • Carboxane 2000 WG

    Features:

    • Combined intermediate/topcoat over suitable primers.
    • Can be used directly on steel and concrete.
    • Excellent for use in chemical industry, offshore, ships, bridges, hydropower and other heavy industry.
    • High gloss.
    • Isocyanate free.

    Description:

    Carboxane 2000 WG is a combined inter-mediate/topcoat with excellent weathering properties.


  • Carboxane 2434

    Features:

    • Extremely long service life.
    • High gloss surface.
    • Fast drying at low temperatures.
    • Used for both maintenance and new construction.
    • Excellent for offshore installations, ships, trains, airplanes, bridges, refineries, marine structures etc.

    Description:

    Carboxane 2434 is a topcoat with EXTREMELY high weatherability, high gloss and colour retention. Excellent resistance to splash and spillage of petroleum products, dilute acids and alkalies.


  • Carbozinc 11

    Features:

    • Meets Class B slip co-efficient and creep testing criteria for use on faying surfaces.
    • Rapid cure. Dry to handle in 45 minutes at 60°F (16°C) and 50% relative humidity
    • Low temperature cure down to 0°F (-18°C)
    • High zinc loading
    • Meets FDA requirements
    • Zinc supplied meets ASTM D520 (Type II)*
    • Meets SSPC Paint 20 Type I, Level 1 for zinc content
    • Very good resistance to salting
    • May be applied with standard airless or conventional spray equipment
    • VOC compliant in many areas
    • Approved MPI #19

    Description:

    Time-tested corrosion resistant coating that provides excellent galvanic corrosion protection to steel in some of the harshest environments. For over five decades, Carbozinc 11 has been the industry standard for high-performance inorganic zinc protection on steel structures worldwide.


  • Carbozinc 11 FC

    Features:

    • Meets Class B slip co-efficient and creep testing criteria for use on faying surfaces.
    • Rapid cure.Dry to handle in 30 minutes at 75°F (24°C) and 60% RH
    • Can be topcoated in 4-5 hours at 75°F/24°C and minimum 60% RH
    • High zinc loading
    • Tolerant to mudcracking (up to 6 mils/150 microns)
    • Smooth uniform texture reduces topcoat bubbling
    • Meets FDA requirements in gray color
    • Very good resistance to salting
    • May be applied with standard airless or conventional spray equipment
    • Low HAPs content of 0.12 lbs/solid gallon

    Description:

    Time-tested corrosion resistant technology that protects steel galvanically in the harshest environments. For over five decades, Carbozinc 11 Series primers have been the industry standard for high-performance inorganic zinc protection on steel structures worldwide. Carbozinc 11 FC is a faster-cure formulation that allows fast topcoating times making it ideal for quick turn around projects.


  • Carbozinc 11 HS

    Features:

    • Meets Class B slip co-efficient and creep testing criteria for use on faying surfaces
    • Rapid cure. Dry to handle in 1 hour at 75°F (24°C) and 50% relative humidity
    • Low temperature cure down to 15°F (-9°C)
    • High zinc loading
    • Very good resistance to salting
    • May be applied with airless or conventional spray
    • Excellent as a lining for solvent storage
    • May be used as a weldable pre-construction primer
    • Exhibits long-term corrosion resistance
    • Ultra-low VOC level for solvent-based inorganic zincs

    Description:

    Ultra-low VOC member of the Carbozinc family with extraordinary corrosion resistance properties. Carbozinc 11 HS combines unparalleled performance characteristics with an ultra-low VOC formulation that meets some of the most stringent VOC restrictions.


  • Carbozinc 11 WB

    Features:

    • Excellent corrosion protection
    • High zinc loading per square foot
    • Zero VOC
    • Good resistance to salting
    • Fast curing, quick handling
    • Weldable version available Carboweld 11 WB
    • Excellent application characteristics (less likely to pump packing or tip plug)
    • Meets Class B slip coefficient and creep testing criteria for use on faying surfaces.

    Description:

    Carbozinc 11 WB is a water-based inorganic zinc rich primer that protects steel galvanically, eliminating subfilm corrosion. It meets VOC regulations while providing the proven performance of silicate zinc rich technology. It may be used as a primer under many different types of topcoats.


  • Carbozinc 658P

    Features:

    • • Easily applicable.
    • • Cures at low temperatures, 2°C (35°F).
    • • Hard tough film.
    • • Good flexibility.
    • • Excellent abrasion resistance.

    Description:

    Carbozinc 658 P is high solids, organic zinc epoxy primer, for protection of structural steel in salt or weathering environments. Excellent as a maintenance or general use zinc epoxy primer over blasted steel. Used within industry, petrochemical process, offshore or other heavy industries in severe environments with appropriate topcoats. Recommended for shop application where fast handling and re-coating are requested.


  • Carbozinc 851

    Features:

    • • Excellent application properties.
    • • Tough abrasion resistant film.
    • • Excellent adhesion.

    Description:

    A two-component, high solids, zinc rich epoxy primer formulated for the protection of properly prepared steel substrates. This product can be applied by conventional or airless spray. Recommended for Original Equipment Manufacturers where a high performance, highly corrosion resistant zinc primer is desired.


  • Carbozinc 858

    Features:

    • Outstanding application properties
    • Protects steel galvanically
    • Cures at low temperatures down to 2°C
    • Cured film is tough and abrasion resistant
    • Widely used within petrochemical-, offshore shipping- and other heavy industries in severe environments with appropriate topcoat
    • No induction time
    • Prequalified in accordance with NORSOK M-501, Rev.6 System 1.
    • N.B. an applied film of 90 microns DFT of Carbozinc 858 achieved accredited test certification for NORSOK M-501, Rev 4 System 1.

    Description:

    Carbozinc 858 is a high solid, organic zinc epoxy primer designed for corrosion protection of structural steel in salt and weathering environments. The paint is easy to apply and protects steel galvanically. Provides tough and abrasion resistant film.


  • Carbozinc 859

    Features:

    • Meets Class B slip co-efficient and creep testing criteria for use on faying surfaces
    • Rapid cure. Dry to recoat in 30 minutes at 75°F (24°C) and 50% relative humidity.
    • Complies with SSPC Paint 20 (Type II)
    • Low temperature cure down to 35°F (2°C)
    • Excellent adhesion
    • Protects against undercutting corrosion
    • Field proven primer that applies well by spray methods
    • Excellent touch-up primer by brush or roll for small areas.
    • VOC compliant to current AIM regulations
    • Approved for MPI #20

    Description:

    Low VOC organic zinc epoxy steel primer with extremely fast cure-to-topcoat characteristics for in-shop applications and quick turnaround requirements in the field. Carbozinc 859 has less than 3 lbs/gallon (359.5 g/l) VOC (thinned) and is used extensively in virtually all industrial markets.


  • Carbozinc 860

    Features:

    • Outstanding application properties
    • Protects steel galvanically
    • Cures at low temperatures down to 2°C
    • Cured film is tough and abrasion resistant
    • Widely used within petrochemical-, offshoreshipping- and other heavy industries in severe environments with appropriate topcoat
    • No induction time
    • Prequalified in accordance with NORSOK M-501, Rev.6 System 1.

    Description:

    Carbozinc 860 is an organic zinc epoxy primer designed for corrosion protection of structural steel in salt and weathering environments. The paint is easy to apply and protects steel galvanically. Provides tough and abrasion resistant film.


  • Carbozinc 8701

    Features:

    • Excellent application properties
    • Tough abrasion resistant film
    • Excellent adhesion & undercutting resistance
    • Superior corrosion resistance
    • Meets VOC (Volatile Organic Content) regulations
    • Fast drying for quick recoating

    Description:

    A two-component, high solids, zinc rich epoxy primer formulated for the protection of properly prepared steel substrates. This product can be applied by conventional or airless spray. Recommended for Original Equipment Manufacturers where a high performance, highly corrosion resistant zinc primer is desired. Typical applications include marine, offshore drilling equipment, truck trailer chassis, underbodies and related equipment, industrial and off-road machinery, electrical transformers, industrial tanks, vessels, pumps and processing equipment.


  • Coating Disbonder 8512

    Features:

    • Practical to use when traditional coating removal methods such as abrasive blasting or power tool cleaning cannot be performed due to environmental or health concerns
    • Well-suited to remove thick-film elastomers such as polyurethanes and polyureas.
    • Is often a more economical removal method over abrasive blasting

    Description:

    A single component, water-based coating which is designed to remove thick-film elastomers from steel substrates.


  • Firefilm 70-60 HF

    Features:

    • Fully tested and approved for UNI EN 13381-8 for cellulosic fire for 30,60 and 90 minutes fire duration.
    • Easy to apply be spray, roller or brush.
    • Gives a smooth matt finish. Compatible top coat of a variety of colours are available if a decorative finish is required.
    • Very low VOC. Contains no substances of very high concern.
    • Asbestos free
    • Can be used in area with limited ventilation.
    • Easy to repair

    Description:

    Firefilm 70-60 HF is a thin film coating for protection for protection of indoor steel constructions.


  • FIREFILM A6

    Features:

    • Smooth, decorative finish
    • Dust free Surface
    • Fast recoat, increased production
    • Ultra low VOC content

    Description:

    A decorative white thin film intumescent coating designed for the fire protection of internal structural steel up to 90 minutes.


  • Firefilm FC2

    Features:

    • Fast cure, early weather resistance, shower proof within 1 hour after application.
    • Low VOC
    • No solvent entrapment or prolonged solvent odour
    • High build potential with all ratings possible in one application
    • Designed for on-site and off-site use
    • Meets BS476 Part 20/21 up to 120 minutes
    • Meets EN13381: Part 6 & 8 Certification
    • Meets C1, C2, C3, C4 & C5 Environments Building Classification (ISO 12944)*

    Description:

    Firefilm FC2 is a low VOC, one coat, high build system, based on patented technology. It provides a fast cure effective structural fire performance, for steelwork, with up to a 120-minute fire rating


  • Multi-Gard 134WB

    Features:

    • Water-based Industrial Coating
    • Proven technology
    • Environmental friendly
    • Quick air drying, no baking required
    • Easy to mix
    • Easy to spray
    • Good colour and gloss retention
    • Good chemical resistance and mechanical properties

    Description:

    A high quality water based industrial two component full gloss polyurethane coating. Topcoat in epoxy/polyurethane coating systems where high demands are set with regard to colour retention, chemical resistance, gloss retention and mechanical properties.


  • Multi-Gard 17-1951

    Features:

    • Fast curing, tolerates quickly rain exposure
    • Forms tough and abrasion resistant coating that protects roof from weather and corrosion
    • Very good colour and gloss retention
    • Can also be used as weatherable topcoat in epoxy/polyurethane systems
    • Tested according to SS184006/SS-EN ISO 6270.

    Description:

    Multi-Gard 17-1951 is a fast curing, self-priming polyurethane finish for steel, aluminium, and galvanized surfaces, especially recommended for maintenance of coil sheet roofs and facades.


  • Multi-Gard 955 CP

    Features:

    • Low odor
    • Very high solids
    • Excellent wetting and flow properties
    • Easy 1:1 mix ratio
    • One coat system for a variety of substrates including CMU
    • VOC compliant to current AIM regulations

    Description:

    A solvent-free epoxy designed and uniquely formulated for use as a coating for aluminum casting quench pit environments. It has been tested by the Aluminum Association and found suitable for this use. In many cases it can be used as a one-coat system direct to steel or concrete. Has excellent wetting and flow properties and can be spray, brush or roller applied. It has a workable pot life (90 minutes at 75°F) and while plural spray equipment may be used, it is not required.


  • Multi-Gard Taklakk

    Features:

    Description:

    Finish coat with good weathering resistance. Easy to apply and maintain for application on wood, steel, roof tiles and corrugated iron.


  • Perlifoc HP

    Features:

    • CE Marked & ETA 18/0672
    • High performance filler-based formula
    • Non-combustible
    • Best thermal conductivity amongst spray-applied gypsum-based mortars
    • Asbestos free – Complies with regulations 2003/18/EC and RD 396/2006
    • Good adhesion on a variety of substrates
    • Better efficiency of the consumables in spray equipment due to less abrasive nature of the mortar
    • Best-in-class loadings for fire ratings up to 4 hours

    Description:

    Fireproof and ecological mortar for the passive fire protection of steel, concrete, composite concrete-steel sheet slab structural elements, fire compartmentation and fire stop partitions. Fire resistance of up to 4 hours depending on the construction system.


  • Perlifoc HP Eco+

    Features:

    • CE Marked & ETA 20/0894
    • High performance filler-based formula
    • Non-combustible
    • Best thermal conductivity amongst spray-applied gypsum-based mortars
    • Asbestos free – Complies with regulations 2003/18/EC and RD 396/2006
    • Good adhesion on a variety of substrates
    • Better efficiency of the consumables in spray equipment due to less abrasive nature of the mortar
    • Best-in-class loadings for fire ratings up to 4 hours

    Description:

    Fireproof and ecological mortar for the passive fire protection of steel, concrete, composite concrete-steel sheet slab structural elements, fire compartmentation and fire stop partitions. Fire resistance of up to 4 hours depending on the construction system.


  • Phenoline 1205

    Features:

    • Excellent resistance to ethanol, gasoline, jet fuels and solvents.
    • Excellent abrasion resistance.
    • Excellent thermal shock resistance (0 to 300° F).
    • VOC compliant to current AIM regulations.
    • Excellent resistance to deionized or demineralized water up to 203°F (95°C).
    • Excellent resistance to crude oil up to 250°F (121°C).
    • Excellent for crude oil storage and transportation up to 250° F (121° C)
    • Recommended for CS-1,3,4 and SS-1,2,3 systems of NACE SP0198 Standard Practice for coatings to control Corrosion Under Insulation (CUI).

    Description:

    Glass flake-filled coating with dense cross-linking that exhibits excellent overall chemical resistance to a variety of aggressive chemicals. Glass reinforcement provides added abrasion resistance, permeation resistance and internal reinforcement. 1205 exhibits very good acid resistance. Excellent for use as a lining for tanks or pipes in process facilities where hot water or abrasive conditions exist.


  • Phenoline 311 Primer

    Features:

    • Low temperature cure (20°F)
    • Excellent blast-hold protection
    • Suitable for use over damp concrete
    • Excellent application characteristics
    • Fast recoat times
    • Moisture tolerance during application
    • Meets VOC restrictions
    • Low HAP’s content
    • Certified by UL to meet the drinking water criteria of NSF/ANSI/CAN 600

    Description:

    A tank lining holding primer that has a variety of attributes including low-temperature cure, fast recoat times, moisture tolerance during application and cure, and excellent blast-hold protection. Phenoline 311 Primer is often used with thick film lining systems as a holding primer (maintain blast cleaning) and is suitable for both new tanks and relines. It exhibits excellent surface wetting characteristics and quick cure for handling. It contains high levels of inert flake reinforcement. Excellent for use as a bonding primer for linings when damp concrete or masonry substrates are encountered.


  • Phenoline 341

    Features:

    • Single coat, high performance protection
    • Low to no odor
    • Easy to apply by standard equipment
    • Excellent chemical resistance
    • Fast cure
    • Tough abrasion resistant film
    • Suitable for potable water use (complies with ANSI/NSF Standard 61) *
    • Excellent flexibility
    • Excellent corrosion protection
    • Impact resistant
    • Hi-build application in one coat
    • Low temperature cure (35°F)
    • * (Valid if manufactured at a certified location.)

    Description:

    Phenoline 341 is a solventless epoxy lining for a variety of cargos including water, potable water, wastewater, seawater, fuels, crude oils, and other solutions. It is applied by standard airless spray equipment, as a single coat lining for ballast tanks or other storage vessels. It is acceptable for use as a lining for potable water tanks of 75 gal or larger and pipe diameters of 16 inches or larger.


  • Phenoline 353

    Features:

    • Outstanding overall chemical resistance
    • Dense, highly cross-linked film for superior barrier protection
    • Excellent abrasion resistance and toughness
    • Well-suited for hydrocarbon exposures
    • Low temperature cure version available

    Description:

    Phenoline 353 is a highly cross-linked epoxy lining with extraordinary overall chemical resistance and versatility. It has a unique blend of resins that make it highly resistant to a variety of aggressive cargos like gasoline, gasoline blends, biodiesel, fuel oils, and others. It can be used is both acidic and high temperature caustic exposures. Markets served are terminals, refineries, petrochemical, wastewater, railcar linings, and many others.


  • Phenoline 353 LT

    Features:

    • Outstanding overall chemical resistance
    • Dense, highly cross-linked film for superior barrier protection
    • Excellent abrasion resistance and toughness
    • Well-suited for hydrocarbon exposures
    • Cures down to 35°F (2°C)
    • Meets NORSOK System 7C Requirements for subsea equipment up to 180°C (356°F)
    • Certified for UNE 48307 - Type I, classes I, IIA, IIB, IIA & IV

    Description:

    Phenoline 353 LT is a highly cross-linked epoxy lining with extraordinary overall chemical resistance and versatility. It has a unique blend of resins that make it highly resistant to a variety of aggressive cargos like ethanol, gasolines, gasoline blends, biodiesel, fuel oils, and others. It can be used is both acidic and high temperature caustic exposures. Markets served are terminals, refineries, petrochemical, wastewater, railcar linings, and many others. This low temperature cure formulation allows application and curing down to 2°C (35°F).


  • Phenoline 380

    Features:

    • Rapid cure-to-handle and cure-to-service characteristics
    • Single coat application reduces labor costs
    • Ultra-high build capabilities provide a void-free film and excellent edge protection.
    • Resistant to inorganic and organic acids, caustics and most solvents
    • Exceptional bond strength
    • Can be mat reinforced where exposure conditions dictate
    • VOC compliant to current AIM regulations

    Description:

    Single-coat, plural-component applied, ultra-high build coating for use on steel and concrete substrates where rapid cure characteristics are required. Phenoline 380 has the same application and physical properties of Phenoline 379 but also provides rapid cure to handle and cure characteristics.


  • Phenoline 385

    Features:

    • High solids; Low VOC formula
    • VOC compliant to current AIM regulations
    • Excellent for crude-oil storage
    • Excellent resistance to petroleum products
    • Excellent abrasion resistance
    • Excellent thermal shock resistance
    • Complies with MIL-PRF-4556F testing
    • Fully compliant with the EI1541 performance requirements for Aviation Fuel Handling Systems (commonly known as the Jet Fuel Gum Test)

    Description:

    High performance, high solids, epoxy lining that is recommended for a variety of petroleum storage products including 180°F (82°C) crude oil, demineralized water 150°F (65°C), crude/water mixtures, fuel oil, jet fuel, biodiesel, and gasoline. It is also a good choice for wastewater and water exposures. Product is self-priming and is normally applied in two coats. It is also suitable for food-grade (aqueous) cargos and meets the FDA requirements for 21CFR 175.300 for direct food contact.


  • Phenoline Tank Shield

    Features:

    • Batch mix formulation, single leg airless spray
    • High impact resistance
    • Superior adhesion to steel
    • Excellent resistance to water and salt water
    • Resistance to a broad range of fuels
    • Passes EI 1541 requirements for internal protective coating systems used in aviation fuel handling systems, including the jet fuel gum test
    • Adheres to API 653 inspection and API 652 guidelines for inspection intervals.
    • Resistant to hot water up to 180°F (82°C)
    • Excellent abrasion resistance and flexibility
    • Can be applied down to 35 °F (2 °C)
    • Can be applied as a single or multi-coat system
    • Non-blushing with a long recoat window
    • Low odor

    Description:

    This product is a solvent-free, high performance epoxy coating designed as an internal tank, valve and pipe lining for chemical or other commodity storage. It is a unique blend of resins and curing agents that allow batch mixing for ease of application. Plural component spray equipment is not required. The product is blush resistant and is typically applied at film thicknesses of 20 mils (500 microns) or thicker as needed (tank floors). It can handle exposures typically seen in the oil and gas industries; crude oils and fuels. It is resistant to NGL condensates, produced water, brines, industrial process water, waste water, and sewage. Ideal for municipal wastewater and water treatment facilities.


  • Phenoline Tank Shield Plus

    Features:

    • Excellent petrochemical resistance (fuels and crude)
    • High impact resistance
    • Superior adhesion to steel
    • Excellent hot water resistance
    • Excellent abrasion resistance
    • Can be applied as low as 35°F (2°C)
    • Tolerates low temperature excursions to 20°F (-7°C) during cure
    • Can be applied as a one-coat 20-80 mil system
    • Recommended as a petroleum tank bottom lining per API recommended practice 652.
    • Tank Shield Plus is a thick film reinforced lining proven to provide integrity at greater than 50 mils
    • Non-blushing, single or multi-coat system
    • Recommended as a petroleum tank bottom lining per API recommended practice 653.

    Description:

    This product is a solvent free, low temperature cure, high performance epoxy lining designed to handle common cargoes in the oil and gas industry including crude oil, gasoline, jet fuels, and diesel. It is resistant to NGL condensates, produced water, brines, industrial process water, waste water, and sewage. Ideal for Municipal wastewater and water treatment facilities. It can handle deionized water up to 180°F (82°C) and is applied at film thicknesses of 20-80 mils (500-1500 microns) in a non-blushing, single coat application. Tank Shield Plus has good elongation and proprietary reinforcement which enables it to bridge perforations which may occur from bottom side corrosion. Tank Shield Plus remains water tight over a hole in 2 atmospheres of head pressure.


  • Plasite 4301 HT

    Features:

    • Outstanding resistance to aggressive chemicals
    • Suitable for use as a highly chemically resistant lining
    • Excellent for splash, spill and film exposures on structural steel
    • Glass-flake reinforced film
    • High tensile and flexural strength
    • High film thickness

    Description:

    This high performance glass-flake filled coating was designed for application over steel or concrete in extreme chemical exposures. It is resistant to a wide variety of aggressive chemicals, including organic and inorganic acids, most alkalies, and many solvents. It is ideally suited for immersion service as internal steel tank linings, as well as for aggressive chemical splash, spill, and fume exposures on structural steel. Typical uses include steel tank and vat linings, secondary containment, structural steel, process floors, grating, sumps and trenches, scrubbers, and clarifiers.


  • Plasite 4550

    Features:

    • High Impact Resistance
    • Superior adhesion to metal substrates and concrete
    • Outstanding adhesion to stainless steel, even with low blast profiles
    • Well suited to protect alloy steels typically used to wet FGD systems where pitting and crevice corrosion often occur
    • Fast cure-to-service; depending upon application can be placed into service within 36 hours
    • Minimal blushing characteristics
    • Can be applied in temperatures as low as 35 °F (1.7 °C)
    • Can be applied as a one-coat system
    • Tested and approved for crude oil transportation up to 350 °F (177 °C)
    • Superior thermal shock resistance from -40 to 350 °F (-40-177 °C)
    • Complies with the API RP 652 definition of a reinforced liner.

    Description:

    PLASITE 4550 is a 100% solids, reinforced, premium novolac epoxy coating for internal tank lining. It is resistant to a broad range of chemicals such as fuels, salts, alkalis, strong inorganic acids, some solvents, sour crude oil and 98% sulfuric acid.


  • Plasite 4550 S

    Features:

    • High impact and thermal shock resistance
    • Superior adhesion to steel and concrete
    • Resistance to a broad range of chemicals
    • Can be applied up to 60 mils in one coat
    • Can be sprayed using single component airless equipment
    • Passes ASTM G210 - Severe Waste Water Analysis Test (SWAT)

    Description:

    PLASITE 4550 S is a 100% solids, flake filled, premium novolac epoxy coating designed for internal steel and concrete substrates. It is a two component system consisting of four-parts by volume of Part A resin and one part by volume of Part B hardener. It is applied by plural component or single component spray equipment, from a total thickness of 20-60 mils (500-1500 microns) in a single coat application for a variety of applications. This product has been tested and is approved for crude oil storage and transportation up to 350°F (177°C). It has superior thermal shock resistance over the range -40° to 350°F (-40 to 177°C). Typical Uses: Crude oil tankers, chemical storage tanks, wastewater clarifiers, plating vats, oil storage tanks, catwalks, pulp and paper liquor tanks or concrete exposures in wastewater applications.


  • Plasite 4555 S

    Features:

    • High impact resistance
    • Superior bond strength to steel and concrete
    • Resistance to a broad range of chemicals
    • Can be applied in a one-coat application up to 30 mils/.75 mm
    • Easily repaired using inter-coat prep procedures

    Description:

    Plasite 4555 S is a 100% solids, flake-filled, premium novolac epoxy coating designed for internal steel and concrete tanks and pipe lining. It is a two component system consisting of 4-parts by volume of Part A resin and one part by volume of Part B hardener. It is applied by plural component or single component spray equipment, in a one-coat application (25-30 mils) for internal lining applications.


  • Plasite 4660

    Features:

    • Solvent free
    • Excellent chemical resistance
    • High abrasion resistance
    • Short curing times
    • 1-layer-system

    Description:

    Plasite 4660 provides outstanding chemical resistance, abrasion and corrosion protection to a wide variety of steel and concrete substrates in aggressive environments at elevated temperatures. It’s application range includes internal coating for storage tanks for crude oil, hydrocarbons, chemicals and process & pressure vessels of all kinds. Approved for use in potable water tanks at temp. up to 85°C.


  • Plasite 7122

    Features:

    • Versatile coating with wide chemical resistance
    • Excellent abrasion resistance
    • Excellent thermal shock resistance
    • Excellent resistance to fuels
    • Long history of performance
    • Self-priming

    Description:

    This lining-grade epoxy has wide chemical resistance and is suitable for use as a chemically resistant coating for aggressive atmospheric exposures or as a lining for a variety of chemical exposures. It is suitable for use in food-grade service where product purity (taste and odor) are critical. It has excellent abrasion and thermal shock resistance.


  • Plasite 7122 HAR

    Features:

    • Versatile coating with wide chemical resistance
    • Outstanding abrasion resistance
    • Excellent thermal shock resistance
    • Excellent resistance to fuels
    • Long history of performance
    • Self-priming

    Description:

    This lining-grade epoxy has wide chemical resistance and is suitable for use as a chemically resistant coating for aggressive atmospheric exposures or as a lining for a variety of chemical exposures. It is suitable for use in food-grade service where product purity (taste and odor) are critical. Specially formulated with high abrasion resistant fillers for outstanding abrasion and thermal shock resistance.


  • Plasite 7122 TFE

    Features:

    • Versatile coating with wide chemical resistance
    • Excellent abrasion resistance
    • Excellent thermal shock resistance
    • Excellent resistance to fuels
    • Long history of performance
    • Self-priming

    Description:

    This lining-grade epoxy has wide chemical resistance and is suitable for use as a chemically resistant coating for aggressive atmospheric exposures or as a lining for a variety of chemical exposures. It is suitable for use in food-grade service where product purity (taste and odor) are critical. It has excellent abrasion and thermal shock resistance. It has superior release properties to reduce or avoid issues with product cargoes such as sticking, hang-ups or bridging.


  • Plasite 7122 VAR

    Features:

    • Excellent overall chemical resistance to a wide range of acids, alkalies and solvents.
    • Superior abrasion resistance and good flexibility
    • Complies with FDA 21CFR 175.300 criteria for food contact

    Description:

    A cross linked epoxy-phenolic cured with a polyamine curing agent. Formulated with particular attention to wide chemical resistance and ease of handling. Plasite 7122 VAR, is an abrasion resistant tank lining and industrial maintenance coating.


  • Plasite 7122 VOC

    Features:

    • Excellent overall chemical resistance to a wide range of acids, alkalies and solvents.
    • Very good abrasion resistance and flexibility
    • Complies with FDA 21CFR 175.300 criteria for food contact

    Description:

    A cross linked epoxy-phenolic cured with a polyamine curing agent. Formulated with particular attention to wide chemical resistance and ease of handling. Plasite 7122 VOC is used as a tank lining and for industrial maintenance.


  • Plasite 7122 VTF

    Features:

    • Excellent overall chemical resistance to a wide range of acids, alkalies and solvents.
    • Smooth non-stick surface.
    • Very good abrasion resistance and flexibility.
    • Complies with FDA 21CFR 175.300 criteria for food contact.

    Description:

    A cross linked epoxy-phenolic cured with a polyamine curing agent. Formulated with particular attention to wide chemical resistance and ease of handling. Plasite 7122 VTF, is a PTFE filled tank lining for use where the surface requires release properties to reduce product sticking and bridging.


  • Plasite 7159

    Features:

    • Easy-to-apply high performance thin film lining
    • Protects I high temperature demineralized water immersion - 212°F (100°C)
    • Recommended in high pressure three phase service up to 250°F (121°C)
    • Can be air dried or force cured for prompt service

    Description:

    A water-resistant, phenolic epoxy coating polymerized with a polyamine type curing agent. A high performance lining for elevated temperature and pressure immersion services in high purity water, as well as the oil/water separating processes encountered in the petroleum industry.


  • Plasite 7159 HAR

    Features:

    • Easy-to-apply high performance thin film lining
    • Protects I high temperature demineralized water immersion - 212°F (100°C)
    • Recommended in high pressure three phase service up to 250°F (121°C)
    • Can be air dried or force cured for prompt service
    • Outstanding abrasion resistance

    Description:

    A water-resistant, phenolic epoxy coating polymerized with a polyamine type curing agent. A high performance lining for elevated temperature and pressure immersion services in high purity water, as well as the oil/water separating processes encountered in the petroleum industry. This HAR version of Plasite 7159 is extremely abrasion resistant.


  • Plasite 9060

    Features:

    • Excellent overall chemical resistance to a wide range of acids, alkalies and solvents
    • Very good abrasion resistance and flexibility
    • Complies with FDA 21 CFR 175.300 criteria for food contact

    Description:

    A high solids modified epoxy cured with an amine adduct curing agent. Designed specifically as a highly chemical-resistant, non-toxic, tank lining.


  • Plasite 9060 LT

    Features:

    • Outstanding overall chemical resistance
    • Dense, highly cross-linked film for superior barrier protection
    • Superior immersion resistance
    • Excellent abrasion resistance and toughness
    • Well-suited for hydrocarbon exposures
    • Formulated for use in a large variety of facilities including waste water, chemical and fuel storage, wet-gas pipelines, rail cars, barges and ship tanks
    • Bis A free
    • Cures down to 35°F (2°C)

    Description:

    Plasite 9060 LT is a high performance tank lining with curing characteristics allowing the coating to be applied and cure at temperatures as low as 35°F (2°C) while achieving unmatched chemical resistance in caustic, acid, solvent and ethanol service. The diversity of chemical resistance and unique low temperature curing allows the owner flexibility with their equipment. For industrial use only.


  • Polyclad 704

    Features:

    • • Low ambient temperature cure system (-10°C to +10°C).
    • • Excellent corrosion resistance to marine environments.
    • • Excellent corrosion resistance to buried pipes and tanks.
    • • Excellent resistance to cathodic disbondment.
    • • Excellent resistance to electric insulation (12.000 Volts/mm).
    • • May be applied in a single coat wet on wet at standard dry film thickness of 2.000 µm.
    • • Superior wetting properties and excellent adhesion to steel.
    • • Can be topcoated with CARBOTHANE® series for long term color and gloss
    • retention.

    Description:

    Polyclad 704 is a very high performance structural coating. The product is designed to be used on steel pipe exteriors, coating girth welds on steel pipe and other repairs ( PE, PP, etc.) as recommended.


  • Polyclad 767

    Features:

    • Fast curing rate increases throughput
    • Superior wetting properties result in better edge retention and excellent adhesion to steel
    • Mix ratio of 1:1 and user friendly application properties
    • Unlimited build with single multi-pass coats
    • Self priming (120 mil maximum for potable water)
    • Meets AWWA C222
    • UL approved for ANSI/NSF Std. 61 potable water

    Description:

    Polyclad 767 is a top-tier pipe coating engineered for superior performance in safeguarding both pipeline interiors and exterior pipes. Specifically formulated to excel in various applications, this cutting-edge coating is designed to provide exceptional protection for water transmission pipelines, wastewater treatment facilities (both municipal and industrial), and interior tank linings. Elevating its versatility, Polyclad 767 extends its protective prowess to include exterior pipe services, ensuring comprehensive coverage for both the interior and exterior surfaces.


  • Polyclad 777 Fast-Set

    Features:

    • Fast curing rate increases throughput
    • Excellent abrasion resistance
    • Superior wetting properties for outstanding adhesion
    • Mix ratio 1:1 and user friendly application properties
    • Can be topcoated with Carbothane series of products
    • Unlimited build with single multi-pass coats
    • Compliant with AWWA C222
    • Compliant with EN 10290

    Description:

    Polyclad 777 Fast Set is a high performance 100% solids structural polyurethane designed to provide superior corrosion protection for steel, ductile iron and concrete pipe. Tenacious adhesion and high impact resistance allow its use in the harshest environments. It forms a dense, long-term impermeable barrier that is ready for service moments after application through a snap-set cure mechanism. Typical uses include steel pipeline exteriors, steel valves & fittings, steel pilings, steel poles (above & below ground), buried tank exteriors, penstocks. No primer is required. Available in snap, fast, medium and slow set times.


  • Polyclad 777 Medium-Set

    Features:

    • Rapid curing to increase through put
    • Excellent abrasion resistance
    • Superior wetting properties for outstanding adhesion
    • Robust 1:1 mix ratio and user friendly application properties
    • Can be topcoated by Carbothane aliphatic polyurethanes
    • Unlimited build with single multi-pass coats
    • Compliant with AWWA C222

    Description:

    Polyclad 777 Medium Set is a high performance 100% solids structural polyurethane designed to provide superior corrosion protection for steel, ductile iron and concrete pipe. Tenacious adhesion and high impact resistance allow its use in the harshest environments. It forms a dense, long-term impermeable barrier that is ready for service moments after application through a snap-set cure mechanism. Typical uses include steel pipeline exteriors, steel valves & fittings, steel pilings, steel poles (above & below ground), buried tank exteriors, penstocks. No primer is required. Available in snap, fast, medium and slow set times.


  • Polyclad 777 PL

    Features:

    • Fast curing increases throughput
    • Excellent abrasion resistance
    • Superior wetting properties for outstanding adhesion
    • Mix ratio of 1:1 with easy application properties
    • Can be topcoated with Carbothane series of products
    • Unlimited film build with single or multi-pass coats

    Description:

    Polyclad 777 PL is a high performance 100% solids structural polyurethane designed to provide superior corrosion protection for steel, ductile iron and concrete pipe. Typical uses include pipeline exterior surfaces. Tenacious adhesion and high impact resistance allow its use in the harshest environments. It forms a dense, long-term impermeable barrier that is ready for service moments after application through a fast-set cure mechanism. No primer is required.


  • Polyclad 777 Slow-Set

    Features:

    • Fast curing increases throughput
    • Excellent abrasion resistance
    • Superior wetting properties for outstanding adhesion
    • Mix ratio 1:1 and user friendly application properties
    • Can be topcoated by Carbothane series of products
    • Unlimited build with single multi-pass coats
    • Compliant with AWWA C222
    • Compliant with EN 10290

    Description:

    Polyclad 777 Slow Set is a high performance 100% solids structural polyurethane designed to provide superior corrosion protection for steel, ductile iron and concrete pipe. Tenacious adhesion and high impact resistance allow its use in the harshest environments. It forms a dense, long-term impermeable barrier that is ready for service moments after application through a snap-set cure mechanism. Typical uses include steel pipeline exteriors, steel valves & fittings, steel pilings, steel poles (above & below ground), buried tank exteriors, penstocks. No primer is required. Available in snap, fast, medium and slow set times.


  • Polyclad 777R

    Features:

    • Low temperature cure
    • Quick cure to handle
    • Superior wetting properties and outstanding adhesion to steel
    • Excellent edge retention
    • Mix ratio of 1:1 and user friendly application properties
    • Up to 80 mils build with a single application
    • Can be topcoated with Carbothane series of products for long-term color and gloss retention

    Description:

    Polyclad 777 R is a high performance, 100% solids structural polyurethane designed to repair Polyclad 777 or 777 PL when it has been damaged. It can be used on steel pipe exteriors, coating girth welds on steel pipe and other repairs as recommended.


  • Polyclad 951

    Features:

    • Improves flow efficiency in gas pipes
    • Excellent flow and leveling
    • Single-coat application
    • Hard, smooth, glossy finish
    • Excellent abrasion resistance
    • Meets all criteria of API RP 5L2
    • Long pot life

    Description:

    Polyclad 951 flowliner is an epoxy lining for “dry” natural gas transmission pipelines. It is designed to increase flow efficiency of natural gas in pipelines. This lining provides a smooth surface inside the pipe that will increase flow and reduce energy cost of transporting natural gas. Polyclad 951 offers corrosion protection of pipes during storage. It fully meets criteria of API RP 5L2 for gas transmission pipelines.


  • Polyclad 952

    Features:

    • Improves flow efficiency in gas pipes
    • Excellent flow and leveling
    • Single-coat application
    • Hard, smooth, glossy finish
    • Excellent abrasion resistance
    • Meets all criteria of API RP 5L2
    • Corrosion prevention during storage

    Description:

    Polyclad 952 flowliner is an epoxy lining for “dry” natural gas transmission pipelines. It is designed to increase flow efficiency of natural gas in pipelines. This lining provides a smooth surface inside the pipe that will increase flow and reduce energy cost of transporting natural gas. Polyclad 952 offers corrosion protection of pipes during storage. It fully meets criteria of API RP 5L2 for gas transmission pipelines.


  • Polyclad 956

    Features:

    • Improves flow efficiency in gas pipes
    • Meets API RP5L2 requirements for gas transmission pipeline flow liner
    • Excellent flow and leveling
    • Single-coat application
    • Hard, smooth, glossy finish
    • Excellent abrasion resistance
    • Corrosion prevention during storage

    Description:

    A solvent-less, high gloss, smooth epoxy coating for the lining of gas transmission pipelines. It’s hard, smooth surface aids in the flow of gas by reducing turbulence while protecting the interior surfaces from corrosion. It has excellent flow and wetting characteristics ideal for this type of application and use. Tested in accordance with API RP 5L2 for gas transmission pipelines.


  • Polyclad 975

    Features:

    • Quick dry to touch and QC times
    • Color indicator confirms proper mixing
    • Low temperature cure 40°F (4.4°C)
    • Excellent cathodic protection performance
    • Film build up to 50 mils DFT in one coat
    • Excellent edge retention
    • Superior adhesion to steel
    • Excellent adhesion over prepared FBE, epoxy and polyurethane coated pipe
    • Can be applied by spray, brush, roller or dual cartridge

    Description:

    Polyclad 975 is an advanced 100% solids, hybrid epoxy pipeline coating. Polyclad 975 has performance properties designed for corrosion protection of steel and ductile iron pipe exteriors, girth welds or tie-ins. It can be used for new pipe or rehabilitation of coated pipe. Polyclad 975 cures fast to allow quick QC and backfill times.Polyclad 975 is designed for spray application. Use Polyclad 975 H for hand applied applications.


  • Polyclad 975 H

    Features:

    • Quick dry to touch and QC times
    • Good brush and roll properties
    • Color indicator confirms proper mixing
    • Low temperature cure 40°F (4.4°C)
    • Excellent cathodic protection performance
    • Film build up to 30 mils DFT in one coat
    • Excellent edge retention
    • Superior adhesion to steel
    • Excellent adhesion over prepared FBE, epoxy and polyurethane coated pipe
    • Can be hand applied by brush or roller

    Description:

    Polyclad 975 H is an advanced 100% solids, hybrid epoxy pipeline coating. It has performance properties designed for corrosion protection of steel and ductile iron pipe exteriors, girth welds or tie-ins. Polyclad 975 H cures fast to allow quick QC and backfill times. H in 975 H stands for hand applied version. Polyclad 975 is the spray version.


  • Polyclad ARO

    Features:

    • Excellent gouge and abrasion resistance
    • High crosslink density results in tough film
    • Excellent adhesion to prepared FBE, Polyclad 975 and other coatings
    • Protects FBE, and other base coats during directional drilling applications
    • Zero VOCs, 100% solids
    • Apply up to 125 mils (3.2 mm) in one application
    • Rapid dry to handle, less than 20 minutes

    Description:

    Polyclad ARO is a high performance pipe coating specially designed for the protection of FBE coated pipeline from gouge and mechanical damage during directional drilling or slip bore installations. Polyclad ARO is applied directly over FBE as an abrasion resistant overlay (ARO) and provides superior protection in rocky, rough and mountainous environments. It absorbs the destructive energy and minimizes coating damage.


  • Pyroclad X1

    Features:

    • Full jet fire certification in accordance with ISO 22899
    • Excellent hydrocarbon pool fire protection (ISO 834/BS-476)
    • LR, DNV & ABS certification
    • Successfully passed Norsok M-501 System 5A environmental test program without a topcoat
    • Superior weathering resistance
    • Very low moisture absorption
    • Explosion resistance
    • Extremely durable, impact resistant finish
    • High film build properties
    • Low flame spread and smoke development

    Description:

    Pyroclad X1 is designed to provide jet fire and hydrocarbon fire protection for structural elements, beams, columns, bulkheads, underdecks and risers. Pyroclad X1 is suitable for applications in the industrial, petrochemical, oil and gas, offshore and refining industries.


  • Pyrocrete 241

    Features:

    • Over 40 years of proven performance
    • Exceptional durability and toughness
    • UL 1709 hydrocarbon fire rated up to 4 hours
    • Jet fire rated up to 2 hours
    • ASTM E119 cellulosic fire rated up to 4 hours
    • Cryogenic protection against LNG spills and immersion exposures
    • Resistant to 3 bar blast overpressure
    • Hose stream resistant
    • UL 2431 Category I-A Outdoor Heavy Industrial and Exterior Environmental Purpose
    • Tolerant to wide range of climates
    • Lightweight – one-fifth the weight of concrete for equal fire protection
    • Ideal for onsite and offsite application
    • Easy application by spray or trowel
    • Nonflammable – during or after application
    • Chloride and sulfide free – no special priming required
    • Asbestos-free – complies with EPA and OSHA regulations
    • Non-friable – high impact strength

    Description:

    A 55 lb./ft³ (881 kg/m³) density, Portland cement based, cementitious fireproofing. It provides both hydrocarbon and cellulosic fire protection for structural steel and can also be used to upgrade the fire resistance of existing concrete. Recommended areas of application include refineries, petrochemical, pharmaceutical facilities, pulp and paper mills, offshore platforms, nuclear and conventional power plants, factories, warehouses, institutional and biomedical facilities.


  • Pyrocrete 241 HD

    Features:

    • Heavy duty, ultra high density formulation
    • Highest durability and toughness on the market
    • UL 1709 hydrocarbon fire rated up to 4 hours
    • ISO 22899-1 jet fire rated up to 2 hours
    • ASTM E119 cellulosic fire rated up to 4 hours
    • Cryogenic protection against LNG spills and immersion exposures
    • Resistant to 3 bar blast overpressure
    • Hose stream resistant
    • Tolerant to wide range of climates
    • Lightweight – one-fifth the weight of concrete for equal fire protection
    • Ideal for onsite and offsite application
    • Easy application by spray or trowel
    • Nonflammable – during or after application
    • Chloride and sulfide free – no special priming required
    • Asbestos-free – complies with EPA and OSHA regulations
    • Non-friable – high impact strength

    Description:

    A 70 lb./ft³ (1,121 kg/m³) density, Portland cement based, cementitious fireproofing. It provides both hydrocarbon and cellulosic fire protection for structural steel and can also be used to upgrade the fire resistance of existing concrete. Recommended areas of application include refineries, petrochemical, pharmaceutical facilities, pulp and paper mills, offshore platforms, nuclear and conventional power plants, factories, warehouses, institutional and biomedical facilities.


  • Pyrocrete 241 HY

    Features:

    • Cost effective, high yield
    • Exceptional durability and toughness
    • UL 1709 hydrocarbon fire rated up to 4 hours
    • ISO 22899-1 jet fire rated up to 2 hours
    • Cryogenic protection against LNG spills and immersion exposures
    • Resistant to 3 bar blast overpressure
    • Hose stream resistant
    • Tolerant to wide range of climates
    • Lightweight – one-fifth the weight of concrete for equal fire protection
    • Ideal for onsite and offsite application
    • Easy application by spray or trowel
    • Nonflammable – during or after application
    • Chloride and sulfide free – no special priming required
    • Asbestos-free – complies with EPA and OSHA regulations
    • Non-friable – high impact strength

    Description:

    A 50 lb./ft³ (800 kg/m³) density, Portland cement based, cementitious fireproofing. It provides both hydrocarbon and cellulosic fire protection for structural steel and can also be used to upgrade the fire resistance of existing concrete. Recommended areas of application include refineries, petrochemical, pharmaceutical facilities, pulp and paper mills, offshore platforms, nuclear and conventional power plants, factories, warehouses, institutional and biomedical facilities.


  • Pyrocrete 40

    Features:

    • Cost effective fireproofing solution
    • Outstanding coverage, high build
    • Exceptional durability and toughness
    • UL 1709 hydrocarbon fire rated up to 4 hours
    • BS 476 hydrocarbon fire rated up to 4 hours
    • ISO 22899-1 jet fire rated up to 2 hours
    • ASTM E119 cellulosic fire rated up to 4 hours
    • Cryogenic protection against LNG spills and immersion exposures
    • Resistant to 3 bar blast overpressure
    • Hose stream resistant
    • Tolerant to wide range of climates
    • Lightweight – one-fifth the weight of concrete for equal fire protection
    • Easy application by spray or trowel
    • Nonflammable – during or after application
    • Chloride and sulfide free – no special priming required
    • Asbestos-free – complies with EPA and OSHA regulations
    • Non-friable – high impact strength

    Description:

    A minimum 40 lb./ft³ (640 kg/m³) density, Portland cement based, cementitious fireproofing. It provides both hydrocarbon and cellulosic fire protection for structural steel and can also be used to upgrade the fire resistance of existing concrete. Recommended areas of application include refineries, petrochemical, pharmaceutical facilities, pulp and paper mills, offshore platforms, nuclear and conventional power plants, factories, warehouses, institutional and biomedical facilities.


  • Pyrocrete 40T

    Features:

    • Cost effective fireproofing solution
    • Outstanding coverage, high build
    • Exceptional durability and toughness
    • RWS Curve - Fire Test Tunnel Linings rated up to 3 hours by Efectis & Tecnalia
    • UL 1709 hydrocarbon fire rated up to 4 hours
    • ISO 22899-1 jet fire rated up to 2 hours
    • ASTM E119 cellulosic fire rated up to 4 hours
    • Cryogenic protection against LNG spills and immersion exposures
    • Resistant to 3 bar blast overpressure
    • Hose stream resistant
    • Tolerant to wide range of climates
    • Lightweight – one-fifth the weight of concrete for equal fire protection
    • Ideal for onsite application
    • Easy application by spray or trowel
    • Nonflammable – during or after application
    • Chloride and sulfide free – no special priming required
    • Asbestos-free – complies with EPA and OSHA regulations
    • Non-friable – high impact strength

    Description:

    A 40 lb./ft³ (640 kg/m³) density, Portland cement based, cementitious fireproofing. It provides both hydrocarbon and cellulosic fire protection for tunnel's concrete and can also be used to upgrade the fire resistance of prior existing concrete. Recommended areas of application include refineries, petrochemical, pharmaceutical facilities, pulp and paper mills, offshore platforms, nuclear and conventional power plants, factories, warehouses, institutional and biomedical facilities.


  • PYROCRETE 60

    Features:

    • Formulation with high performance light fillers.
    • Non-combustible.
    • High durability.
    • It is recommended to be projected with a discontinuous machine to optimise performance.
    • Asbestos free. Complies with regulations 2003/18/CE and RD 396/2006.
    • High adhesion on metal and concrete substrates.
    • Lightweight and low abrasive with projection equipment. Savings in consumables.
    • Low protection thickness.
    • Tolerates a wide range of weather conditions.

    Description:

    Portland cement based, low density, fireproof mortar, with high performance against fire for the protection of metal and concrete structures. Density 375 Kg/m3 . High fire performance, optimised consumption and savings in consumables. Suitable for the architectural and construction market.


  • Rustbond NG

    Features:

    • Universal primer and tie-coat.
    • Cures down to 2°C (36°F).
    • Excellent adhesion to SSPC-SP 2 / St2 prepared steel, galvanized steel, aluminum, stainless steel or copper.
    • Flexible film.
    • High solids.
    • Low odor.
    • Contains corrosion inhibitors.
    • Compatible with a variety of topcoats.
    • User friendly application by brush and roller.
    • Low VOC

    Description:

    Rustbond NG is a cross-linked penetrating primer/sealer with good wetting properties. It is highly flexible and accepts a variety of topcoats. Recommended use as primer/sealers for marginally prepared steel and over old coatings. Its excellent wetting properties allows it to penetrate rust and discontinuities in existing coatings and provide a firm anchorage for a variety of topcoats. Its thixotropic properties reduces the runoff; thus, the edges of the existing coating are properly encapsulated, reducing underlying corrosion and peeling. This product can also be used as a tack coat when a coating exceeds its “maximum recoating time”. Consult Carboline Technical Service for specific recommendations.


  • Sanitile 120

    Features:

    • Excellent primer/sealer for drywall
    • Glue-like bond to almost any surface
    • Outstanding tie-coat over existing coatings
    • Single component, thin-film application
    • Topcoat with virtually any generic coating
    • Ready-to-apply as supplied
    • Fast drying
    • Low odor; low VOC
    • Suitable for use in USDA inspected facilities

    Description:

    Universal bonding primer that adheres tenaciously to virtually any surface including galvanized and stainless steel, aluminum, PVC, FRP and ceramic tile. It can also be used on porous and high PH substrates (up to 12.5) like concrete and cementitious patching compounds.


  • Semstone 110

    Features:

    • Outstanding wetting properties
    • Solvent-free
    • Long working time
    • Excellent adhesion
    • Compatible with a variety of toppings

    Description:

    Two part epoxy exhibiting superior adhesion to concrete and steel. Used primarily as a primer/sealer for concrete surfaces and top coated with a variety of chemically resistant toppings.


  • Semstone 140

    Features:

    • Excellent resistance to chemical attack
    • Excellent abrasion and impact resistance
    • Exceptional thermal shock resistance
    • Superior bonding properties
    • High cohesive strength
    • Low permeability
    • Low odor

    Description:

    High performance lining system designed for concrete. Semi-leveling coating which may be applied as an aggregate filled and/or reinforced coating system. Specially formulated to withstand some of industry’s most aggressive chemicals.


  • Semstone 145

    Features:

    • Excellent resistance to chemical attack
    • Excellent abrasion and impact resistance
    • Exceptional thermal shock resistance
    • Superior acid resistance
    • Superior bonding qualities
    • High cohesive strength
    • Low permeability
    • Low odor

    Description:

    100% solids, high performance, novolac epoxy lining system designed for concrete. It is a semi-leveling coating and may be applied as an aggregate filled and/or reinforced coating system. Specially formulated to withstand some of industry’s most aggressive chemicals, including 98% sulfuric acid, as well as many organic chemicals and solvents.


  • Semstone 145 SL

    Features:

    • Excellent resistance to chemical attack
    • Excellent abrasion and impact resistance
    • Exceptional thermal shock resistance
    • Superior adhesion to both steel or concrete
    • High cohesive strength
    • Low permeability
    • Low odor

    Description:

    High performance, 100% solids, novolac epoxy coating designed for concrete protection against chemical attack and physical abuse. This coating has been specially formulated with vertical film build characteristics for application to walls (and floors alike) to provide an outstanding barrier against some of industry’s most aggressive chemicals, including 98% sulfuric acid as well as many organic chemicals and solvents.


  • SP-2881

    Features:

    • Outstanding protection of buried pipes and tanks to mechanical and abrasion damage
    • Excellent corrosion protection for structures in marine and chemical environments
    • Excellent corrosion resistance to sea and fresh water immersion
    • Excellent resistance to cathodic disbondment
    • Excellent resistance to electric insulation (12000 volts/mm)

    Description:

    An ultra high solids, self-priming epoxy coating with excellent corrosion resistance to marine and petrochemical environments. SP-2881 is used primarily for the corrosion protection of buried pipes and tanks.


  • SP-2882

    Features:

    • Outstanding protection of buried pipes and tanks to mechanical and abrasion damage
    • Excellent corrosion resistance to marine and chemical environments
    • Excellent corrosion resistance to buried pipes and tanks
    • Excellent resistance to mechanical and abrasion damage
    • Excellent resistance to cathodic disbondment
    • Excellent resistance to electric insulation (12000 volts/mm)

    Description:

    An ultra high solids, self-priming epoxy coating with excellent corrosion resistance to marine and petrochemical environments. SP-2882 is used primarily for the corrosion protection of buried pipes and tanks.


  • SP-2884

    Features:

    • Outstanding protection of buried pipes and tanks to mechanical and abrasion damage
    • Excellent corrosion resistance to marine and chemical environments
    • Excellent corrosion resistance to buried pipes and tanks
    • Excellent resistance to mechanical and abrasion damage
    • Excellent resistance to cathodic disbondment
    • Excellent resistance to electric insulation (12000 volts/mm)

    Description:

    An ultra high solids, self-priming epoxy coating with excellent corrosion resistance to marine and petrochemical environments. SP-2884 is used primarily for the corrosion protection of buried pipes and tanks. It is designed for brush and roll use only.


  • Splash Zone A-788

    Features:

    • Designed for underwater and other wet applications
    • Can be applied up to 2" in thickness
    • Self-priming on most surfaces and over most generic types of coatings
    • Rapid cure characteristics
    • VOC compliant to current AIM regulations

    Description:

    Solvent-free patching compound used for repairing pits, cracks and voids in steel, concrete, wood and other surfaces. Has the unique ability to be mixed, applied and cured underwater.


  • Surface Cleaner 3

    Features:

    Description:

    Surface Cleaner 3 is designed for use with airless cleaning equipment and manual use. It removes oil, grease, etc. from heavily contaminated surfaces resistant to strong alkaline detergents such as construction equipment, plastic covers, workshop floors, - walls, - roofs etc.


  • Surface Preparation 1

    Features:

    Description:

    A surface treatment agent for preparing previously coated surfaces for recoating after they have been allow to cure past recommended recoating times, or have been exposed to sunlight for extended periods of time. This treatment ensures good adhesion between coats.


  • Thermaline 2977

    Features:

    • Excellent “hot” application characteristics, may be applied over hot substrates up to 300°F (149°C)
    • Will air dry “tack free” at ambient but will remain soft until heat curing has been achieved
    • Typically topcoated with a silicone or modified silicone finish

    Description:

    A heat resistant primer for use on steel substrates that may reach up to 800°F (426°C).


  • Thermaline 400 GS

    Features:

    • Temperature resistance to 400°F(204°C)
    • Very good flexibility
    • Excellent overall chemical resistance
    • Very good abrasion resistance
    • Easily applied by spray
    • Acceptable for use over stainless steel

    Description:

    Thermaline 400 GS is an epoxy-phenolic coating specifically formulated to handle high temperature (400°F/204°C) steel substrates exposed to conditions typically found under insulation. It has exceptional resistance to wet/dry heat cycling exposures found in these applications. It satisfies the NACE Standard Practice (SP0198) to handle corrosion under insulation (CUI) for both carbon steels and austenitic stainless steel substrates at elevated temperatures.


  • Thermaline 4000

    Features:

    • Inorganic; stable; inert polymer
    • Outstanding durability
    • Excellent corrosion protection (used over Carbozinc inorganic primers)
    • High temperature resistance (800 °F [426 °C])
    • VOC compliant
    • Cures at ambient conditions (hard in 2 hours)
    • Cures down to 40 °F (4 °C)
    • Does not require heat cure for high-temp service
    • Outstanding resistance to handling damage
    • Single-package

    Description:

    Thermaline 4000 is a high heat polymer coating used for the protection of equipment operating at elevated temperatures. It is typically used over Carbozinc® inorganic zinc primers for outstanding corrosion protection and heat resistance. The combination of the zinc primer with this finish provides exceptional performance in durability. Unlike most high temperature silicone-based technologies with soft films, Thermaline 4000 does not require a heat cure for film forming properties. It cures hard rapidly under ambient conditions (humidity greater than 30%).


  • Thermaline 440

    Features:

    • Versatile use from cryogenic temperatures of -320°F (-196°C) up to 400°F (204ºC) exposures
    • Very good flexibility
    • Excellent overall chemical resistance
    • Very good abrasion resistance
    • Easily applied by spray
    • Acceptable for use over stainless steels

    Description:

    Thermaline 440 (formerly Thermaline 400 EU) is a high performance, immersion grade coating system which has excellent resistance to wet/dry cycling conditions at elevated temperatures.


  • Thermaline 450

    Features:

    • Temperature resistance up to 450 °F (232 °C)
    • High-build single-coat capabilities
    • Excellent resistance to thermal shock
    • Superior abrasion and chemical resistance
    • Glass flake reinforcement
    • Ambient-temperature cure
    • VOC compliant to current AIM regulations

    Description:

    Highly cross-linked, glass-flake filled polymer that offers exceptional barrier protection and resistance to wet/dry cycling at elevated temperatures. Suitable for insulated or uninsulated pipes, stacks and equipment operating up to 450 °F (232 °C). This coating provides excellent resistance to corrosion, abrasion and permeation, and its novolac-modification resists severe chemical attack. This extreme performance product has decades of performance and is recommended for CS-1,3,4 and SS-1,2,3 systems of NACE SP0198 Standard Practice for coatings to control corrosion under insulation (CUI).


  • Thermaline 450 EP

    Features:

    • Versatile use from cryogenic to 400°F (204°C) exposures
    • Very good flexibility
    • Excellent overall chemical resistance
    • Very good abrasion resistance
    • Easily applied by spray
    • Acceptable for use over stainless steels
    • High solids, low VOC formula

    Description:

    A high performance immersion-grade coating system which has excellent resistance to wet/dry cycling conditions at elevated temperatures. It is typically used on hot steel substrates under insulation operating continuously up to 400°F, 204°C. It has excellent chemical resistance properties to handle the corrosive effects of wet insulation under thermal cycling conditions. This coating is recommended for NACE SP0198 Standard Practice for coatings to control corrosion under insulation (CUI) system numbers CS-1, CS-3, CS-4, SS-1, SS-2, and SS-3.


  • Thermaline 4674

    Features:

    • Resistant to thermal shock conditions from ambient temperature to 400ºC.
    • May be applied directly to properly prepared steel. Application over inorganic zinc primers like Carbozinc 11 will provide superior performance by preventing rusting and rust streaking during a shutdown or when the equipment is exposed to moisture and/or salts at temperature less than 93ºC.
    • Excellent weathering properties.

    Description:

    Single package medium to high temperature coating that withstands continous temperature up to 400ºC peaks up to 540ºC.


  • Thermaline 4674 black

    Features:

    • • Resistant to thermal shock conditions from ambient temperature to 400°C.
    • • May be applied directly to properly prepared steel.
    • • Application over inorganic zinc primers CARBOZINC, like Carbozinc 11, will provide superior performance by preventing rusting and rust streaking during
    • a shutdown or when the equipment is exposed to moisture and/or salts at temperature less than 93°C.
    • • Excellent weathering properties.

    Description:

    Single package medium to high temperature coating that withstands continuous temperatures of 400°C and peaks up to 540°C. For the protection of the exterior of equipment such as stacks, incinerators, furnace exteriors, and heat exchangers and other elevated temperature steel surfaces.


  • Thermaline 4700

    Features:

    • Resistant to severe thermal shock
    • Provides outstanding long-term performance when applied over Carbozinc inorganic zinc primers
    • Provides barrier protection prior to heat curing (full film physical properties occur after heat curing)

    Description:

    High-performance finish for areas exposed to extreme temperatures. Suitable for service from 400°F-1004°F (204°C-540°C) Color stability at maximum temperature will depend on color selected.


  • Thermaline 4700 Aluminium

    Features:

    • Resistant to severe thermal shock
    • Provides outstanding long-term performance when applied over Carbozinc inorganic zinc primers
    • Air-dries to touch (full film formation properties occurs after heat curing)

    Description:

    High-performance finish for areas exposed to extreme temperatures. Suitable for service from 400°F-1000°F (204°C-538°C) Color stability at maximum temperature will depend on color selected. Requires heat curing.


  • Thermaline 4700 VOC

    Features:

    • Resistant to severe thermal shock
    • Provides outstanding long-term performance when applied over Carbozinc inorganic zinc primers
    • Provides barrier protection prior to heat curing (full film physical properties occur after heat curing)
    • VOC compliant

    Description:

    High-performance finish for areas exposed to extreme temperatures. Suitable for service from 400°F-1004°F (204°C-540°C) Color stability at maximum temperature will depend on color selected.


  • Thermaline 4765

    Features:

    • Zinc rich formulation provides outstanding corrosion resistance
    • Air dries to touch at ambient temperatures
    • Is resistant to severe thermal shock
    • Provides outstanding long-term performance and appearance when topcoated with Thermaline Silicone Finishes

    Description:

    Corrosion resistant primer used over carbon steel in areas exposed to extreme temperatures. Suitable for service from 400°F - 1200°F. Thermaline 4765 may be used in high temperature service under insulation when top coated with Thermaline 4700.


  • Thermaline 4900

    Features:

    • Temperature resistance up to 260°C (500°F) for black **
    • Air-dried curing capabilities
    • Single-coat application
    • Excellent resistance to thermal shock
    • Good weathering and color stability
    • RTS colors available

    Description:

    Air-dried coating available in colors and suitable for high temperature exposures up to 260°C (500°F). Air-drying characteristics allow for faster handling of in-shop applications than with other high-temperature coatings. Heat cure above 149°C (300°F) is recommended and will impart added strength and integrity to the coating.


  • Thermaline 4900 Aluminum

    Features:

    • Temperature resistance up to 273°C (525°F)
    • Air-dried curing capabilities
    • Single-coat application
    • Excellent resistance to thermal shock
    • Good weathering and color stability

    Description:

    Air-dried coating available in colors and suitable for high temperature exposures up to 273°C (525°F). Air-drying characteristics allow for faster handling of in-shop applications than with other high-temperature coatings. Heat cure above 149°C (300°F) is recommended and will impart added strength and integrity to the coating.


  • Thermaline 4900 VOC Aluminum

    Features:

    • Temperature resistance up to 525°F (273°C)
    • Single-coat application
    • Excellent resistance to thermal shock
    • Good weathering
    • VOC compliant

    Description:

    Air-dried coating suitable for high temperature exposures up to 525°F (273°C). Air-drying characteristics allow for faster handling of in-shop applications than with other high-temperature coatings. Heat cure above 300°F (149°C) is acceptable and will impart added strength and integrity to the coating.


  • Thermaline 550

    Features:

    • Elevated temperature resistant.
    • Very good flexibility.
    • Easily applied by spray.
    • Can be applied over steel and stainless steels.
    • Qualified by EDF (Electricité de France) - FNP Register N° 1110.
    • Can be applied over Carbozinc 11.

    Description:

    A high performance product which has excellent resistance to dry cycling conditions at elevated temperatures. Used to protect steel substrates for atmospheric exposure and under thermal insulation.


  • Thermaline Heat Shield

    Features:

    • Unique reinforced but flexible polymer film
    • Versatile use from cryogenic to 1200°F (650°C) exposures
    • Dries to handle without heat cure (See curing schedule)
    • Outstanding barrier properties
    • Protects steel from thermal wet cyclic conditions
    • Suitable for both shop and field application
    • Provides corrosion protection even with ambient temperature cure
    • Meets ISO 12944-6 C5-M Medium
    • Self priming or apply over Carbozinc 11 primers when uninsulated
    • Protects stainless steels from chlorides and stress corrosion cracking
    • Very fast recoat times

    Description:

    This is an extreme performance coating for hot, cryogenic and cycling exposures. Thermaline Heat Shield contains a unique blend of plate-like reinforcing pigments fortified with an inert polymeric matrix. The resulting film provides an outstanding barrier against corrosives and harsh exposures typically seen in elevated temperature environments. This versatile coating is ideal for all piping, vessels and equipment operating from cryogenic conditions up to 650 ºC (1200°F). It is particularly well suited to prevent corrosion under insulated equipment/piping for both carbon steel substrates and stainless steels. This fortified coating has superior shop handling properties over standard silicone coatings (see Curing). It is recommended for CS-6 and SS-5 systems of NACE SP0198 Standard Practice for coatings to control corrosion under insulation (CUI).


  • Thermo-Lag 270

    Features:

    • Flexible
    • Hard, dust free surface
    • Allows easy replacement of cables
    • Water-based product, low odor
    • Asbestos-Free – complies with EPA and OSHA regulations
    • Factory Mutual – tested and approved
    • Does not de-rate cables
    • Weathering – approved for exterior use
    • Quality Manufactured – under strict Carboline quality standards
    • Provides protection at 1/16” Dry Film Thickness

    Description:

    A water based mastic that can be applied to electrical cables to retard fire propagation. Once applied, it meets code and insurance requirements for interior and exterior use. It provides a hard and flexible surface that will not dust, flake, or spall.


  • Thermo-Lag 3000-P

    Features:

    • Provides a flexible fire protection solution to structural steelwork, process vessels, divisions and electrical raceways for 1 through 4 hours.
    • Lowest thickness per fire rating of any competitive epoxy intumescent coating.
    • Inherently flexible and durable formulation designed to withstand abrasion, vibration, handling, transportation and erection stresses in any climate.
    • Formulated to maintain it’s flexibility, elongation and fire resistive properties throughout its service life regardless of climate.
    • Engineered to resist extreme and rapid temperature cycles without cracking or disbondment.

    Description:

    Thermo-Lag 3000-P is a flexible, two-component epoxy Intumescent Fireproofing coating designed to provide asset integrity from the damaging effects of hydrocarbon fires. Since 1999 Thermo-Lag 3000-P has provided fire protection in the harshest of environments, such as oil, gas, refineries, power, marine, petrochemical, and LNG facilities.


  • Thermo-Lag 3000-SP

    Features:

    • Provides a flexible fire protection solution to structural steelwork, process vessels, divisions and electrical raceways for 1 through 4 hours.
    • Lowest thickness per fire rating of any competitive epoxy intumescent coating.
    • Inherently flexible and durable formulation designed to withstand abrasion, vibration, handling, transportation and erection stresses in any climate.
    • Formulated to maintain it’s flexibility, elongation and fire resistive properties throughout its service life regardless of climate.
    • Engineered to resist extreme and rapid temperature cycles without cracking or disbondment.
    • Extensive outgas testing for controlled cleanroom and sterile environments.

    Description:

    Thermo-Lag 3000-SP is a flexible, two-component epoxy Intumescent Fireproofing coating designed to provide asset integrity from the damaging effects of hydrocarbon fires. Since 1999 Thermo-Lag 3000-SP has provided fire protection in the harshest of environments, such as oil, gas, refineries, power, marine, petrochemical, and LNG facilities. Thermo-Lag 3000-SP has been extensively and independently tested in accordance with: UL 1709, UL 2431 Category I-A, ISO 834-3, IMO FTP Code (IMO A.754(18) for H-0, H-60 & H-120 Divisions, ASTM E84, ASTM E119, ISO 20340, NORSOK M-501 5A Fire and Corrosion Testing, and NFPA 290 (extended to 150 minutes).


  • Thinner n° 4001/10 (EU)

    Features:

    Description:


  • Thinner n°10 (EU)

    Features:

    Description:


  • Thinner n°15 (EU)

    Features:

    Description:


  • Thinner n°19 (EU)

    Features:

    Description:


  • Thinner n°2 (EU)

    Features:

    Description:


  • Thinner n°21 (EU)

    Features:

    Description:


  • Thinner n°213 (EU)

    Features:

    Description:


  • Thinner n°214 (EU)

    Features:

    Description:


  • Thinner n°215 (EU)

    Features:

    Description:


  • Thinner n°25 (EU)

    Features:

    Description:


  • Thinner n°26 (EU)

    Features:

    Description:


  • Thinner n°33 (EU)

    Features:

    Description:


  • Thinner n°41

    Features:

    Description:


  • Thinner n°71 (EU)

    Features:

    Description:


  • Thinner n°76 (EU)

    Features:

    Description:


  • Thinner n°82 (EU)

    Features:

    Description:


  • Thinner no. 10

    Features:

    Description:


  • Thinner no. 15

    Features:

    Description:


  • Thinner No. 2

    Features:

    Description:


  • Thinner no. 21

    Features:

    Description:


  • Thinner no. 25

    Features:

    Description:


  • Thinner no. 31

    Features:

    Description:


  • Thinner no. 33

    Features:

    Description:


  • Thinner no. 41

    Features:

    Description:


  • Thinner no. 45

    Features:

    Description:


  • Thinner no. 75

    Features:

    Description:


  • Thinner no. 7582

    Features:

    Description: