Features:
Description:
Renowned high build coal tar epoxy polyamide for protection of steel and concrete in single or two-coat applications in a broad variety of aggressive industrial applications.
Features:
Description:
The product is a biologically degradable liquid without any hazardous substances. It is approved as a HOCNF Class Yellow product, and can be disposed to drains/sewage systems without containment. Active ingrediants are citric acid, phosphoric acid, inhibitor and water. It has a light red colour, sour smell and a pH value of 1,1 til 1,7 with density 1.14 g/cm3.
Features:
Description:
The product is a biologically degradable liquid without any hazardous substances. It is approved as a HOCNF Class Yellow product, and can be disposed to drains/sewage systems without containment. Active ingrediants are citric acid, phosphoric acid, inhibitor and water. It has a light red colour, sour smell and a pH value of 1,1 til 1,7 with density 1.23 g/cm3.
Features:
Description:
Carbocoat 111, quick drying, is a high quality industrial protective coating. It can be applied with conventional air or airless spray systems.
Features:
Description:
Carbocoat 1310 Primer is a multipurpose primer with excellent adhesion to steel, iron and cast iron. The primer is fast drying and can be used for most industrial services in normal corrosive environment. Recommended for OEM and maintenance applications.
Features:
Description:
Rust preventing primer. Use with or without topcoat. Typically used as a primer above water line on areas like superstructure, topside, deck, stores room, cargo hold etc.
Features:
Description:
Carbocoat 1343 Finish has good light- and weather resistance and is suitable for use both in- and outdoors.
Features:
Description:
Carbocoat 1390 Finish is a high gloss, fast drying topcoat with good weathering properties for use in mild corrosive environment.
Features:
Description:
Heavy-duty primer formulated to provide long term protection of structural steel. It provides excellent adhesion and can be welded through to yield sound welds.
Features:
Description:
Carbocoat AQ 3327 has very good adhesion to most surfaces. The product dries quickly and has good flexibility and abrasion resistance.
Features:
Description:
Carbocoat HT Finish is an air-drying single package topcoat for use on iron, steel and cast iron substrates. Good light- and weathering resistance. Suitable for both indoors and outdoors use.
Features:
Description:
Carbocoat HT Primer is a multipurpose primer with excellent adhesion to steel, iron and cast iron. The primer is fast drying.
Features:
Description:
Carbocrylic 1290 is a topcoat with excellent weathering performance. Gives a glossy, smooth and hard surface that is easily cleanable.
Features:
Description:
Carbocrylic 1290 ATEX is a topcoat with antistatic and dissipative agens according to CEI EN 60079 (Electric costruction in explosives gas atmospheres).
Features:
Description:
A semi-glossy, attractive, maintenance topcoat having good weathering resistance and colour retention. The smooth, slick film minimises dirt pick-up. Easily applied by spray and has rapid drying characteristics. Exhibits excellent adhesion to properly prepared aged epoxies. It can be used direct to metal and applied at sub zero surface temperatures.
Features:
Description:
Carbocrylic 1295 HS is a high solids topcoat with good weathering capabilities. Offers a glossy, smooth, hard finish that is easy cleanable. One coat application capable.
Features:
Description:
Carbocrylic 3325 Primer has very good adhesion to most substrates. The primer is very fast drying and has good elasticity and abrasion resistance.
Features:
Description:
Carbocrylic 3358 IMC is normally used as an intermediate coat in a three coat system. Can be topcoated with several generic types of topcoats. Excellent abrasion resistance and flexibility with good chemical resistance. Provides very good corrosion protection with a suitable primer. May be used as a primer in mild corrosive exposure.
Features:
Description:
A single-component durable, high performance direct-to-metal acrylic coating for use where excellent weathering properties and chemical resistance are required. Use as a direct-to-metal acrylic coating for tank exteriors, railcars, piping, and structural steel, as well as other exterior and interior uses. May also be used as a finish coat over recommended primers.
Features:
Description:
Carbocrylic 3359 TC is a topcoat in a two- or three coat system. Excellent film properties, high gloss and good weatherability. Provides very good corrosion protection with a suitable primer system.
Features:
Description:
Carboglas 1590 system provides excellent resistance to numerous petroleum products and other liquids. Cures to a tough, abrasion resistant film. 250 microns Carboglas 1590 contain 60 layers of glassflake, making the film very resistant to penetration in aggressive environments.
Features:
Description:
This extremely durable and chemically resistant cladding utilizes a multi-step curing process that incorporates chemically-fused glass flake reinforcing in a highly cross-linked polyester matrix. The resultant layer is an extremely durable barrier against a variety of exposures including marine, fresh water, salt water, both mineral and organic acids, bleach solutions, and free chlorine. The multi-layer glass-flake reinforcement greatly impedes the penetration of water and other corrosives making this system extremely long performing.
Features:
Description:
Carboglas 1601 SZ is an extremely abrasion and chemical resistant polyester coating. Multiple layers of glass flakes are incorporated in a highly cross-linked polyester matrix. The resultant tight film makes this coating extremely long performing.
Features:
Description:
Carboguard 102 (ex Apsacoat 102), is a very high solids self-priming coating. Excellent corrosion resistance product to marine/chemicals environments. Used for the corrosion protection of buried tanks and pipes.
Features:
Description:
Carboguard 104 is solvent free and it is a very high solids self priming coating. Applied only by brush.
Features:
Description:
Ultra-durable solvent-free coating for use on steel and concrete substrates subject to severe impact and physical abuse. This aggregate filled coating offers exceptional abrasion resistance in heavy-duty marine and splash zone environments. It is ideal for high abuse areas on offshore structures exposed to aerated sea water (splash zone), boat landing areas, or working decks, lay down areas, helidecks, or walkways. It can be also be used for buried pipe due to its outstanding physical durability. Consult Carboline Tech Service for high profile non-skid applications.
Features:
Description:
Dense, highly impermeable glass flake-filled coating used for protecting steel and concrete. This versatile coating provides an impenetrable film for severe exposures in marine, offshore, petrochemical, pulp and paper and other aggressive environments. Optional use of light or course grit fillers provides nonskid properties.
Features:
Description:
Penetrating primer/sealer for use on concrete substrates and Carboline Pyrocrete Fireproofing products. It performs extremely well in sealing cementitious surfaces and is designed to receive a variety of different generic types of finish coats. Some recommended uses of 1340 include the use as a curing compound or form release agent. When applied to “green” concrete it will retard the escape of moisture during the cure period. It is also excellent for use as a form release coating on plywood or steel forms.
Features:
Description:
Carboguard 1341 Clear is a fast drying, clear penetrating primer/sealer for use on concrete substrates before topcoating.
Features:
Description:
Epoxy-polyamide primer with zinc phosphate.
Features:
Description:
Carboguard 60 is a high solids, versatile, abrasion resistant, chemical resistant, and corrosion resistant coating. It can be used as a primer, intermediate coat, or self-priming finish over steel or inorganic zinc primers. May be topcoated with itself, or a broad variety of high performance finish coats. This product has excellent wetting properties giving it the capability of going over marginally prepared substrates. It is ideal for maintenance and fabrication shop applications. An optional Glass Flake (GF) additive or micaceous iron oxide (MiO) additive can be purchased separately and may be used to enhance film strength for more abusive applications for severe marine or heavy industrial uses. Consult Technical Service for suitability as a lining or other exposures.
Features:
Description:
An epoxy that has a variety of attributes including low-temperature cure, fast recoat time, moisture tolerance during application.
Features:
Description:
Carboguard 632 Sealer is a tie-coat specially designed for application on top of metalized steel and inorganic zinc silicate. To be used to avoid pore development in successive coat.
Features:
Description:
Carboguard 633 is a heavy duty, high build primer or intermediate coating for protection of steel in corrosive environments. Can be used on aluminum and galvanization. Low temperature curing and fast overcoatable.
Features:
Description:
An all-purpose immersion-grade epoxy that has a variety of attributes including low-temperature cure, surface tolerance, fast recoat times, moisture tolerance during application and cure, and excellent corrosion protection. Can be used direct to metal as a corrosion resistant primer, an intermediate coating over itself and many other primers, and can be used as a finish coat. Suitable for both maintenance and new construction projects due to its excellent surface wetting characteristics and quick cure for handling. May also be used for immersion in potable water, fresh or salt water (marine) exposures. Meets IMO performance for ballast tanks for marine vessels.
Features:
Description:
An all-purpose immersion-grade epoxy that has a variety of attributes including low-temperature cure, surface tolerance, fast recoat times, moisture tolerance during application and cure, and excellent corrosion protection. It has low VOC and low HAP's content for use in areas with restricted volatile emissions. Can be used direct to metal as a corrosion resistant primer or as an intermediate coating over other primers. Suitable for both maintenance and new construction projects due to its excellent surface wetting characteristics and quick cure for handling. May also be used for immersion in potable water, fresh or salt water (marine) exposures.
Features:
Description:
High performance, glass-flake filled, cold cure epoxy having excellent film strength and resistance to water, salt water and wastewater exposures. This coating exhibits outstanding moisture tolerance during application, low temperature cure capability, and very fast cure response for quick return to service. Glass flake reinforcement enhances film strength, impact resistance and barrier properties. Can be used on a variety of surfaces including structural steel, piping, pilings, ships, offshore structures and other equipment exposed to industrial or marine environments. It can also be used in immersion service for salt water, process water (non-potable) and waste water treatment projects.
Features:
Description:
High solids, high-build epoxy mastic coating used for atmospheric exposed and submerged steel. Self-priming and normally specified in a two coat system.
Features:
Description:
Versatile corrosion resistant coating. Used either as a primer, intermediate coat, or self-priming finish over steel or zinc primers. May be topcoated with itself, or a broad variety of high performance finish coats. Has surface tolerant properties. It has versatile uses in the marine and offshore industries for both above and below the waterline. Carboguard 885 LT has 35°F cure capability (see seperate data sheet).
Features:
Description:
Versatile corrosion resistant coating. User either as a primer, intermediate coat or selfpriming finish or zinc primers. May be top coated with himself, or a broad variety of high performance finish coats. Has surface tolerant properties.
Features:
Description:
Highly chemical resistant epoxy mastic coating with exceptionally versatile uses in all industrial markets. Self-priming and suitable for application over most existing coatings, and tightly adherent rust. Serves as stand-alone system for a variety of chemical environments and is also designed for various immersion conditions. An optional micaceous iron oxide additive (MIO Filler) can be purchased separately and may be used per the Product Data Sheet to enhance corrosion protection and film strength for more aggressive service such as severe marine or heavy industrial uses.
Features:
Description:
A glass reinforced chemically resistant epoxy coating with wide versatility in all industrial markets. It is self-priming. Glass reinforcement improves internal film strength, hardness, impact, and abrasion resistance. It is often used in severe service (above or below the water line) in marine applications where these resistance qualities are desired.
Features:
Description:
Highly chemical resistant epoxy mastic coating with exceptionally versatile uses in all industrial markets. Self-priming and suitable for application over most existing coatings, and tightly adherent to rust. Excellent for use as a primer or intermediate coat where low temperature cure is needed. Can be used in a variety of chemical environments. May be used as a self-priming or finish coat on exterior exposure if discoloration can be tolerated.
Features:
Description:
Nuclear grade, DBA tested, self priming epoxy. Tested and certified for use in Nuclear Level 1 areas in a variety of systems.
Features:
Description:
High solids, high-build potable water coating widely used for lining interior steel and concrete tanks, valves and pipe. Formulated for application at conventional builds (100 - 250 microns per coat) as well as high builds (250 microns per coat).
Features:
Description:
Carboguard 891 FC is a high solids, high gloss, high build epoxy topcoat.
Features:
Description:
Ultra high solids epoxy that is designed as a liner for potable water, demineralized water, wastewater and many other services. It is widely used as a tank lining for steel and concrete tanks. Product is self-priming and is normally applied in two coats. Formulated for application at conventional builds (4 to 6 mils per coat) as well as high builds (10 mils per coat).
Features:
Description:
High solids corrosion resistant primer and intermediate. Used either as a primer or an intermediate coat over steel and inorganic zinc primers. Can be topcoated with a broad variety of high performance finish coats.
Features:
Description:
Versatile corrosion resistant coating. Used either as a primer, intermediate coat, or self-priming finish over steel and zinc primers. May be topcoated with itself, or a broad variety of high performance finish coats. Product also has surface tolerant properties and low temperature 35 °F (2 °C) cure capability.
Features:
Description:
Versatile corrosion resistant coating with zinc phosphate corrosion inhibitor. Contains additional filler reinforcement (micaceous iron oxide) for enhanced barrier resistant properties. Used either as a primer or intermediate coat over steel, other epoxies or inorganic zinc primers. May be topcoated with a broad variety of high performance finish coats. Has surface tolerant properties. Has optional (LT) cure for 35°F cure capability.
Features:
Description:
Carboguard AQP is a cost-effective abrasion resistant coating with basis of epoxy resin. Corrosion protection system of steel surfaces above and under water. Carboguard AQP is available in NC version (normal cure) and FC version (fast cure), where the NC version is specially applicable for touch-up and stripe coating. Carboguard AQP is well suited for potable water tanks.
Features:
Description:
Carboguard E 19 LT Primer is a versatile epoxy primer with excellent resistance to salts, water and alkalies. Very good resistance to mild acids and solvents.
Features:
Description:
Carboguard E 19 Primer is a versatile epoxy primer with excellent resistance to salts, water and alkalies. Very good resistance to mild acids and solvents.
Features:
Description:
Carboguard SC Primer is an excellent general purpose corrosion primer with good resistance to salts, water and alkalies. Also resistant to splash and spillage from mild acids and solvents. The cured film is tough and abrasion resistant.
Features:
Description:
Carboguard SC Primer LT is an excellent general purpose low-temperature corrosion primer with good resistance to salts, water and alkalies. Also resistant to splash and spillage from mild acids and solvents. The cured film is tough and abrasion resistant.
Features:
Description:
Carbo-Kit Carbocrylic 1295 HS is a high solid topcoat with good weathering capabilities. Offers a glossy, smooth, hard finish that is easy cleanable. Carbo-Kit Carbocrylic 1295 HS is specially designed for application with brush and roller.
Features:
Description:
Carbo-Kit Carbomastic 18 FC is a heavy duty, high build coating for protection of steel in corrosive environments. It is specially designed for application with brush and roller. Carbo-Kit Carbomastic 18 FC is excellent for use at low temperatures and at maintenance.
Features:
Description:
Carbo-Kit Carbohatne 133 HG is a high build, glossy finish that has outstanding weathering resistance and colour retention. Suitable for application over a number of Carboline primers and intermediates, this material provides excellent corrosion resistance in a broad range of colours.
Features:
Description:
Carbo-Kit Carboxane 2000 Topcoat is a topcoat with excellent weathering properties. The product is specially designed for application with brush and roller. It is excellent for use at maintenance.
Features:
Description:
Carbo-Kit Carbozinc 858 is a high solid, organic zinc epoxy primer designed for corrosion protection of structural steel in salt and weathering environments. Carbo-Kit Carbozinc 858 is specially designed for application with brush and roller. It is excellent for use at maintenance.
Features:
Description:
Carbo-Kit Pyroclad X1 is designed to provide jet fire and hydrocarbon fire protection for structural elements, beams, columns, bulkheads, underdecks and risers. Carbo-Kit Pyroclad X1 is suitable for applications in the industrial, petrochemical, oil and gas, offshore and refining industries.
Features:
Description:
Aluminum-pigmented, low-stress, high-solids mastic with outstanding performance properties and proven field history. Carbomastic 15 was the pioneer mastic coating in a number of industrial markets and today still provides unmatched levels of barrier protection and corrosion resistance over existing finishes and rusted or SSPC-SP2 or SP3-cleaned steel.
Features:
Description:
Carbomastic 15 LT is a high build coating with excellent adhesion to rusted steel and most aged coatings.
Features:
Description:
Carbomastic 15 LT Atex is a high build coating with excellent adhesion and low temperature (ambient) curing. It is a modified epoxy mastic with antistatic and dissipative agents according to CEI EN 60079 ( electric construction for explosive gas atmospheres).
Features:
Description:
This epoxy is a fast-curing, heavy-duty, high-build anti-corrosive coating with a broad and versatile list of uses in marine and other corrosive environments. It is an excellent choice for the protection of ship hull exteriors, underwater and ballast tanks. Offshore applications include splash zone, sub-sea, jackets, production decks, drilling rig legs and pontoons in immersed exposures.
Features:
Description:
Carbomastic 18 FC Metallic is a heavy duty, high build coating for protection of steel in corrosive environments. Contains additional filler reinforcement (micaceous iron oxide) for enhanced barrier resistant properties. Carbomastic 18 FC Metallic is excellent for use at low temperatures.
Features:
Description:
Carbomastic 18 NT is a heavy duty, high build coating for protection of steel in corrosive environments. Gives a hard and smooth surface with excellent flexibility.
Features:
Description:
Aluminium-pigmented high solids mastic with excellent barrier- and corrosion resistance. Carbomastic 19 AL is specifically designed for maintenance operations and has a high aluminium loading. Easy to apply with spray, brush and roller on top of existing coatings, rusted and St2/St3 cleaned steel.
Features:
Description:
Corrosion resistant epoxy mastic with very good protection against fresh- and salt water.
Features:
Description:
Aluminum-pigmented, low temperature curing mastic designed for cold weather applications down to 0 °F (-18 °C). This unique coating provides excellent corrosion resistance over existing finishes and rusted or SSPC-SP2 or SP3- cleaned steel.
Features:
Description:
Carbomastic 25 gives a smooth and hard surface. The coating is very solid and provides excellent protections against corrosion. Carbomastic 25 is suitable at application at low temperatures.
Features:
Description:
High performance epoxy that has excellent resistance to fresh and salt water exposures. This coating exhibits outstanding moisture and surface tolerance during application, low temperature cure capability, and very fast cure response for quick return to service. It contains an inert flake reinforcement (micaceous iron oxide) to enhance film strength and performance. This product is ideal for industrial or heavy duty marine environments for the protection of steel against salt laden environments.
Features:
Description:
High performance, aluminum-filled epoxy that has excellent resistance to fresh and salt water exposures. This coating exhibits outstanding moisture and surface tolerance during application, low temperature cure capability, and very fast cure response for quick return to service. This aluminum-pigmented epoxy also contains inert flake reinforcement (micaceous iron oxide) to enhance film strength and performance.
Features:
Description:
Epoxy primer for surface treatment of concrete flooring and other cement-based surfaces. Provides excellent anchoring to the substrate when using Carboseal epoxy systems.
Features:
Description:
Used as seamless epoxy flooring on concrete exposed to medium to high wear in all types of industries, institutional and industrial facilities, workshops and warehouses.
Features:
Description:
High build, low sheen finish that has excellent resistance to corrosion, chemicals and abrasion. Suitable for application over a number of Carboline primers and intermediates, this material provides very good weathering performance in a broad range of colors.
Features:
Description:
High build, glossy finish that has outstanding weathering resistance and colour retention. Suitable for application over a number of Carboline primers and intermediates, this material provides excellent corrosion resistance in a broad range of colours.
Features:
Description:
Thin film, high gloss finish with exceptional weathering performance characteristics. Used extensively in virtually all industrial markets, 134 HG provides a smooth, durable finish that has superior resistance to corrosion, abrasion and chemical exposure.
Features:
Description:
Thin film, high gloss finish with exceptional weathering performance characteristics. Used extensively in virtually all industrial markets, it provides a smooth, durable finish that has superior resistance to corrosion, abrasion and chemical exposure.
Features:
Description:
Carbothane 134 HP Clear is a coat finish that provides added UV protection over pigmented Carboline polyurethanes.
Features:
Description:
A glossy, tile-like polyurethane topcoat which produces a smooth, slick and tough, easy to clean surface. Carbothane 134 PU has very good resistance to splash and spillage af acids, alkalies, most solvents and excellent splash and spillage resistance to salts and water
Features:
Description:
CARBOTHANE 147 a glossy, tile-like attractive topcoat, produces a smooth, slick and hard film. It exhibits excellent resistance to splash and spillage of salts and water. It is easily applied by airless or conventional spray.
Features:
Description:
Carbothane 156 SG is a semi gloss finish. Suitable for application over a number of epoxy primers and intermediates, and can be applied directly on galvanized steel. Carbothane 156 SG provides good weathering performance in a broad range of colours with a surface that is easy to keep clean.
Features:
Description:
Carbothane 834 (also known as Carbothane 134 HP), is an attractive, high gloss, high solids urethane topcoat which is easily applied by airless or conventional spray to yield a hard, very cleanable surface. It exhibits excellent flow and leveling properties to minimize dry spray and lampmarks.
Features:
Description:
Carbothane 8810 is a corrosion protective coating:weathering resistant and colour stable. Gives a smooth and hard, easily cleanable surface with excellent resitance against splash and spillage of acids, alkalies, solvents, salt and water. Good abrasion resistance.
Features:
Description:
Carbothane 8814 is a corrosion protective coating; weathering resistant and colour stable. Gives a smooth and hard, easily leanable surface with excellent resistance against splash and spillage of acids, alkalies, solvents, salt and water. Good abrasion resistance.
Features:
Description:
Carbothane 8814 FC is a corrosion protective coating; weathering resistant and colour stable. Gives a smooth and hard, easily leanable surface with excellent resistance against splash and spillage of acids, alkalies, solvents, salt and water. Good abrasion resistance.
Features:
Description:
Carbotherm 3300 is a ceramic blend insulative composite coating formulated in a high temperature resistant acrylic binder. It is ideally suited as a protective heat barrier to shield personnel from hot surfaces. It also inhibits heat transfer into or out of a structure. Its insulative properties keeps structures exposed to solar radiation significantly cooler. It can be used to minimize or eliminate sweating of pipes or other operating equipment.
Features:
Description:
Carbotherm 551 is a unique insulative composite coating formulated in a high temperature resistant epoxy binder. Unlike acrylic-based insulative materials it has superior toughness, hardness, impact resistance, chemical resistance and permeation resistance. It is therefore more suitable for industrial applications or other physically demanding environments. It is an ideal protective heat barrier to shield personnel from hot surfaces. It also inhibits heat transfer into or out of a structure. Its insulative properties keeps structures exposed to solar radiation significantly cooler. It can be used to minimize or eliminate condensation of pipes or other operating equipment. Its superior application properties of higher film build per coat and fewer coats offers savings and quicker return to service. Because it bonds directly to the surface (unlike standard insulation materials) it minimizes water entry and the effect of corrosion under insulation.
Features:
Description:
A weldable pre-construction inorganic zinc primer for shop use only.
Features:
Description:
Carboxane 2000 is an isocyanate free, ultra-durable coating that provides outstanding color and gloss retention as well as excellent corrosion protection for exterior exposures. When used over a suitable primer (as a two coat system) Carboxane 2000 provides the barrier, corrosion resistance properties, and weatherability normally achieved with a three-coat system (primer, epoxy intermediate with an acrylic-polyurethane finish) for most environments. This significantly speeds up the painting process, saves labor, and saves money without sacrificing performance. This tightly cross-linked film utilizes a UV-resistant siloxane binder resulting in a finish with excellent corrosion protection and weathering performance that far exceeds aliphatic polyurethanes.
Features:
Description:
Carboxane 2000 Topcoat is an advanced topcoat with outstanding gloss and color retention for exterior exposures. Provides a high gloss surface and can be used where polyurethane coatings is not desired.
Features:
Description:
Carboxane 2000 WG is a combined inter-mediate/topcoat with excellent weathering properties.
Features:
Description:
Carboxane 2434 is a topcoat with EXTREMELY high weatherability, high gloss and colour retention. Excellent resistance to splash and spillage of petroleum products, dilute acids and alkalies.
Features:
Description:
Time-tested corrosion resistant coating that provides excellent galvanic corrosion protection to steel in some of the harshest environments. For over five decades, Carbozinc 11 has been the industry standard for high-performance inorganic zinc protection on steel structures worldwide.
Features:
Description:
Time-tested corrosion resistant technology that protects steel galvanically in the harshest environments. For over five decades, Carbozinc 11 Series primers have been the industry standard for high-performance inorganic zinc protection on steel structures worldwide. Carbozinc 11 FC is a faster-cure formulation that allows fast topcoating times making it ideal for quick turn around projects.
Features:
Description:
Ultra-low VOC member of the Carbozinc family with extraordinary corrosion resistance properties. Carbozinc 11 HS combines unparalleled performance characteristics with an ultra-low VOC formulation that meets some of the most stringent VOC restrictions.
Features:
Description:
Carbozinc 11 WB is a water-based inorganic zinc rich primer that protects steel galvanically, eliminating subfilm corrosion. It meets VOC regulations while providing the proven performance of silicate zinc rich technology. It may be used as a primer under many different types of topcoats.
Features:
Description:
Carbozinc 658 P is high solids, organic zinc epoxy primer, for protection of structural steel in salt or weathering environments. Excellent as a maintenance or general use zinc epoxy primer over blasted steel. Used within industry, petrochemical process, offshore or other heavy industries in severe environments with appropriate topcoats. Recommended for shop application where fast handling and re-coating are requested.
Features:
Description:
A two-component, high solids, zinc rich epoxy primer formulated for the protection of properly prepared steel substrates. This product can be applied by conventional or airless spray. Recommended for Original Equipment Manufacturers where a high performance, highly corrosion resistant zinc primer is desired.
Features:
Description:
Carbozinc 858 is a high solid, organic zinc epoxy primer designed for corrosion protection of structural steel in salt and weathering environments. The paint is easy to apply and protects steel galvanically. Provides tough and abrasion resistant film.
Features:
Description:
Low VOC organic zinc epoxy steel primer with extremely fast cure-to-topcoat characteristics for in-shop applications and quick turnaround requirements in the field. Carbozinc 859 has less than 3 lbs/gallon (359.5 g/l) VOC (thinned) and is used extensively in virtually all industrial markets.
Features:
Description:
A two-component, high solids, zinc rich epoxy primer formulated for the protection of properly prepared steel substrates. This product can be applied by conventional or airless spray. Recommended for Original Equipment Manufacturers where a high performance, highly corrosion resistant zinc primer is desired. Typical applications include marine, offshore drilling equipment, truck trailer chassis, underbodies and related equipment, industrial and off-road machinery, electrical transformers, industrial tanks, vessels, pumps and processing equipment.
Features:
Description:
A single component, water-based coating which is designed to remove thick-film elastomers from steel substrates.
Features:
Description:
Firefilm 70-60 HF is a thin film coating for protection for protection of indoor steel constructions.
Features:
Description:
Firefilm FC2 is a low VOC, one coat, high build system, based on patented technology. It provides a fast cure effective structural fire performance, for steelwork, with up to a 120-minute fire rating
Features:
Description:
A solvent-free epoxy designed and uniquely formulated for use as a coating for aluminum casting quench pit environments. It has been tested by the Aluminum Association and found suitable for this use. In many cases it can be used as a one-coat system direct to steel or concrete. Has excellent wetting and flow properties and can be spray, brush or roller applied. It has a workable pot life (90 minutes at 75°F) and while plural spray equipment may be used, it is not required.
Features:
Description:
Finish coat with good weathering resistance. Easy to apply and maintain for application on wood, steel, roof tiles and corrugated iron.
Features:
Description:
A tank lining holding primer that has a variety of attributes including low-temperature cure, fast recoat times, moisture tolerance during application and cure, and excellent blast-hold protection. Phenoline 311 Primer is often used with thick film lining systems as a holding primer (maintain blast cleaning) and is suitable for both new tanks and relines. It exhibits excellent surface wetting characteristics and quick cure for handling. It contains high levels of inert flake reinforcement. Excellent for use as a bonding primer for linings when damp concrete or masonry substrates are encountered.
Features:
Description:
Phenoline 341 is a solventless epoxy lining for a variety of cargos including water, potable water, wastewater, seawater, fuels, crude oils, and other solutions. It is applied by standard airless spray equipment, as a single coat lining for ballast tanks or other storage vessels. It is acceptable for use as a lining for potable water tanks of 75 gal or larger and pipe diameters of 16 inches or larger.
Features:
Description:
Phenoline 353 is a highly cross-linked epoxy lining with extraordinary overall chemical resistance and versatility. It has a unique blend of resins that make it highly resistant to a variety of aggressive cargos like gasoline, gasoline blends, biodiesel, fuel oils, and others. It can be used is both acidic and high temperature caustic exposures. Markets served are terminals, refineries, petrochemical, wastewater, railcar linings, and many others.
Features:
Description:
Phenoline 353 LT is a highly cross-linked epoxy lining with extraordinary overall chemical resistance and versatility. It has a unique blend of resins that make it highly resistant to a variety of aggressive cargos like gasoline, gasoline blends, biodiesel, fuel oils, and others. It can be used in both acidic and high temperature caustic exposures. Markets served are terminals, refineries, petrochemical, wastewater, railcar linings, subsea oil and gas equipment, and many others. This low temperature cure formulation allows application and curing down to 35°F (2°C).
Features:
Description:
Single-coat, plural-component applied, ultra-high build coating for use on steel and concrete substrates where rapid cure characteristics are required. Phenoline 380 has the same application and physical properties of Phenoline 379 but also provides rapid cure to handle and cure characteristics.
Features:
Description:
High performance, high solids, epoxy lining that is recommended for a variety of petroleum storage products including 180°F (82°C) crude oil, demineralized water 150°F (65°C), crude/water mixtures, fuel oil, jet fuel, biodiesel, and gasoline. It is also a good choice for wastewater and water exposures. Product is self-priming and is normally applied in two coats. It is also suitable for food-grade (aqueous) cargos and meets the FDA requirements for 21CFR 175.300 for direct food contact.
Features:
Description:
This product is a solvent-free, high performance epoxy coating designed as an internal tank, valve and pipe lining for chemical or other commodity storage. It is a unique blend of resins and curing agents that allow batch mixing for ease of application. Plural component spray equipment is not required. The product is blush resistant and is typically applied at film thicknesses of 20 mils (500 microns) or thicker as needed (tank floors). It can handle exposures typically seen in the oil and gas industries; crude oils and fuels. It is resistant to NGL condensates, produced water, brines, industrial process water, waste water, and sewage. Ideal for municipal wastewater and water treatment facilities.
Features:
Description:
This product is a solvent free, low temperature cure, high performance epoxy lining designed to handle common cargoes in the oil and gas industry including crude oil, gasoline, jet fuels, and diesel. . It is resistant to NGL condensates, produced water, brines, industrial process water, waste water, and sewage. Ideal for Municipal wastewater and water treatment facilities. It can handle deionized water up to 180°F (82°C) and is applied at film thicknesses of 20-60 mils (500-1500 microns) in a non-blushing, single coat application. Tank Shield Plus has good elongation and proprietary reinforcement which enables it to bridge perforations which may occur from bottom side corrosion. Tank Shield Plus remains water tight over a hole in 2 atmospheres of head pressure.
Features:
Description:
This high performance glass-flake filled coating was designed for application over steel or concrete in extreme chemical exposures. It is resistant to a wide variety of aggressive chemicals, including organic and inorganic acids, most alkalies, and many solvents. It is ideally suited for immersion service as internal steel tank linings, as well as for aggressive chemical splash, spill, and fume exposures on structural steel. Typical uses include steel tank and vat linings, secondary containment, structural steel, process floors, grating, sumps and trenches, scrubbers, and clarifiers.
Features:
Description:
PLASITE 4550 is a 100% solids, reinforced, premium novolac epoxy coating for internal tank lining. It is resistant to a broad range of chemicals such as fuels, salts, alkalis, strong inorganic acids, some solvents, sour crude oil and 98% sulfuric acid.
Features:
Description:
PLASITE 4550 S is a 100% solids, flake filled, premium novolac epoxy coating designed for internal steel and concrete substrates. It is a two component system consisting of four-parts by volume of Part A resin and one part by volume of Part B hardener. It is applied by plural component or single component spray equipment, from a total thickness of 20-60 mils (500-1500 microns) in a single coat application for a variety of applications. This product has been tested and is approved for crude oil storage and transportation up to 350°F (177°C). It has superior thermal shock resistance over the range -40° to 350°F (-40 to 177°C). Typical Uses: Crude oil tankers, chemical storage tanks, wastewater clarifiers, plating vats, oil storage tanks, catwalks, pulp and paper liquor tanks or concrete exposures in wastewater applications.
Features:
Description:
Plasite 4555 S is a 100% solids, flake-filled, premium novolac epoxy coating designed for internal steel and concrete tanks and pipe lining. It is a two component system consisting of 4-parts by volume of Part A resin and one part by volume of Part B hardener. It is applied by plural component or single component spray equipment, in a one-coat application (25-30 mils) for internal lining applications.
Features:
Description:
Plasite 4660 provides outstanding chemical resistance, abrasion and corrosion protection to a wide variety of steel and concrete substrates in aggressive environments at elevated temperatures. It’s application range includes internal coating for storage tanks for crude oil, hydrocarbons, chemicals and process & pressure vessels of all kinds. Approved for use in potable water tanks at temp. up to 85°C.
Features:
Description:
This lining-grade epoxy has wide chemical resistance and is suitable for use as a chemically resistant coating for aggressive atmospheric exposures or as a lining for a variety of chemical exposures. It is suitable for use in food-grade service where product purity (taste and odor) are critical. It has excellent abrasion and thermal shock resistance.
Features:
Description:
This lining-grade epoxy has wide chemical resistance and is suitable for use as a chemically resistant coating for aggressive atmospheric exposures or as a lining for a variety of chemical exposures. It is suitable for use in food-grade service where product purity (taste and odor) are critical. Specially formulated with high abrasion resistant fillers for outstanding abrasion and thermal shock resistance.
Features:
Description:
This lining-grade epoxy has wide chemical resistance and is suitable for use as a chemically resistant coating for aggressive atmospheric exposures or as a lining for a variety of chemical exposures. It is suitable for use in food-grade service where product purity (taste and odor) are critical. It has excellent abrasion and thermal shock resistance. It has superior release properties to reduce or avoid issues with product cargoes such as sticking, hang-ups or bridging.
Features:
Description:
A cross linked epoxy-phenolic cured with a polyamine curing agent. Formulated with particular attention to wide chemical resistance and ease of handling. Plasite 7122 VAR, is an abrasion resistant tank lining and industrial maintenance coating.
Features:
Description:
A cross linked epoxy-phenolic cured with a polyamine curing agent. Formulated with particular attention to wide chemical resistance and ease of handling. Plasite 7122 VOC is used as a tank lining and for industrial maintenance.
Features:
Description:
A cross linked epoxy-phenolic cured with a polyamine curing agent. Formulated with particular attention to wide chemical resistance and ease of handling. Plasite 7122 VTF, is a PTFE filled tank lining for use where the surface requires release properties to reduce product sticking and bridging.
Features:
Description:
A water-resistant, phenolic epoxy coating polymerized with a polyamine type curing agent. A high performance lining for elevated temperature and pressure immersion services in high purity water, as well as the oil/water separating processes encountered in the petroleum industry.
Features:
Description:
A water-resistant, phenolic epoxy coating polymerized with a polyamine type curing agent. A high performance lining for elevated temperature and pressure immersion services in high purity water, as well as the oil/water separating processes encountered in the petroleum industry. This HAR version of Plasite 7159 is extremely abrasion resistant.
Features:
Description:
A high solids modified epoxy cured with an amine adduct curing agent. Designed specifically as a highly chemical-resistant, non-toxic, tank lining.
Features:
Description:
Plasite 9060 LT is a high performance tank lining with curing characteristics allowing the coating to be applied and cure at temperatures as low as 35°F (2°C) while achieving unmatched chemical resistance in caustic, acid and solvent service. The diversity of chemical resistance and unique low temperature curing allows the owner flexibility with their equipment. For industrial use only.
Features:
Description:
Polyclad 704 is a very high performance structural coating. The product is designed to be used on steel pipe exteriors, coating girth welds on steel pipe and other repairs ( PE, PP, etc.) as recommended.
Features:
Description:
Polyclad 767 is a high performance pipe coating specially designed for the protection of pipeline interiors. Typical applications are pipeline interiors for water transmission, wastewater treatment (municipal and industrial), and interior tank linings.
Features:
Description:
Polyclad 777 Fast Set is a high performance 100% solids structural polyurethane designed to provide superior corrosion protection for steel, ductile iron and concrete pipe. Tenacious adhesion and high impact resistance allow its use in the harshest environments. It forms a dense, long-term impermeable barrier that is ready for service moments after application through a snap-set cure mechanism. Typical uses include steel pipeline exteriors, steel valves & fittings, steel pilings, steel poles (above & below ground), buried tank exteriors, penstocks. No primer is required. Available in snap, fast, medium and slow set times.
Features:
Description:
Polyclad 777 Medium Set is a high performance 100% solids structural polyurethane designed to provide superior corrosion protection for steel, ductile iron and concrete pipe. Tenacious adhesion and high impact resistance allow its use in the harshest environments. It forms a dense, long-term impermeable barrier that is ready for service moments after application through a snap-set cure mechanism. Typical uses include steel pipeline exteriors, steel valves & fittings, steel pilings, steel poles (above & below ground), buried tank exteriors, penstocks. No primer is required. Available in snap, fast, medium and slow set times.
Features:
Description:
Polyclad 777 PL is a high performance 100% solids structural polyurethane designed to provide superior corrosion protection for steel, ductile iron and concrete pipe. Typical uses include pipeline exterior surfaces. Tenacious adhesion and high impact resistance allow its use in the harshest environments. It forms a dense, long-term impermeable barrier that is ready for service moments after application through a fast-set cure mechanism. No primer is required.
Features:
Description:
Polyclad 777 Slow Set is a high performance 100% solids structural polyurethane designed to provide superior corrosion protection for steel, ductile iron and concrete pipe. Tenacious adhesion and high impact resistance allow its use in the harshest environments. It forms a dense, long-term impermeable barrier that is ready for service moments after application through a snap-set cure mechanism. Typical uses include steel pipeline exteriors, steel valves & fittings, steel pilings, steel poles (above & below ground), buried tank exteriors, penstocks. No primer is required. Available in snap, fast, medium and slow set times.
Features:
Description:
Polyclad 777 R is a high performance, 100% solids structural polyurethane designed to repair Polyclad 777 or 777 PL when it has been damaged. It can be used on steel pipe exteriors, coating girth welds on steel pipe and other repairs as recommended.
Features:
Description:
Polyclad 951 flowliner is an epoxy lining for “dry” natural gas transmission pipelines. It is designed to increase flow efficiency of natural gas in pipelines. This lining provides a smooth surface inside the pipe that will increase flow and reduce energy cost of transporting natural gas. Polyclad 951 offers corrosion protection of pipes during storage. It fully meets criteria of API RP 5L2 for gas transmission pipelines.
Features:
Description:
Polyclad 952 flowliner is an epoxy lining for “dry” natural gas transmission pipelines. It is designed to increase flow efficiency of natural gas in pipelines. This lining provides a smooth surface inside the pipe that will increase flow and reduce energy cost of transporting natural gas. Polyclad 952 offers corrosion protection of pipes during storage. It fully meets criteria of API RP 5L2 for gas transmission pipelines.
Features:
Description:
A solvent-less, high gloss, smooth epoxy coating for the lining of gas transmission pipelines. It’s hard, smooth surface aids in the flow of gas by reducing turbulence while protecting the interior surfaces from corrosion. It has excellent flow and wetting characteristics ideal for this type of application and use. Tested in accordance with API RP 5L2 for gas transmission pipelines.
Features:
Description:
Polyclad 975 is an advanced 100% solids, hybrid epoxy pipeline coating. Polyclad 975 has performance properties designed for corrosion protection of steel and ductile iron pipe exteriors, girth welds or tie-ins. It can be used for new pipe or rehabilitation of coated pipe. Polyclad 975 cures fast to allow quick QC and backfill times.Polyclad 975 is designed for spray application. Use Polyclad 975 H for hand applied applications.
Features:
Description:
Polyclad 975 H is an advanced 100% solids, hybrid epoxy pipeline coating. It has performance properties designed for corrosion protection of steel and ductile iron pipe exteriors, girth welds or tie-ins. Polyclad 975 H cures fast to allow quick QC and backfill times. H in 975 H stands for hand applied version. Polyclad 975 is the spray version.
Features:
Description:
Polyclad ARO is a high performance pipe coating specially designed for the protection of FBE coated pipeline from gouge and mechanical damage during directional drilling or slip bore installations. Polyclad ARO is applied directly over FBE as an abrasion resistant overlay (ARO) and provides superior protection in rocky, rough and mountainous environments. It absorbs the destructive energy and minimizes coating damage.
Features:
Description:
Pyroclad X1 is designed to provide jet fire and hydrocarbon fire protection for structural elements, beams, columns, bulkheads, underdecks and risers. Pyroclad X1 is suitable for applications in the industrial, petrochemical, oil and gas, offshore and refining industries.
Features:
Description:
A 55 lb./ft³ (881 kg/m³) density, Portland cement based, cementitious fireproofing. It provides both hydrocarbon and cellulosic fire protection for structural steel and can also be used to upgrade the fire resistance of existing concrete. Recommended areas of application include refineries, petrochemical, pharmaceutical facilities, pulp and paper mills, offshore platforms, nuclear and conventional power plants, factories, warehouses, institutional and biomedical facilities.
Features:
Description:
A 70 lb./ft³ (1,121 kg/m³) density, Portland cement based, cementitious fireproofing. It provides both hydrocarbon and cellulosic fire protection for structural steel and can also be used to upgrade the fire resistance of existing concrete. Recommended areas of application include refineries, petrochemical, pharmaceutical facilities, pulp and paper mills, offshore platforms, nuclear and conventional power plants, factories, warehouses, institutional and biomedical facilities.
Features:
Description:
A 50 lb./ft³ (800 kg/m³) density, Portland cement based, cementitious fireproofing. It provides both hydrocarbon and cellulosic fire protection for structural steel and can also be used to upgrade the fire resistance of existing concrete. Recommended areas of application include refineries, petrochemical, pharmaceutical facilities, pulp and paper mills, offshore platforms, nuclear and conventional power plants, factories, warehouses, institutional and biomedical facilities.
Features:
Description:
A 40 lb./ft³ (640 kg/m³) density, Portland cement based, cementitious fireproofing. It provides both hydrocarbon and cellulosic fire protection for structural steel and can also be used to upgrade the fire resistance of existing concrete. Recommended areas of application include refineries, petrochemical, pharmaceutical facilities, pulp and paper mills, offshore platforms, nuclear and conventional power plants, factories, warehouses, institutional and biomedical facilities.
Features:
Description:
Rustbond FC is a cross-linked penetrating primer/sealer with excellent wetting properties. It is highly flexible with good chemical and solvent resistance, and accept a variety of topcoats. Recommended use as primer/sealers for marginally prepared steel and over old coatings. Its excellent wetting properties allows it to penetrate rust and discontinuities in existing coatings and provide a firm anchorage for a variety of topcoats. Its thixotropic character reduces run off, ensuring that the edges of existing coatings are encapsulted thus reducing undercutting and peeling. It may also be used as a tie-coat for coatings that exceed their “recoat window.” Consult Carboline Technical Services Department for specific recommendations.
Features:
Description:
Universal bonding primer that adheres tenaciously to virtually any surface including difficult-to-coat substrates like galvanized and stainless steel, aluminum, PVC, FRP and ceramic tile. Designed for topcoating with most generic types.
Features:
Description:
Two part epoxy exhibiting superior adhesion to concrete and steel. Used primarily as a primer/sealer for concrete surfaces and top coated with a variety of chemically resistant toppings.
Features:
Description:
High performance lining system designed for concrete. Semi-leveling coating which may be applied as an aggregate filled and/or reinforced coating system. Specially formulated to withstand some of industry’s most aggressive chemicals.
Features:
Description:
100% solids, high performance, novolac epoxy lining system designed for concrete. It is a semi-leveling coating and may be applied as an aggregate filled and/or reinforced coating system. Specially formulated to withstand some of industry’s most aggressive chemicals, including 98% sulfuric acid, as well as many organic chemicals and solvents.
Features:
Description:
High performance, 100% solids, novolac epoxy coating designed for concrete protection against chemical attack and physical abuse. This coating has been specially formulated with vertical film build characteristics for application to walls (and floors alike) to provide an outstanding barrier against some of industry’s most aggressive chemicals, including 98% sulfuric acid as well as many organic chemicals and solvents.
Features:
Description:
Solvent-free patching compound used for repairing pits, cracks and voids in steel, concrete, wood and other surfaces. Has the unique ability to be mixed, applied and cured underwater.
Features:
Description:
Surface Cleaner 3 is designed for use with airless cleaning equipment and manual use. It removes oil, grease, etc. from heavily contaminated surfaces resistant to strong alkaline detergents such as construction equipment, plastic covers, workshop floors, - walls, - roofs etc.
Features:
Description:
A surface treatment agent for preparing previously coated surfaces for recoating after they have been allow to cure past recommended recoating times, or have been exposed to sunlight for extended periods of time. This treatment ensures good adhesion between coats.
Features:
Description:
A heat resistant primer for use on steel substrates that may reach up to 800°F (426°C).
Features:
Description:
Thermaline 400 GS is an epoxy-phenolic coating specifically formulated to handle high temperature (400°F/204°C) steel substrates exposed to conditions typically found under insulation. It has exceptional resistance to wet/dry heat cycling exposures found in these applications. It satisfies the NACE Standard Practice (SP0198) to handle corrosion under insulation (CUI) for both carbon steels and austenitic stainless steel substrates at elevated temperatures.
Features:
Description:
Thermaline 4000 is a high heat polymer coating used for the protection of equipment operating at elevated temperatures. It is typically used over Carbozinc® inorganic zinc primers for outstanding corrosion protection and heat resistance. The combination of the zinc primer with this finish provides exceptional performance in durability. Unlike most high temperature silicone-based technologies with soft films, Thermaline 4000 does not require a heat cure for film forming properties. It cures hard rapidly under ambient conditions (humidity greater than 30%).
Features:
Description:
A single-component, high performance coating which has outstanding resistance to wet/dry cycling conditions at elevated temperatures. Film is internally reinforced with a combination of aluminum and micaceous iron oxide (MiO) flake for superior barrier and thermal shock resistance. While it is typically used to protect steel substrates under insulation operating up to 1200°F/649°C, it can also be used on non-insulated steel surfaces. It can handle cryogenic exposures and will cure effectively at ambient conditions to provide corrosion protection without additional heat curing. It has excellent chemical resistant properties to handle the corrosive effects of wet insulation under thermal cycling conditions. This product is recommended for CS-6 and SS-5 systems of NACE SP0198 Standard Practice for coatings to control corrosion under insulation (CUI).
Features:
Description:
Thermaline 440 (formerly Thermaline 400 EU) is a high performance, immersion grade coating system which has excellent resistance to wet/dry cycling conditions at elevated temperatures.
Features:
Description:
A high performance immersion-grade coating system which has excellent resistance to wet/dry cycling conditions at elevated temperatures. It is typically used on hot steel substrates under insulation operating continuously up to 400°F, 204°C. It has excellent chemical resistance properties to handle the corrosive effects of wet insulation under thermal cycling conditions. This coating is recommended for NACE SP0198 Standard Practice for coatings to control corrosion under insulation (CUI) system numbers CS-1, CS-3, CS-4, SS-1, SS-2, and SS-3.
Features:
Description:
Single package medium to high temperature coating that withstands continous temperature up to 400ºC peaks up to 540ºC.
Features:
Description:
High-performance finish for areas exposed to extreme temperatures. Suitable for service from 400°F-1004°F (204°C-540°C) Color stability at maximum temperature will depend on color selected.
Features:
Description:
High-performance finish for areas exposed to extreme temperatures. Suitable for service from 400°F-1004°F (204°C-540°C) Color stability at maximum temperature will depend on color selected.
Features:
Description:
Air-dried coating available in colors and suitable for high temperature exposures up to 273°C (525°F). Air-drying characteristics allow for faster handling of in-shop applications than with other high-temperature coatings. Heat cure above 149°C (300°F) is recommended and will impart added strength and integrity to the coating.
Features:
Description:
Air-dried coating suitable for high temperature exposures up to 525°F (273°C). Air-drying characteristics allow for faster handling of in-shop applications than with other high-temperature coatings. Heat cure above 300°F (149°C) is acceptable and will impart added strength and integrity to the coating.
Features:
Description:
A high performance product which has excellent resistance to dry cycling conditions at elevated temperatures. Used to protect steel substrates for atmospheric exposure and under thermal insulation up to 295°C.
Features:
Description:
This is an extreme performance coating for hot, cryogenic and cycling exposures. Thermaline Heat Shield contains a unique blend of plate-like reinforcing pigments fortified with an inert polymeric matrix. The resulting film provides an outstanding barrier against corrosives and harsh exposures typically seen in elevated temperature environments. This versatile coating is ideal for all piping, vessels and equipment operating from cryogenic conditions up to 1200°F. It is particularly well suited to prevent corrosion under insulated equipment/piping for both carbon steel substrates and stainless steels. This fortified coating has superior shop handling properties over standard silicone coatings (see Curing). It is recommended for CS-6 and SS-5 systems of NACE SP0198 Standard Practice for coatings to control corrosion under insulation (CUI).
Features:
Description:
A water based mastic that can be applied to electrical cables to retard fire propagation. Once applied, it meets code and insurance requirements for interior and exterior use. It provides a hard and flexible surface that will not dust, flake, or spall.
Features:
Description:
Thermo-Lag 3000-P is a petrochemical grade, 100% solids epoxy based intumescent designed to fireproof steelwork for up to a 4 hour fire rating, depending on the design. The recommended use for this product is fireproofing of steel beams, columns, tubes, pipes, vessel skirts, bulkheads, underdecks and electrical raceways.
Features:
Description:
Thermo-Lag 3000-SP is a petrochemical grade, 95% solids epoxy based intumescent designed to fireproof steelwork for up to a 4 hour fire rating, depending on the design. The recommended use for this product is fireproofing of steel beams, columns, tubes, pipes, vessel skirts, bulkheads, underdecks and electrical raceways.